Asymptotic nonlinear stability of a composite wave of two traveling waves to a chemotaxis model

In this paper, we investigate the asymptotic stability of a composite wave consisting of two traveling waves to a Keller–Segel chemotaxis model with logarithmic sensitivity and nonzero chemical diffusion. We show that the composite wave is asymptotically stable under general initial perturbation, which only be needed small in H¹‐norm. This improves previous results. Copyright © 2017 John Wiley & Sons, Ltd.     

Composite generalized Laguerre spectral method for nonlinear Fokker–Planck equations on the whole line

In this paper, we propose a composite Laguerre spectral method for the nonlinear Fokker–Planck equations modelling the relaxation of fermion and boson gases. A composite Laguerre spectral scheme is constructed. Its convergence is proved. Numerical results show the efficiency of this approach and coincide well with theoretical analysis. Some results on the Laguerre approximation and techniques used in this paper are also applicable to other nonlinear problems on the whole line. Copyright © 2016 John Wiley & Sons, Ltd.     

激光散斑干涉法测量金属复合引线热膨胀系数的实验研究

本文采用激光散斑干涉法测量微电子金属封装用金属复合引线的热膨胀系数。该方法有很高的测量精度和灵敏度,并对试件形状、尺寸和表面无特殊要求。同时利用光学方法全场测量的优点,使用已知热膨胀系数的金属材料作为标准试件,可减少温度场不均匀分布及微小变化对测试精度的影响,消除了测量光路几何参数导致的系统误差。在相对简单的实验设备下,得到较高精度金属复合引线的热膨胀系数值。该方法可广泛用于各种新材料的热膨胀系数的测定。     

A Cosserat shell model for interphases in elastic media

This study is concerned with the modeling of interphases in elastic media in general, and in composite materials in particular. The aim is to replace a boundary value problem consisting of a three-phase configuration, say that of fiber-interphase-matrix, by a simpler problem which involves the fiber and matrix only, plus certain matching conditions which simulate the interphase. The simplest of such known representations replaces a thin interphase by a “perfect contact interface” (a single surface) across which the displacements and tractions are assumed to be continuous. Another classical model replaces a thin and soft interphase by a “spring-type interface”, across which the tractions are continuous, but the displacement field undergoes a discontinuity. In the present paper, a Cosserat shell model of the interphase is derived which successfully models the original interphase in a unified manner, for the full range of its material parameters relative to those of the neighboring media. The model is derived in the setting of three-dimensional linear elasticity with small deformations and displacements. Comparisons with an existing exact solution of a coated fiber in an infinite matrix show that it performs extremely well even for moderately thick interphases.     

氮化钛微粉增强镍磷化学复合镀层的组织及其摩擦磨损性能研究

利用自蔓延高温合成法得到的氮化钛微粉制备了Ｎｉ－Ｐ－ＴｉＮ化学复合镀层，采用Ｘ射线衍射仪，扫描电子显微镜和电子探针分析了镀层的组织和结构，并在球－块摩擦磨损试验机上对镀层的摩擦学特性进行了研究，结果表明，ＴｉＮ微粉可使Ｎｉ－Ｐ化学镀层的组织明显细化，且能提高镀层的最佳时效硬化温度随着Ｎｉ－Ｐ－ＴｉＮ化学复合镀层中ＴｉＮ共析量的增摩擦系数逐渐降低并趋于稳定，耐磨性则存在的一个最佳ＴｉＮ含量；ＴｉＮ微     

Al_2O_3+PTFE(+PPS)复合材料滑动摩擦磨损的研究

作者采用冷压-烧结工艺研制了Al_2O_3+PTFE、PTFE+PPS和Al_2O_3+(PTFE+PPS)3类复合材料,并对这些材料的摩擦磨损行为及其磨损机理进行了研究。结果表明,适量Al_2O_3粒子的弥散可以明显提高复合材料的耐磨性,PTFE+PPS复合材料的耐磨性远比PTFE的好,摩擦系数几乎与PTFE的相同,是一种良好的减摩抗磨材料。复合材料的磨损过程主要受粘着、犁削和塑性流动机制的控制。     

橡胶基复合靶抗贯穿特性的近似分析方法

采用体积含量加权的方法确定了复合靶等效状态方程参数,采用纤维含量平方外推的方法确定了复合靶的等效强度。然后利用球腔膨胀和柱腔贯穿相结合的方法提出了一种分析计算钢球贯穿橡胶基复合靶的近似分析模型。计算方法简明、高效,而且对剩余速度和临界穿透速度等的计算结果与已有实验有良好的符合。     

Low Velocity Response Characteristics of Composite Plate with Embedded Shape Memory Alloy

I. INTRODUCTION Composite materials have been used extensively in aerospace and other industries owing to the factthat they have high speci?c modulus, high speci?c strength, and the capability to be designed andfabricated with greater ?exibility, and ha…     

一种复合材料梁架结构的强度可靠性分析

为解决分析复合材料框架式结构的强度可靠性问题 ,应用最小势能原理 ,设计推导了一种具有复杂剖面形状 ,考虑横向剪切 ,承受横向集中及分布载荷作用的层合梁单元。根据一具体水平梁架的实际情况 ,结合有限元处理程序中组装总体刚度矩阵的特点 ,较好地实现了层合梁之间的不完全简支连接。分析系统强度可靠性时 ,通过可调控的运行方式 ,有效解决了挑选失效模式与离散单元数目之间的关系 ,使系统可靠性的计算更合理     

MULTIPLE SCATTERING AND DYNAMIC STRESS ANALYSIS OF ELASTIC WAVES IN A FIBER—REINFORCED COMPOSITE WITH INTERFACES

Based on the theory of elastic dynamics, multiple scattering of elastic waves and dynamic stress concentrations in fiber-reinforced composite are studied. The analytical expressions of elastic waves in different regions are presented. The mode coefficients of elastic waves are determined in accordance with the continuous conditions of displacement and stress on the boundary of the multi-interfaces. By using the addition theorem of Hankel functions, the formula of scattered wave fields in different local coordinates are transformed into those in one local coordinate to determine the unknown coefficients and dynamic stress concentration factors (DSCFs). The influences of the distance between two inclusions, material properties and structural size on the DSCFs near the interfaces are analyzed. As examples, the numerical results of DSCFs near the interfaces for two kinds of fiber-reinforced composites are presented and discussed. The project supported by the National Natural Science Foundation of China (19972018)