Sample path analysis of level crossings for the workload process

We examine level crossings of sample paths of queueing processes and investigate the conditions under which the limiting empirical distribution for the workload process exists and is absolutely continuous. The connection between the density of the workload distribution and the rate of downcrossings is established as a sample path result that does not depend on any stochastic assumptions. As a corollary, we obtain the sample path version of the Takács formula connecting the time and customer stationary distributions in a queue. Defective limiting empirical distributions are considered and an expression for the mass at infinity is derived.This research has been supported in part by NSF Grants ECS-8811003 and DDM-8905638.     

Semi-classical limit of the bottom of spectrum of a Schrödinger operator on a path space over a compact Riemannian manifold

We determine the limit of the bottom of spectrum of Schrödinger operators with variable coefficients on Wiener spaces and path spaces over finite-dimensional compact Riemannian manifolds in the semi-classical limit. These are extensions of the results in [S. Aida, Semiclassical limit of the lowest eigenvalue of a Schrödinger operator on a Wiener space, J. Funct. Anal. 203 (2) (2003) 401-424]. The problem on path spaces over Riemannian manifolds is considered as a problem on Wiener spaces by using Ito's map. However the coefficient operator is not a bounded linear operator and the dependence on the path is not continuous in the uniform convergence topology if the Riemannian curvature tensor on the underling manifold is not equal to 0. The difficulties are solved by using unitary transformations of the Schrödinger operators by approximate ground state functions and estimates in the rough path analysis.     

优化路问题的代数方法—论动态规划（Ⅱ）

本文用同一思路求解多阶段有向图中三种优化路问题:最优路、N阶最优路及多指标Pareto优化路问题,它们都服从嘉量原理,都用同一个代数公式表达它们的嘉量,并可在同一种表格中进行计算,只是所在半域不同,以本文的方法讨论动态规划中一些离散决定型典型应用问题,其提法、建模思路以及求解过程都有可观的扩大与改善。     

路与路强乘积的最小直径定向

给定一个无向图G，将G的每条边{xy}．用弧xy或yx替代得到的有向图称为G的的定向图。使得G的所有定向图中直径最小的定向图称为G的最小直径定向。文章给出了两条路强乘积的最小直径定向。     

两类N参数σ－域族的刻划

证明了Ｎ参数右连续强增加σ－域族的（ＯＲＴ）性质等价于（ＳＴＲ）性质，对于具有（ＰＩＶ）性质的离散Ｎ参数σ－增域族，必存在单参数σ－增域族和关于它的停时族（Ｔ＿ｚ）ｚ∈Ｎ￣Ｎ，使     

树状管网技术经济计算分析

通过对目标函数(年费用折算值)W0在水力约束条件下最小值的分析计算,介绍了起点水压未知树状管网技术经济计算的方法,并求出了相应的经济水头损失hij和经济管径Dij的表达式。     

The Classification of Exponential Paths in Sp(2)

众所周知，四阶以上辛群中指数型道路的Ｍａｓｌｏｖ指标可以取任意整数．本文给出了二阶辛群中指数型道路的分类及其Ｍａｓｌｏｖ指标的取值范围，指出了与高阶情形的不同之处．     

基于层面信息的路径优化

根据分层物体快速成型（LOM）中零件逐层累积的特点，从缩短加工时间、提高制件效率方面着手阐述了路径优化的必要性，针对LOM机的运动机理和软件数据结构，给出了扫描路径优化的原理，将图论中的便宜算法用于LOM机的扫描路径优化。     

基于三维矩阵重构争论有向图的域间路由振荡检测算法

边界网关协议(Border G atew ay P rotoco l,BGP)是当前In ternet域间路由协议的事实标准,基于策略的路由选择过程使它不再是严格意义上的距离矢量协议,也不再具有距离矢量协议的收敛性.V aradhan指出,自治系统各自为政的策略配置方式会导致全局策略冲突,引起永久性的路由振荡.针对该问题,G riffin利用稳定路径问题(S tab le Path P rob lem,SPP)模型形式化的抽象出BGP协议行为,并以此为基础提出了一种分布式的策略冲突检测算法,尽管该算法完全避免了传统方法的缺陷,但仍然存在泄漏策略信息和对BGP协议改动太大以及浪费网络资源的问题.本文提出了一种基于安全多方计算的检测路由策略冲突的方法,用于在怀疑BGP路由发生振荡时,动态的检测系统中是否存在策略冲突.该方法采纳了G riffin的理论基础,同时由于巧妙的运用了安全多方计算协议,可以完全解决G riffin算法的问题,具有很好的实用性.     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.