Dusty effects on pulsating viscous flow of two immiscible fluids between two parallel plates

The flow of two immiscible incompressible dusty viscous fluids between two parallel plates generated by a pulsating pressure gradient is investigated. Velocity fields for the fluid-particle system along with the expressions for the skin friction drag at the plates are obtained and studied graphically. It is found that there is an immediate response to pressure fluctuations in the first stream at low frequency range 0<σ≤4 being maximum at σ=4. On the contrary, the second stream is more responsive to fluctuations at relatively higher frequencies. The maximum response in this case is shifted to σ=16.     

Improvement of amorphous silicon n-i-p solar cells by incorporating double-layer hydrogenated nanocrystalline silicon structure

We develop a double-layer p-type hydrogenated nanocrystalline silicon (p-nc-Si:H) structure consisting of a low hydrogen diluted i/p buffer layer and a high hydrogen diluted p-layer to improve the hydrogenated amorphous silicon (a-Si:H) n-i-p solar cells. The electrical, optical and structural properties of p-nc-Si:H films with different hydrogen dilution ratio (R_H) are investigated. High conductivity, low activation energy and wide band gap are achieved for the thin films. Raman spectroscopy and high-resolution transmission electron microscopy (HRTEM) analyses indicate that the thin films contain nanocrystallites with grain size around 3-5 nm embedded in the amorphous silicon matrix. By inserting a p-nc-Si:H buffer layer at the i/p interface, the overall performance of the solar cell is improved significantly compared to the bufferless cell. The improvement is correlated with the reduction of the density of defect states at the i/p interface.     

LiF插层对有机发光二极管磁场效应的调控

制备了有LiF插层的有机发光二极管,以八羟基喹啉铝（Alq₃）作为电子传输层,N, N′-二苯基-N, N′-二(1-萘基)-1,1′-联苯-4,4′-二胺（NPB）作为空穴传输层.通过改变Alq₃与NPB间LiF插层的厚度,研究了不同温度下器件的光电特性及电致发光的磁场效应.测量结果表明:LiF插层可以影响器件内部载流子的输运和激发态的形成.较厚的插层阻碍了空穴的传输,使器件的电流效率变低.但实验中发现, 关键词： LiF插层结构 磁场效应 三重态激子     

不同盖层对InAs/GaAs量子点结构和光学性质的影响

利用金属有机化合物气相沉积设备生长了不同盖层结构的InAs/GaAs量子点,采用原子力显微镜和光致发光光谱仪对量子点的结构和光学性质进行了研究.量子点层之间的盖层由一个低温层和一个高温层组成.对不同材料结构的低温盖层的对比研究表明,In组分渐变的InGaAs低温盖层有利于改善量子点均匀性、减少结合岛数目、提高光致发光强度;当组分渐变InGaAs低温盖层厚度由6.8 nm增加到12 nm,发光波长从1256.0 nm红移到1314.4 nm.另外,还对不同材料结构的高温盖层进行了对比分析,发现高温盖层采用In组分渐变的InGaAs材料有利于光致发光谱强度的提高. 关键词： 半导体量子点 盖层 组分渐变     

基于微结构参数建模的多孔硅绝热层热导率研究

多孔硅由于具有较低的热导率,因而可以将其作为半导体器件中的绝热层.与其他从边界散射等复杂微观热传导机制出发建模研究多孔硅的热导率不同,将多孔硅热导率影响机制更表观地归结到孔洞的存在和分布等结构因素上,把整个多孔硅视为由硅连续材料介质和孔洞连续介质通过串联和并联组合成的复合微结构,给予其低热导率一个更为易于理解和简化的解释.进一步把孔隙率对等效热导率的影响分解为两个不同的部分,即纵向部分和横向部分,半定量地给出不同的孔洞结构和分布下孔隙率与等效热导率的关系.与实验数据进行对比后验证了模型的有效性.继而从结构的角度说明了多孔硅热导率较低的原因.     

石英衬底上Au缓冲层对ZnO薄膜微结构的影响

采用单源化学气相沉积(SSCVD)法,在石英衬底上以Au为缓冲层,Zn4(OH)2(O2CCH3)6.2H2O为固相源制备ZnO薄膜。SEM和XRD测试ZnO薄膜的微结构,结果表明:相对于SiO2衬底上生长的ZnO薄膜,Au/SiO2衬底上生长的ZnO薄膜具有较好的结晶质量和表面平整度;对制备ZnO薄膜的衬底温度进行了工艺优化,结果表明:500℃时制备的ZnO薄膜颗粒大小均匀,结晶质量较好;通过荧光光谱仪对Au/SiO2衬底上的ZnO薄膜进行光致发光(PL)谱测试,ZnO薄膜在400nm出现紫光发射峰,而没有出现与缺陷相关的深能级发射峰,表明ZnO薄膜具有较好的结晶质量。     

膜系光谱系数对膜层参数的一阶和二阶偏导数的计算模型

为了寻找一种膜系深入分析与设计的有力辅助计算工具,从光学薄膜光谱系数的矩阵计算理论出发,基于对矩阵求迹运算的巧妙运用,从数学上建立了准确计算膜系光谱系数关于膜层几何厚度、实际折射率和消光系数等膜层参数的一阶和二阶偏导数的解析模型。这一偏导数计算模型物理上与矩阵理论具有一致的通用性和普适性,适用于任何各向同性的均匀膜系统。在数学上也严格成立,数值编程计算不存在差分近似,精度达到了计算机浮点运算的极限精度。而且算法运算费时少,计算速度快,取得了高度准确性和便于实时化的双重优越性能,非常有利于应用于膜系设计领域来提高膜层数较大时的设计速度和效率。同时,这一模型能非常便捷和准确地给出膜系许多实用的导数信息,对膜系分析、测量和膜厚监控等领域中的相关应用具有重要的参考意义。     

Evolution of the ring-like vortices and spike structure in transitional boundary layers

At the late stage of transitional boundary layers, the nonlinear evolution of the ring-like vortices and spike structures and their effects on the surrounding flow were studied by means of direct numerical simulation with high order accuracy. A spatial transition of the flat-plate boundary layers in the compressible flow was conducted. Detailed numerical results with high resolution clearly represented the typical vortex structures, such as ring-like vortices and so on, and induced ejection and sweep events...     

Insertion loss of sound waves through composite acoustic window materials

This study evaluated the insertion loss of sound waves through composite acoustic window materials for sonar dome applications, and examined the influence of dome shape on the sonar performance. The insertion loss of sound waves through acoustic window materials was experimentally measured as a function of frequency at normal incidence. The insertion loss was also theoretically estimated with three- and four-medium layer models. The theoretical estimation of insertion loss showed good agreement with the experimental measurements. The insertion loss was also measured as a function of angle of incidence. The characteristics of longitudinal and converted shear waves were observed at various angles of incidence. This study will be useful to select acoustic window materials with the appropriate acoustic characteristics for practical sonar dome applications.     

Photocurrent analysis of organic photovoltaic cells based on CuPc/C60 with Alq3 as a buffer layer

The performance of an organic photovoltaic(OPV) cell based on copper phthalocyanine CuPc/C60 with a tris(8-hydroxyquinolinato) aluminum(Alq3) buffer layer has been investigated.It was found that the power conversion efficiency of the device was 1.51% under illumination with an intensity of 100 mW/cm2,which was limited by a squareroot dependence of the photocurrent on voltage.The photocurrent-optical power density characteristics showed that the OPV cell had a significant space-charge limited photocurrent with a varied saturation voltage and a three quarters power dependence on optical power density.Also,the absorption spectrum was measured by a spectrophotometer,and the results showed that the additional Alq3 layer has a minor effect on photocurrent generation.