对微机原理教学中激发学生学习潜力的探索

微机原理与接口技术是各工科专业的专业基础课程，通过完善理论教学体系、加强实践教学环节以及现代化教学手段的应用，提高了微机原理与接口技术课程的教学质量和学生的综合素质。     

心电检测系统中单片机的抗干扰设计

指出了心电检测系统中单片机抗干扰的重要性,给出了该系统中单片机的硬件抗干扰和软件抗干扰措施,如电源抗干扰、滤波电路、数字滤波等技术,使用这些方法可以显著提高心电检测系统的抗干扰能力.     

单片机仿真实验的探讨与研究

本文介绍了传统的单片机实验方法和利用Proteus（http：／／www．labcenter.co．uk）软件进行单片机仿真实验。包括从元器件的选择、电路的连结、源程序的输入及调试、仿真结果的输出，并比较了各自的特点。     

微机控制双闭环直流数字调速系统

微机控制的晶闸管供电的双闭环直流数字调速系统是高精度复现输入信号的数字随动系统。其内环的速度控制、外环位置调节由计算机自动完成。     

一种基于扩频通信的煤矿通信系统及其应用

简述了煤矿系统的通信现状,介绍基于直接扩频通信理论的扩频通信芯片SC1128及其通信系统,该系统具有结构简单、误码率低、准时性和可根据实际通信的需要通过对软件中的参数进行重新设定等优点,特别适合煤矿通信,并且在试验的基础上证实了SC1128系统在煤矿通信中应用的可行性,指出可行的具体方案在主巷道使用漏泄电缆,而在其它巷道采用扩频通信.     

液态金属高性能冷却技术:发展历程与研究前沿

 "热障"问题已经成为阻碍高端电子芯片和光电器件向更高性能发展的重要挑战,发展高性能芯片冷却和热管理技术迫在眉睫。作为一大类新兴的热管理材料,液态金属在对流冷却、热界面材料、相变热控等领域均带来了观念和技术上的巨大革新,打破了传统冷却技术的性能极限,给大量面临"热障"难题的器件和装备的冷却提供了全新解决方案,有望在国防、航空航天、能源系统及民用电子设备等领域的冷却与热管理系统中发挥重要作用。本文回顾了液态金属先进冷却技术的发展历程,主要包括液态金属对流冷却技术、液态金属热界面材料、液态金属（低熔点金属）相变储能与热控技术、基于液态金属的复合冷却技术等;梳理了液态金属冷却技术中的关键科学与技术问题和面临的挑战。     

高温合金轴向超声振动钻削减摩机理

针对高温合金钻削困难、钻削过程中摩擦力大等问题,采用超声振动技术加工.首先,分析了超声振动减摩机理,构建了平均摩擦力与振动参数之间的关系,并得出了平均摩擦力与振幅之间的变化趋势.建立轴向超声振动钻削系统,利用该系统对高温合金进行钻削加工.结果表明:振动振幅对孔壁表面质量的影响符合超声振动钻削的减摩特性.利用优化后的振幅超声振动钻削,与普通钻削相比,切屑形态更加规整,孔壁表面粗糙度值更小,表面质量更好.     

Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Hyphenation of optimized microfluidic sample preparation with nano liquid chromatography for faster and greener alkaloid analysis

A glass liquid–liquid extraction (LLE) microchip with three parallel 3.5 cm long and 100 μm wide interconnecting channels was optimized in terms of more environmentally friendly (greener) solvents and extraction efficiency. In addition, the optimized chip was successfully hyphenated with nano-liquid chromatography with ultraviolet and mass spectrometric detection (nanoLC–UV–MS) for on-line analysis. In this system, sample pretreatment, separation and detection are integrated, which significantly shortens the analysis time, saves labor and drastically reduces solvent consumption. Strychnine was used as model analyte to determine the extraction efficiency of the optimized 3-phase chip. Influence of organic solvent, pH of feed phase, type of alkaloid, and flow rates were investigated. The results demonstrated that the 3-phase chip nanoLC–UV/MS hyphenation combines rapid (∼25 s) and efficient (extraction efficiency >90%) sample prep, with automated alkaloid analyses. The method was applied to real samples including Strychnos nux-vomica seeds, Cephaelis ipecacuanha roots, Atropa belladonna leaves, and Vinca minor leaves.     

Biparametric potentiometric analytical microsystem for nitrate and potassium monitoring in water recycling processes for manned space missions

The construction and evaluation of a Low Temperature Co-fired Ceramics (LTCC)-based continuous flow potentiometric microanalyzer prototype to simultaneously monitor the presence of two ions (potassium and nitrate) in samples from the water recycling process for future manned space missions is presented. The microsystem integrates microfluidics and the detection system in a single substrate and it is smaller than a credit card. The detection system is based on two ion-selective electrodes (ISEs), which are built using all-solid state nitrate and potassium polymeric membranes, and a screen-printed Ag/AgCl reference electrode. The obtained analytical features after the optimization of the microfluidic design and hydrodynamics are a linear range from 10 to 1000 mg L⁻¹ and from 1.9 to 155 mg L⁻¹ and a detection limit of 9.56 mg L⁻¹ and 0.81 mg L⁻¹ for nitrate and potassium ions respectively.