最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

利用驻波实验研究混沌现象

利用驻波实验演示了混沌现象,并对其进行了理论分析和计算机仿真研究.仿真结果与实验结果都表明:当连接点接近驻波波节处时,振动系统处于混沌运动状态;而当连接点接近驻波波腹处时,系统处于稳定驻波运动状态.     

红外动态图像生成技术概念研究

红外动态图像生成技术的基本概念包括基本术语及其定义。为了描述红外动态图像生成技术的特性,通常采用如光源类型、光谱波段、阵列规模、空间分辨率、填充因子、时间常数、帧频、闪烁、温度范围、串扰、均匀性、发射率、辐射对比度、动态范围、温度分辨率、调制传递函数、几何畸变及最大温度和最大辐射强度等概念。介绍了描述红外动态图像生成系统性能的基本概念的定义。转换器的指标定义对于转换器的设计和性能指标的测试都有重要的意义。     

激光穿透焊的三维数值模拟

本文对激光穿透焊进行了三维数值模拟，除考虑焊接速度影响外，还研究了Ｍａｒａｎｇｏｎｉ对流对熔池流动与传热的影响。将三维数值模拟结果与相应的二维模拟结果进行了比较，结果表明，Ｍａｒａｎｇｏｎｉ对流对熔池的形成有很大的影响，因此不可忽略。本文还给出了估计激光穿透焊中蒸气孔尺寸与焊接热效率的方法。     

研究性学习在物理实验中的作用

分析了研究性学习在物理实验中的作用,提出实验中应培养学生的创新能力和科学思想.     

What is Erased in the Quantum Erasure?

In this paper, we re-examine a series of gedanken welcher Weg (WW) experiments introduced by Scully, Englert and Walther that contain the essential ideas underlying the quantum eraser. For this purpose we use the Bohm model which gives a sharp picture of the behaviour of the atoms involved in these experiments. This model supports the thesis that interference disappears in such WW experiments, even though the centre of mass wave function remains coherent throughout the experiment. It also shows exactly what it means to say ‘that the interference can be restored by manipulating the WW detectors long after the atoms have passed’. It does not support Wheeler’s notion that ‘the past is undefined and undefinable without the observation (in the present)’.     

三峡钢丝绳卷扬全平衡式垂直升船机机电耦合系统动力学仿真

建立三峡钢丝绳卷扬全平衡式垂直式升船机的双闭环调速电力拖动控制系统的模型和升船机各子结构的动力学模型，并通过刚性子结构法形成了整体动力学模型，运用MATLAB中的SIMULINK模块，将电力拖动控制系统与整体动力学模型耦合，采用Wilson-θ法求解瞬态响,对误载水深为＋20cm，承船厢低点位置上向上启动运动的正常工况进行了仿真分析。     

用时间-边界跟踪模型确定抗蚀剂显影后的轮廓分布

文章提出了时间一边界跟踪模型的定义,阐述了用该模型确定抗蚀剂显影后的轮廓分布的方法,并给出了模拟计算结果.     

The Extraction Method of Cutting Engagement in Ball-end Milling Simulation

Ball-end mill is widely used in workpiece processi ng with free-form surfaces. Such models that can predict processing character istics precisely are very necessary to the aim of cost reducing, quality improvi ng and productivity progressing, the cutting force prediction is the most import ant among these models. To explore the physical essence of metal cutting, model researchers commonly simplify the geometric conditions in cutting process, and a ssume that the geometric parameters that are needed to s...