VPN 的构建方法

本文阐述了VPN的概念和采用隧道技术实现的原理,以及基于Internet的VPN构建方法和步骤.     

拓扑分子格的弱分离公理

本文是文［１］的继续，我们以Ｑ－远域为工具，首先引入和研究了拓扑分子格的ＳＴｉ分离公理（ｉ＝－１，０，１，２，３，４）。其次我们引入了Ｓ－不定序同态和Ｓ－同胚序同态等概念，给出了它们的若干特征性质。最后我们得到了各种ＳＴｉ分离公理是Ｓ－同胚序同态下保持不变的性质。     

On estimating pressure build-up in severely accelerated,shocked flow

A new approach to the calculation of the high pressures characterizing the flow field in front of a piston undergoing severe acceleration over the short term is presented. In contrast with previous approaches where the computational domain is altered but which stop short of transforming velocities, here the problem is solved in an accelerating non-Euclidean co-ordinate system where the piston is stationary. The method is applied to a study of the problem of premature sabot separation. Through use of Harten's second-order-accurate TVD scheme, flow simulations are performed for both 1D and 3D axisymmetric geometries. The simple 1D model gives pressure profiles surprisingly close to those of the more physical 3D model.     

三峡工程水电站压力管道和蜗壳技术结构型式的选择及论证

The developing process of simulation technology is discussed in view of its development, maturation and further development.The applications of simulation technology in the fields of national economy are introduced. Finally, the level and status quo of simulation technology home and overseas are analyzed, and its future trend in the new century is presented.     

关于教育技术专业课程建设的若干思考

在分析了教育技术专业现在面临的许多外界环境变化的同时 ,从市场、商品经济学的有关角度 ,提出了关于教育技术专业本科课程设置的几点想法 ,并在实践的基础上给出了一些具体的做法     

技术组织的进化

通过对技术发展过程的分析，揭示了技术组织形式必然要进化的原因。介绍了技术组织的历史发展过程，指出随着生产的发展、技术的进步，技术组织会不断地进化。     

乙酸乙酯分离竹子中木质素制浆造纸研究

用乙酸乙酯浸提竹子制取纸浆，并用造纸行业相关国家标准对纸浆进行了分析。探讨了乙酸乙酯浓度、反应温度、反应时间、原料与溶剂的固液比对纸浆质量的影响。实验结果表明：当乙酸乙酯浓度为60％、反应温度为180℃、反应时间2h、原料-溶剂比为1：6时，制得的纸浆中残余木素含量相对较低、纸浆得率较高。     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

电子测配色和分色制版技术在纺织印染工业中的应用

在纺织印染、染料等学科中，颜色的度量有着相当重要的作用和广泛的用途。纺织是最古老的行业之一，新的纺织技术不同于传统纺织技术，电脑测色与配色、电子分色制版等新技术又赋予了它新的内容。同时，古老的纺织业又为最现代的纺织技术提供了广阔的舞台。     

国内局部增氧助燃技术研究及应用进展

局部增氧助燃技术能用于各种燃料和大多数工业炉窑。介绍了局部增氧助燃技术的基本概念；然后通过国内有关典型应用实例说明：局部增氧助燃技术用于节能和环保时具有显著的综合效益；最后通过实测数据证明：用富氧助燃时，能明显降低燃料的燃点和燃尽温度，并大大缩短燃尽时间。