低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

双相干点光源干涉的一般分析

讨论了双相干点光源的三维空间干涉场的一般数学描述,分析了3个不同截面处的干涉强度的空间分布情况,并给出了相干相长点的计算机模拟图样.该结果也适用于其他类型波的相干叠加场分布.     

Two-spin-majority cellular automaton as a model of 2D cluster and interface growth

A new probabilistic cellular automaton model is introduced to simulate cluster and interface growth in two dimensions. The dynamics of this model is an extension to higher dimensions of the compact directed percolation studied by Essam. Numerical results indicate that the two-dimensional cluster coarsening and growth can be described only approximately by the conventional cluster size scaling due to a crossover in the growth mode. The spreading of the initially flat interface follows a purely diffusional,t ^1/2, law.     

信息技术与地理课程整合的模式研究

随着科学技术的发展,加强现代信息技术的教学应用已成为各国教学改革的重要方向.为此应大力推进信息技术在地理教学过程中的应用,促进信息技术与地理学科课程的整合,逐步实现教学内容的呈现方式、学生的学习方式、教师的教学方式和师生互动方式的变革,充分发挥信息技术的优势,为学生的学习和发展提供丰富多彩的教育环境和有力的学习工具.     

金刚石窗口冷却Yb3+∶YAG DPSSL设计

针对高功率二极管重复率抽运的V型非稳腔Yb3+∶YAG激光头，提出了利用金刚石窗口冷却和直接水冷相结合的复合冷却设计.在YAG片的抽运面进行直接水冷，同时在激光提取面利用金刚石窗口冷却介质.金刚石优异的导热性能不仅能够有效地冷却激光介质，还能消除横向的温度梯度，解决了高功率激光器冷却和高功率抽运的矛盾.模拟结果表明对掺杂10 at %厚度为1.6 mm的Yb3+∶YAG片在抽运功率密度为20 kW/cm2，重复频率为10 Hz的条件下，要将最高温度控制在可接受的范围内（比如320 K），周围冷却水的对流换热系数约为4000 W/m2K.     

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3 - dimensional CAD and virtual technology used in apparel industry.     

袋装砂井施工工艺及质量控制

介绍了广肇高速公路1-B标段软基处理中的袋装砂井施工工艺与工程质量控制,并列出了部份监测结果.     

基于变芯径光纤的光学系统在光造型中的应用

光学系统采用变芯径光纤，可大幅度提高光的传输效率，增加光学子系统柔性。描述了光造型工作原理及其理论依据，在介绍所研制的光的成型系统光学子系统的基础上，阐述了紫外光源的选择与设计，及变芯径光纤的设计、传输、耦合与聚焦等技术。该套基于变芯径光纤的光学子系统成本低、体积小、效率高，巳成功应用于所研制的台式低成本快速成型系统中，为该系统的进一步推广奠定了技术基础。     

Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.