偏心因子数据的计算方法研究进展

从偏心因子(acentric factor)的定义出发，分析了ω数据的确定方法和获取数据的手段，评述了国内外ω计算方法的近期进展，包括对应态蒸气压关联方程法、对应态基团贡献法(CSGC)、图论法及拓扑法等，指出了各种方法的优缺点及最新的计算发展方向。     

用三个关系式与Mathematica软件求第二类自然数幂和公式

首先介绍三个第二类自然数幂和关系式并对其中的两式给出证明,接着利用这些关系式与数学软件M athem atica4.0,给出求解第二类自然数幂和公式的若干机械计算方法.     

水力机械内鲤鱼草鱼的压力损伤模拟试验

通过试验人工模拟水力机械内压力变化过程,测量压力时间变化,观察并解剖分析不同压力变化过程对鲤鱼和草鱼造成损伤的情况。试验发现,负压状态下的压力变化过程会对鱼的生存构成直接威胁,并得到了新型环保水力机械设计中应采用的压力时变导数极限值。     

关于非平行板电容器电容计算的讨论

用串联方法计算非平行板电容器的电容，简便地得到与其他方法相同的结果。     

燃煤烟气中As、Se、Pb的形态分布及S、Cl元素对其形态分布的影响

基于化学热力学平衡分析方法，计算分析了燃煤烟气中重金属As、Se、Pb的形态分布规律，研究了S、Cl等元素对As、Se、Pb的形态分布规律的影响。结果表明，氧化性气氛下，As以As₂O₅、As₄O₆、AsO等氧化物的形式存在；Se主要以SeO₂形式存在；Pb在1000 K以下主要是固态PbSO₄，1200 K以上为气态PbO。还原性气氛下，As在较低温度时为固态As₂S₂，900-1400 K以As₂、AsS、AsN气体共存，2000 K以上全部转化为气态AsO。Se在1100 K以下主要以气态H₂Se存在，1100 K开始生成SeS和Se₂气体，1800 K时主要是气态Se和少量气态SeO；Pb在中低温时主要是PbS，1800 K以上气态Pb为主要存在形态。S在还原性气氛下增大了AsS（g）、PbS（g）、SeS（g）的比例，氧化性气氛下对As、Se、Pb形态分布基本无影响；Cl无论在氧化还是还原气氛下对As、Se影响均较小，但对Pb的形态分布影响较大。     

用改进嵌入原子法计算Cu晶体的表面能

用改进嵌入原子法(MEAM)计算了Cu晶体12个晶面的表面能.结果表明，密排面(111)的表面能最小.其他晶面的表面能随其晶面与(111)晶面夹角的增加而增加，据此可以粗略地估计各晶面表面能的相对大小.给出的几何结构因子的确定方法及结果可以直接用于计算其他面心立方晶体的表面能及其他特性.在Cu,Ag等面心立方薄膜中出现(111)择优取向或织构的机理是表面能的最小化. 关键词： 改进嵌入原子法 铜 表面能 计算     

Study of local lattice relaxation of substitutional impurities in silicon and germanium

Local lattice relaxation of substitutional donors in silicon investigated using self‐consistent multiple scattering Xα (MSXα) method within the framework of the standard muffin‐tin potential approximation is extended to substitutional donors in germanium and substitutional acceptors in both silicon and germanium. Incorporating the effect of lattice relaxation surrounding the impurity makes the model suitable for both shallow and deep levels. Chemical trends of some aspects of impurity states, such as local lattice relaxation and charge transfer, of the impurities both in silicon and germanium are inferred. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

几种照度计算方法的比较及研究

针对一个典型建筑模型，本文通过对目前几种常用照度计算方法所得结果的分析与比较，指出了造成这种差异的原因及各种计算方法的使用范围及其局限性，并结合照片计算及建筑光环理论基础，提出了较为精确的照明计算方法。     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

Theoretical study of cyclization of 2′-hydroxychalcone

The isomerization mechanism of 2′(OH)chalcone (1) in flavanone (2) was studied. The calculations were performed with the semiempirical method AM1, using totally optimized molecular geometries. A 6-step mechanism including several equilibrium states was proposed. It was concluded that: (a) At the conformational equilibrium of 1 there could be 43.9% of s-cis conformer; (b) The acid dissociation of 1 trans-s-trans is considerable; (c) The E_E, ΔH_f and net charges show that the rotation of ring A of 1 and the formation of ring C of 2 occurs without greater impairments; (d) Although the keto structure is the most stable one, the enolate of 2 is present in the reaction medium; (e) The conversion of enol of 2 in the keto form would be the limiting step of the analyzed isomerization rate.