一类随机过程的多尺度建模

基于多尺度随机模型具有有效性和高度并行算法这一优势，提出如何用三阶树多尺度模型来表示1-D Reciprocal过程；并如何获得多尺度模型的参数。这就为具有Markov统计特性的信号或过程建立起一般的三阶树多尺度随机模型，为更有效的解决实际问题提供了理沦基础，同时，给出了一类定义在单位区间上的随机过程三阶树多尺度表示的仿真示例。     

极低硫钢的精炼脱硫动力学模型

通过对影响脱硫反应限制性环节的分析,将持续接触和瞬时接触两种反应模式综合考虑,建立了精炼脱硫动力学模型,并通过实验室"极低硫钢精炼脱硫"实验数据对模型进行验证.结果表明,本模型的预测结果与实验结果比较吻合.     

浅谈灾害管理系统构建中的几个问题

目前大多数灾害管理系统均以GIS系统建立工作平台,为决策部门提供可靠依据,这在很大程度上促进了一个地区减灾力的提高。但是,由于GIS系统在我国的开发利用还没有达到一个十分成熟的阶段,因此在此基础上所开发构建的各种灾害管理系统还不能完全满足灾害管理的需要。对此从灾害管理与经济建设的关系、灾害管理的计算机模拟以及人工神经网络与灾害管理系统的结合三方面进行了分析,将上述内容列入灾害管理系统中,使之更加完善。     

Comparison of XYZ Model Fitting Functions for 111Cd in In3La

The XYZ model describes the interaction between nuclear probes and an electric field gradient that fluctuates among three orthogonal directions. The model presents a means to calculate the perturbation function that represents spectra obtained using perturbed angular correlation spectroscopy. Three analytic approximations of the perturbation function have been developed previously, and they are evaluated in the present paper in the context of Cd jumping among In-lattice sites in In₃La.     

中国股票市场风险的实证分析研究

本文从实证角度说明了上证指数和深证成份指数存在着GARCH现象 ,并建立了沪、深两市股指波动率的IGARCH(1,1) M模型与EGARCH(1,1) M模型。将估计的IGARCH(1,1) M模型与EGARCH(1,1) M模型比较得出 ,对上证指数的波动率 ,IGARCH(1,1) M模型与EGARCH(1,1) M模型的模拟效果基本相同 ,而对深证成份指数的波动率 ,IGARCH M模型要略优于EGARCH M模型。同时还对两市的股指收益的波动率进行了预测分析     

断裂带作为油气散失通道的输导能力

通过断裂散失的油气量主要与断裂带的输导能力、实际进入断裂带的油气量、断裂通道的长度、散失时间和储层分流系数等参数有关。断裂带输导能力的主要因素是断裂带的宽度和储层渗透率。利用断裂散失模型计算了不同规模的断裂带作为油气散失通道的输导能力。计算结果表明 ,大型断裂带输导油气的能力远大于储层输导油气的能力。断裂活动期进入“通天”大断裂带的油气主要趋于散失 ;小断裂由于储层的分流作用 ,即使在活动期 ,它作为油气散失通道的作用也是有限的 ,其油气的散失量可以忽略不计。     

姬松茸高产栽培模式研究

为充分利用当地丰富的秸秆和牛粪资源，及早在北方地区开发生产姬松茸这一珍稀品种。从姬松茸的选育、栽培模式比较试验结果可看出，合理控制温湿度，改进覆土方式，加强病虫害预防是保证高产的有效措施。     

Cold compaction of ceramic powder: Computational analysis of the effect of pressing method and die shape

This paper deals with a computational analysis of the influence of the pressing method and part geometry on the final density distribution in the cold compaction process of ceramic alumina powders. The analysis is based on the explicit finite-element model proposed and validated in a previous study. The mechanical behavior of the processing material is described using a multisurface elastoplastic model, the modified Drucker-Prager/Cap model Published in Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 129–134, October 2007.     

线性电压扫描下1VIIS器件瞬态的简单模型

本文用准平衡模型分析讨论了线性电压扫描下MIS器件的I/V瞬态.文中除了给出一般的处理方法以外，还给出了几种不同电压扫描率下I/Y特性的计算结果，并与已往的模型作了比较.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.