四苯硼钠-甲苯胺蓝缔合物纳米微粒体系减色效应研究

在PH4.0醋酸-醋酸钠介质中，甲苯胺蓝在600nm处有一个吸收峰，随着四苯硼钠浓度的增大甲苯胺蓝在600nm处吸收峰降低，颜色减弱，这是由于甲苯胺蓝-四苯硼钠缔合物分子间存在较强的疏水作用及分子间作用力，聚集形成纳米微粒所致，甲苯胺蓝-四苯硼钠纳米微粒体系亦在600mm处有1个吸收峰，在400mm、470mm和580mm处产生3共振散射峰，其中400mm和580mm为甲苯胺蓝-四苯硼钠复合纳米微粒产生的特征共振散射峰，这也表明有纳米微粒存在，丙酮浓度的影响实验结果等表明，纳米微粒的形成是产生其减色效应的原因。     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

A study of the formation of silica-supported mixed magnesium-manganese spinel oxides from multicomponent gels

The effects of thermal treatment on composite materials prepared by the gelation of sols comprising large concentrations of metal oxide precursor salts have been investigated, in order to determine the compositional and thermal requirements for forming spinel magnesium manganates in such systems. The preparative technique has been found to give rise to derived gel materials in which the metal oxide phase, in the form of regular spherical particles, is dispersed throughout a continuous silica matrix. Silica-supported mixed magnesium and manganese spinel oxide phases were obtained for systems comprising at least 30 wt% metal nitrate after heating to temperatures between 700 and 850°C, but not without concomitant formation of Mn₂O₃ and modification of the silica network by magnesium.     

Sol Gel Processing of Low Permittivity,Fiber-Reinforced SiO2-Polyimide Substrates

Low permittivity ceramic substrates with a sandwich structure consisting of a porous, fiber-reinforced SiO₂ core and two thin polymer plates were fabricated by sol-gel processing, and polymer infiltration. The rheological behavior of an aqueous colloidal SiO₂ sol, containing short SiO₂ fibers was studied as a function of particle loading, fiber loading and gelation time. Short SiO₂ fibers were introduced to limit drying shrinkage and thus minimize substrate cracking during drying. After the psuedoplastic sol was tape cast and sintered at 1150°C for 2 h, a polyimide solution was infiltrated into the porous SiO₂ core. Permittivities ranging from 1.81 to 3.08 could be obtained by using 32–42% SiO₂, 5–50% polyimide and 63 to 8% porosity. The substrate strength was increased from 1.93 MPa to 3.83 MPa after polyimide infiltration.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

Photocatalytic activity and biodegradation of polyhydroxybutyrate films containing titanium dioxide

This study aims to evaluate the photocatalytic activity and biodegradation of polyhydroxybutyrate (PHB) films containing titanium dioxide (TiO₂). Nanosized TiO₂ photocatalysts were immobilized onto PHB film to overcome the difficulty of the recovery process. PHB is a suitable base material as it is naturally biodegradable and is produced from renewable resources. The photocatalytic degradation of organic compounds, photocatalytic sterilization activity and biodegradation rate in garden soil of PHB-TiO₂ composite films were investigated. After an hour under solar illumination, 96% of methylene blue solution was decolorized. The antibacterial activity against Escherichia coli (E. coli) using PHB-TiO₂ composite film exhibited enhanced photocatalytic sterilization activity over time. As for the ability to biodegrade, PHB-TiO₂ composite films placed on soil surface with no direct solar illumination showed slower degradation rate compared to those receiving direct solar illumination. Interestingly, the latter composite films showed faster degradation rates compared to pure PHB films indicating that the degradation is mainly due to photocatalytic activity. PHB-TiO₂ composite films buried in soil generally showed slower degradation rates compared to pure PHB films and were dependent on the soil microbial activity.     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

铂-金交替修饰的铂核纳米颗粒的制备与表征

通过吸附在铂纳米颗粒表面的氢交替还原氯金酸和氯铂酸,得到了复合型纳米颗粒Pt@Au/Pt,用UV-Vis光谱、TEM和XRD对其进行了表征.     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.