低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

2-苯基苯并咪唑衍生物非线性光学性质的从头算研究

采用HF／6-31G^*方法优化分子构型，在此基础上用CPHF方法系统地研究了多种基团取代的2-苯基苯并咪唑衍生物的二阶非线性光学系数βvec，并对βvdc的影响因素进行了探讨，为进一步设计综合性能优良的有机非线性光学材料提供理论指导．     

Quantum-chemical calculation of a spillover model on a graphite support

The simplest quantum-chemical models of hydrogen spillover over a graphite-like surface as a proton or radical have been considered. The condensed planar C₂₄H₁₂ molecule was used as a model surface. Theab initio calculations of the interaction of hydrogen with the model surface were carried out by the restricted Hartree-Fock (HF) method in the STO-3G and 6-31 G^* basis sets. The radical hydrogen can not bind to such a surface, whereas the proton binds to it with an energy release of 186 kcal mol⁻¹. The activation energy of the transfer of the proton between two neighboring carbon atoms (10 kcal mol⁻¹) has been determined. The simplest model of the hydrogen migration as a proton over the model surface can be used for describing the spillover of hydrogen over the graphite surface. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 428–430, March, 1997.     

铁电极上硫脲及衍生物的缓蚀作用研究

用极化曲线方法测定了硫酸溶液中硫脲及其衍生物的浓度变化对铁腐蚀电化学行为的影响，获得了腐蚀电位下缓蚀剂对阴极和阳极过程的作用系数，用ＥＨＭＯ方法对硫脲及其衍生物的结构参数进行了量化计算，分析表明，缓蚀剂对阴极和阳极过程作用系数的大小与这些参量有密切关系。     

COCl2…NH3和COCl2…H2S体系的理论研究

在MP2水平上,用aug-cc-pVTZ基组对COC l2…NH3和COC l2…H2S体系进行几何优化和频率计算,同时使用Counterpoise技术进行BSSE校正,分别得到4个COC l2…NH3和2个COC l2…H2S无虚频的稳定结构:N(S)…C连接的构型(Ⅰ,Ⅱ,Ⅴ)和N(S)…C—lC直线型连接的构型(Ⅲ,Ⅳ,Ⅵ).第一类构型比第二类构型相互作用能更大、更稳定.在得到的6个稳定络合物中,络合物Ⅰ是最稳定的.     

Calculation of affinities of peptides for proteins

Several methodologies were employed to calculate the Gibbs standard free energy of binding for a collection of protein-ligand complexes, where the ligand is a peptide and the protein is representative for various protein families. Almost 40 protein-ligand complexes were employed for a continuum approach, which considers the protein and the peptide at the atomic level, but includes solvent as a polarizable continuum. Five protein-ligand complexes were employed for an all-atom approach that relies on a combination of the double decoupling method with thermodynamic integration and molecular dynamics. These affinities were also computed by means of the linear interaction energy method. Although it generally proved rather difficult to predict the absolute free energies correctly, for some protein families the experimental ranking order was correctly reproduced by the continuum and all-atom approach. Considerable attention has also been given to correctly analyze the affinities of charged peptides, where it is required to judge the effect of one or more ions that are being decoupled in an all-atom approach to preserve electroneutrality. The various methods are further judged upon their merits.     

CCl2自由基与H2O分子反应动力学研究

用213 nm激光光解CCl4产生CCl2自由基，用LP LIF技术测定了室温下基态CCl2自由基与H2O分子的反应速率常数为(5.45±0.95)×10－14 cm3•molecule－1•s－1.在G2MP2理论水平上计算了CCl2＋H2O反应的最低单重态势能面，揭示了插入与加成 消除两种反应机理，得到了三个可能的产物通道:HCl＋HClCO、HCl＋trans ClCOH以及HCl＋cis ClCOH.并用RRKM TST和传统过渡态理论计算了这三个通道的分支比及其温度效应.结果说明在低温下（273 K），插入机理的产物通道的分支比远大于加成 消除机理的产物通道， HCl＋HClCO是主要产物，分支比为77.4％，其次是HCl＋cis ClCOH，分支比为22.6％.而在高温下（3000 K），加成 消除机理的反应通道大于插入机理， HCl＋trans ClCOH分支比为82.3％.     

Mass transport in gas channels of electrochemical cells with a solid-oxide electrolyte: Allowing for the electrode reaction rates in numerical calculations

The concentration fields, Nusselt number distributions along the electrode, and ratios of concentrations of electrochemically active components at the entrance into and exit out of an electrochemical cell are determined by numerical integration of the convective-diffusion equation for a broad range of rate constants of electrode reactions, Peclet numbers, and geometrical parameters of channels. Three regions of parameter values are revealed. At low reaction rates (K _l < 0.5), mass transfer is completely determined by electrode kinetics; at high rates (K _l > 20), it is completely determined by the diffusion in the gas phase; and in the intermediate region of values of K _l it is necessary to allow for both the diffusion processes and the electrode reactions.Translated from Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 317–324.Original Russian Text Copyright © 2005 by Ezin, Somov.     

A Theoretical Study on the Conductivity of Carbon Doped BNNT

From the changes in energy band, density of state (DOS) and electronic structure calculated by the DFT/B3LYP method, the conductivity of carbon doped boron‐nitride nanotube (BNNT), which is formed by C‐C bond substituting B‐N bond, was discussed. The results indicate that the substitution will strengthen the conductivity of the tube, and its semi‐conductivity might be adjusted by controlling the substitution.