Parallel Plate Interferometer with a Reflecting Mirror for Measuring Angular Displacement

A parallel plate interferometer with a reflecting mirror for measuring angular displacement is proposed. A deflection angle of a beam caused by an angular displacement is amplified by use of a reflecting mirror to increase the optical path difference (OPD) in the plane-parallel plate, which provides high sensitivity of the phase measurement. Detection of light transmitted through the plane-parallel plate with a position sensitive detector (PSD) enables high accurate measurement of the initial angle of incidence to the plane-parallel plate with insensitivity to stray light. The improved parallel plate interferometer achieves a measurement repeatability of 10⁻⁸ rad.     

Measurement Error Correction for Distributed Properties – Filter Cake Thickness Measurements

The measurement of a distributed property is frequently encountered in engineering applications. The impact of a possible measurement error on the measured distribution is described and two methods to account for such an error are detailed: A Fourier transform based deconvolution procedure and a moment based deconvolution approach via kernel estimators are presented. The deconvolution methods can be used in many particle characterization and process applications where particle features or properties are commonly presented in a distributed form. In the current instance, these methods are carefully explored by using artificially generated data and applied to experimental data obtained from filter cake thickness measurements.     

基于Hilbert变换的相空间重建方法在HLS逐束团测量系统中的应用

引入基于Hilbert变换的相空间重建手段, 对合肥光源(HLS)逐束团测量系统采集的数据进行了全面的分析, 其中包括单个束流位置监测器(BPM)数据的相空间重建, 逐圈逐束团振荡相位信息、束团振荡模式信息、逐束团横向工作点(tune值)变换. 提出了新的分析束团tune值的手段, 提供传统方法无可比拟的更高的时间和频率分辨率. 还对不同模式的阻尼率进行了计算, 这为衡量逐束团反馈系统的效果提供了确实可靠的方法.     

北京同步辐射装置3W1B软X射线光束线偏振特性测量

应用自行研制的Mo/Si周期多层膜作为起偏器和检偏器的光学元件, 测量了北京同步辐射装置3W1B束线的偏振状态. 通过数据分析, 得到了3W1B软X射线的有关偏振参数, 在86—89eV能区经过起偏器后的偏振度超过98%, 圆偏振分量介于1%—3%之间.     

Neural network applied to reconstruction of complex objects based on fringe projection

The neural network has been introduced into the reconstruction of the complex object based on fringe projection. In this method, the neural network with powerful property of approximation is used to get the continuous approximate function of a discrete fringe pattern captured by an image frame grabber. The depth-related phase of the measured object modulated into the fringe pattern can be demodulated by dealing with the approximate function. Compared with the Fourier transform profilometry (FTP), in the network method, one deformed fringe pattern is needed to reconstruct the tested object, and a high spatial resolution is maintained for no filtering process. Therefore, this method performs better than FTP in the measurement of the complex object. Moreover, the network method is capable of demodulating more depth-related phase even in the case that the local shadow exists in the fringe pattern. Computer simulations and experiments validate the feasibility of this method.     

Thin film stress measurement by instrumented optical fibre displacement sensor

Residual stress can adversely affect the mechanical, electronic, optical and magnetic properties of thin films. This work describes a simple stress measurement instrument based on the bending beam method together with a sensitive non-contact fibre optical displacement sensor. The fibre optical displacement sensor is interfaced to a computer and a Labview programme enables film stress to be determined from changes in the radius of curvature of the film-substrate system. The stress measurement instrument was tested for two different kinds of thin film, hard amorphous carbon nitride (CN) and soft copper (Cu) films on silicon substrates deposited by RF magnetron sputtering. Residual stress developed in 500 nm thick CN thin films deposited at substrate temperatures in the range 50-550 °C was examined and it was found that stress in CN films decreased from 0.83 to 0.44 GPa compressive with increase of substrate temperature. Residual stress was found to be tensile (121 MPa) for Cu films of thickness 1500 nm deposited at room temperature.     

Holographic vibration measurements of rough surfaces using a LCSLM

This paper describes measurements of a vibrating object with rough surface by the time-averaged method of holography using a newly designed optically addressed liquid crystal spatial light modulator with a resolution of 102 lp/mm and a diffraction efficiency of 16%. An object vibrating faster than several tens of Hz could be visualized. The pattern obtained by the method provides the locus of vibrating nodes. The advantage of this method is that a high contrast pattern of a vibrating object can be imaged in near-real-time, although the sensitivity of vibration is decreased.     

In situ calibration of a Michelson type, speckle-shearing interferometer: Wobbling mirror effect

In situ calibration of piezoelectric transducers in a phase stepping, Michelson type, speckle-shearing interferometer can be affected by mirror wobbling introduced by the transducers. When this happens, a modulation of the curves employed for calibration can be readily detected in imaging systems with large apertures. A calibration method that takes into account the modulation of these curves is, therefore, essential to insure the required regularity of the phase steps. A computer model of speckle-shearing interferometry is used to deal with piezoelectric non-linearities and mirror wobbling in the interferometer, and to show how the calibration curves are affected when both phenomena are present. Computer simulated and experimental results validate the calibration technique advanced here.     

Calibration and evaluation of optical systems for full-field strain measurement

The design and testing of a reference material for the calibration of optical systems for strain measurement is described, together with the design and testing of a standardized test material that allows the evaluation and assessment of fitness for purpose of the most sophisticated optical system for strain measurement. A classification system for the steps in the measurement process is also proposed and allows the development of a unified approach to diagnostic testing of components or sub-systems in an optical system for strain measurement based on any optical technique. The results described arise from a European study known as SPOTS whose objectives were to begin to fill the gap caused by a lack of standards.     

CARS methane spectra: Experiments and simulations for temperature diagnostic purposes

CARS laboratory experiments were done in the 2905–2925 cm⁻¹ range, in the vicinity of the ν₁ band of the methane molecule, for pressures ranging from 1 to 50 bar, and temperatures up to 1100 K. These experiments were carried out in order to retrieve the pressure evolution of the CH₄ spectrum, as well as to confirm its temperature dependance. After a brief recall on the theory used to compute pressure broadening coefficients and relaxation rates, we consider the ν₃ and ν₄ infrared bands of methane for benchmark calculations purposes. Next, we present recent experimental CARS spectra and calculated ones. Lastly, we discuss flame experiments as well as comparisons of temperature retrieval using N₂ and CH₄ as probe molecules.