浅谈网络环境下印刷型文献的主体地位

章分析了印刷献在规模数量、学术价值、检索利用等方面的优势，阐述了印刷型献在网络环境下图书馆馆藏中的主体地位。     

复合变性玉米淀粉印花糊料的性能研究

对复合变性玉米淀粉印花糊料的增稠性，稳定性，印花特性及流变性等方面作了系统研究，并认为此糊料可以全部或部分代替海藻酸钠。     

Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

关于数码喷墨印花技术及其在服装上的应用

数码喷墨印花技术是当前染整、服装设计、图案设计等专业人员关心的最新印花技术,具有很好的发展前景.本文论述了数码喷墨印花技术发展过程、印花原理、方式及印花的特点,同时也说明了印花机的组成、特性及其在服装中的应用,这对推动服装业的发展将起到积极作用.     

电生成Fenton试剂处理工业印染废水的中试研究

对电生成Fenton试剂处理实际工业印染废水进行了中试型实验，并对其实际的处理费用进行了简单的计算．实验发现：本技术可以有效处理工业印染废水，CODCr率在80％以上，脱色率达到95％，处理费用在1．17元／m^3，具有很好的实际应用价值和市场前景。     

魔芋糊涂料印花应用研究

对魔芋的组成和葡甘露聚糖的分子物性进行了分析,测定了魔芋糊的成糊性、贮存稳定性和在涂料印花中的表面给色量,确定了魔芋粉的制糊条件和应用工艺,并在实际生产中探讨了魔芋糊应用于涂料印花的可能性.     

基于网络的报表打印程序的实现

我们完成了一个基于网络的报表打印程序．该程序可在网络环境下通过对远程数据库的访问生成报表，用户可使用本地打印机将报表打印出来．本文就如何实现Java应用程序框架结构、生成Java报表、进行多页打印、实现打印预览以及何时调用打印方法等问题进行了讨论．     

新型粘合剂、增稠剂的印染性能

通过对单体、乳化剂及工艺过程的选择,合成了丙烯酸酯类新型粘合剂PBAMM(Ⅰ)和增稠剂PMAEE(Ⅰ)及增稠剂PMAOE(Ⅱ)。所合成的粘合剂Ⅰ具有优良的配伍性能,且印花织物的牢度、色光、强度、手感等优良。增稠剂Ⅰ及Ⅱ既具有优良的增稠性能又有较强的耐电解质性,应用时少剂量即达要求,且能减少印花浆中的火油耗用量。尤其,当粘合剂Ⅰ与增稠剂Ⅰ或Ⅱ配套使用时,更具优越的加和应用性能。     

基于数值切割技术的鞋楦测量数据还原方法

根据鞋楦的测量与加工原理,提出一种新的测量数据还原技术.介绍了数字刀片的概念,从空间解析几何的角度出发,推导出铣刀旋转包络面的空间方程;根据仿形加工的思想提出应用数值切割技术进行数据还原的工作原理,并将其应用到鞋楦测量数据的还原工作中,得到鞋楦CAD软件中鞋楦离散模型,并给出特例的精度分析.     

太湖流域印染废水为主的城镇污水处理厂提标技术研究

采用调节—厌氧水解—A/O（PACT）—高效澄清池—过滤组合工艺处理综合印染废水。开展了中试试验研究和示范工程研究,研究结果表明：中试系统运行稳定,对COD、色度、氨氮、总氮、总磷平均去除率分别为93.2 %,93.9 %,90.2 %,70.8 %,96.3 %;厌氧COD平均去除率分别为48.1 %;色度平均去除率分别为75.7 %;A/O（PACT）工艺对氨氮和总氮的去除效果明显,混凝沉淀工艺则对总磷去除效果最理想;中试研究和示范工程出水水质稳定,各项指标均满足《太湖地区城镇污水处理厂及重点工业行业主要水污染物排放限值》（DB32/1072-2007）。