Rigid aromatic fractal polyamides

The preparation of rigid aromatic, highly branched polyamides is described. Owing to the method of preparation and the chosen ratio of difunctional to trifunctional monomers, these entities are highly porous and not dendrimeric in nature. They better conform with the fractal model and are therefore called fractal polyamides (FPs). The effects of variations in the polymerization procedure, in total monomer concentration, in the ratio of amine to carboxyl groups and in the duration of the polycondensation reaction are investigated. Some characterization was performed and the results are presented and briefly discussed.     

Changes in sol fraction during peroxide crosslinking of linear low-density polyethylenes with homogeneous distribution of short chain branching

FTIR measurements of sol fractions were carried out in order to assess side reactions during dicumyl peroxide (DCP) crosslinking of linear low density polyethylenes (LLDPEs) with homogeneous distribution of short chain branching. The changes of methyl and olefinic unsaturation concentration were measured as a function of degree of branching and DCP content. The changes of methyl and vinylidene concentration indicate that the scission probability has greater significance for the samples with initial branch content above 31 CH₃/1000 C and increases with increasing DCP concentration. The analysis of trans-vinylene concentration indicates that the probability of disproportionation also increases with increasing DCP content. The changes of methyl concentration in the sol fraction of the sample containing initially ca. 23 CH₃/1000 C with increasing DCP content could be interpreted using the dependence of crosslinking efficiency on branch content found previously for some range of branch concentration. © 1995 John Wiley & Sons, Inc.     

Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

Osmium catalyzed asymmetric dihydroxylation of methyl trans-cinnamate in ionic liquids, followed by supercritical CO2 product recovery

In this work, osmium-catalyzed asymmetric dihydroxylation (AD) of methyl trans-cinnamate was studied. Osmium and chiral ligand catalysts were immobilized in ionic liquid only, without any other reaction solvents, while the recovery of the product was performed by extraction with supercritical CO₂, and compared with results obtained by extractions with organic solvents such as hexane and diethyl ether. In supercritical CO₂ extraction experiments, optimal extraction pressure was found and ionic liquid chosen, so that the highest reaction yields coupled with lowest osmium content in the crude product can be achieved. Finally, recycle experiments of the same (ionic liquid + catalytic system) mixture were successfully conducted. Application of ionic liquids and supercritical CO₂ in osmium catalyzed AD allows for the isolation of the diol basically without contamination with osmium, in high yield and enantiomeric excess, and it makes possible the efficient reuse of ionic liquid solvent and the catalytic system.     

苯二甲酸衍生物及含氮配体构筑的两个镍配位聚合物的合成、晶体结构与热稳定性研究

使用硝酸镍分别与2个含取代基的苯基二羧酸3-硝基邻苯二甲酸（3-NPAH₂）和5-溴间苯二甲酸（H₂BIPA）以及2个刚性含氮配体4,4’-联吡啶（4,4’-bipy）、1,4’-二咪唑基二苯（L=1,4’-bis（imidazol-yl）benzene）在水热条件下合成了2个镍配位聚合物,即,[Ni（3-NPA）（4,4’-bipy）（H₂O）]_n（1）和[Ni（BIPA）（L）]_n（2）。表征了2个化合物的红外光谱、元素分析、热重、X-射线单晶衍射以及X-射线粉末衍射。化合物1是三斜晶系,P1空间群,含有[Ni（OCO）₄Ni]双核单元,该双核单元再通过4,4’-联吡啶连接而成一个二维单层结构。层与层之间通过羧酸氧原子与配位水分子之间产生氢键作用。化合物2是单斜晶系,P2₁/c空间群,含有[Ni₂（COO）₂]双核单元,该双核单元进一步通过BIPA^2-构成了一个双链结构,该双链再通过1,4’-二咪唑基二苯桥联配体连接形成了一个三维框架结构。此外,热重分析结果显示化合物2具有较高的热稳定性。     

The side chain effects on TPD-based copolymers: the linear chain leads to a higher jsc

Abstract

Alkyl substituents appended to polymers play the determining role on self-assembly and film-forming properties, and on device performance. In this work, we highlight the effects of the linear and branched flexible chains appended to the acceptor moiety (A) in D-A type copolymers. Two thieno[3,4-c]-pyrrole-4,6-dione (TPD) based copolymers PT1 and PT2 with different alkyl chains, were designed and synthesized. By comparison their UV-vis absorptions, HOMO/LUMO energy levels, as well as the characters in polymer solar cells, the influences of alkyl chains were investigated. Both copolymers showed molecular weights of 21?kDa and similar optical properties with a medium band gap of 1.93?eV, while PT2 with the branched chain exhibited a lower HOMO than that of PT1 (?5.43 vs???5.37?eV). In bulk heterojunction (BHJ) solar cells, PT1 with a linear chain presented a short circuit current (J_sc) of 6.76?mA cm^?2, open circuit voltage (V_oc) of 0.89?V and power conversion efficiency (PCE) of 2.92%. To the contrary, PT2 showed a J_sc of 3.53?mA cm^?2, V_oc of 0.99?V, delivering a relatively lower PCE of 2.05%. The result indicates that appending a linear alkyl chain to the TPD unit could sufficient enhance the J_sc value of the related polymer.     

Polyurethane Ionomers from Cycloaliphatic Diisocyanate and Polytetramethylene Glycol

Abstract

Segmented polyurethane (PU) ionomers were prepared from cycloaliphatic diisocyanate [methylene bis(4-cyclohexyl isocyanate) (H₁₂MDI) and isophoron diisocyanate (IPDI)] and polytetramethylene glycol (PTMG) by using an anionic-type chain extender, viz., dimethylol propionic acid (DMPA). The effect of ionic content and butanediol (BD) on the state of dispersion and physical properties of emulsion-cast film was determined using Autosizer, transmission electron microscopy (TEM), Instron, and Rheovibron. With increased incorporations of DMPA in PU, particle size of emulsion decreased asymptotically, tensile modulus and strength increased, and the glass transition temperature (T _g) moved toward the higher temperature. On the other hand, with increased incorporation of BD in PU, particle size of emulsion, tensile modulus, and strength of the emulsion cast film increased, and the major transition of soft segment moved toward higher temperature. With regard to the structural effect of the isocyanate, H₁₂MDI gave finer dispersion and better mechanical properties over IPDI.     

基于二噻吩并吡咯π桥的窄带隙非富勒烯受体材料在有机太阳能电池中的应用

以不同烷基取代的二噻吩并吡咯(DTP)为π桥,连接吲哒省并二噻吩(IDT)中间单元和氰基茚酮(IC)或二氟代氰基茚酮(2F-IC)末端基团,设计并合成了6个窄带隙的非富勒烯受体材料。 其中,IDTDTP-C₂C₂-H和IDTDTP-C₂C₂-F中的DTP单元以1-乙基丙基为侧链,IDTDTP-C₆C₆-H和IDTDTP-C₆C₆-F中的DTP单元以1-己基庚基为侧链,IDTDTP-C₁₂-H和IDTDTP-C₁₂-F中的DTP单元以十二烷基为侧链。 6个分子均具有较窄的光学带隙(1.37~1.44 eV)。 相比于以IC为末端基团的分子(IDTDTP-C₂C₂-H、IDTDTP-C₆C₆-H和IDTDTP-C₁₂-H),由于氟原子的拉电子效应,以2F-IC为末端基团的分子(IDTDTP-C₂C₂-F、IDTDTP-C₆C₆-F和IDTDTP-C₁₂-F)具有红移的吸收光谱,以及更低的最高分子占有轨道能级(HOMO)和最低分子空轨道(LUMO)能级。 以宽带隙聚合物聚[2,6-(4,8-双(5-(2-乙基己基))噻吩-2-基)-苯并[1,2-b:4,5-b']二噻吩-alt-5,5-(1',3'-二-2-噻吩)-5',7'-双(2-乙基己基)-苯并[1',2'-c:4',5'-c']二噻吩-4,8-二酮](PBDB-T)为给体材料,制备了有机太阳能电池器件。 PBDB-T:IDTDTP-C₆C₆-F共混薄膜具有较高且更平衡的空穴/电子迁移率,以及良好的形貌,基于PBDB-T:IDTDTP-C₆C₆-F的有机太阳能电池获得了6.94%的能量转换效率,开路电压为0.86 V,短路电流密度为13.56 mA/cm²,填充因子为59.5%。     

Donor–acceptor (donor) polymers with differently conjugated side groups at the acceptor units for photovoltaics

Four new donor–acceptor (donor) [D–A(D)], PBDT‐PTQ, PBDT‐PTTQ, PBDT‐TQ, and PBDT‐TTQ, bearing the same backbone of alternative benzodithiophene (BDT) and quinoxaline units but with phenylene thienyl, phenylene di‐thienyl, thienyl and di‐thienyl groups (other donors), respectively, at the acceptor quinoxaline units, were designed and synthesized to investigate the impacts of the conjugated side chains at the acceptor units on the photovoltaic properties of polymers. The power conversion efficiencies (PCEs) of the polymer solar cells (PSCs) based on PBDT‐TQ:[6,6]‐phenyl‐C‐70‐butyric acid methyl ester (PC70BM) and PBDT‐PTQ:PC70BM reach to 4.39 and 3.58%, respectively, which are 43 and 17% higher, respectively, than that of a reported alkylphenyl substituted polymer with the same main chain. However, the PCEs based on PBDT‐TTQ and PBDT‐PTTQ, in which an additional thiophene is added at a side chain of PBDT‐TQ and PBDT‐PTQ, respectively, decline. The mechanism how the conjugated side chains affect the performance of the PSCs is also discussed. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Oxime Side‐Chain Cross‐Links in an α‐Helical Coiled‐Coil Protein: Structure,Thermodynamics, and Folding‐Templated Synthesis of Bicyclic Species

Covalent side‐chain cross‐links are a versatile method to control peptide folding, particularly when α‐helical secondary structure is the target. Here, we examine the application of oxime bridges, formed by the chemoselective reaction between aminooxy and aldehyde side chains, for the stabilization of a helical peptide involved in a protein–protein complex. A series of sequence variants of the dimeric coiled coil GCN4‐p1 bearing oxime bridges at solvent‐exposed positions were prepared and biophysically characterized. Triggered unmasking of a side‐chain aldehyde in situ and subsequent cyclization proceed rapidly and cleanly at pH 7 in the folded protein complex. Comparison of folding thermodynamics among a series of different oxime bridges show that the cross links are consistently stabilizing to the coiled coil, with the extent of stabilization sensitive to the exact size and structure of the macrocycle. X‐ray crystallographic analysis of a coiled coil with the best cross link in place and a second structure of its linear precursor show how the bridge is accommodated into an α‐helix. Preparation of a bicyclic oligomer by simultaneous formation of two linkages in situ demonstrates the potential use of triggered oxime formation to both trap and stabilize a particular peptide folded conformation in the bound state.