药物分析中薄层色谱的方法认证

在药物分析中,针对所要求的性能参数,对一个薄层色谱程序的各个环节必须进行的认证方法和认可标准进行了讨论。建议当提出结果报告时,应附上关于对方法的认证参数和认证方法的说明。     

Effect of Substrates on the Addition Polymerization of 1,4-Benzenedithiol to 1,4-Diethynylbenzene in the Solid State and the Electronic Properties of the Resulting Polymer

The effect of substrates on the addition polymerization of 1,4-benzenedithiol (BDT) to 1,4-diethynylbenzene (DEB) in the solid state and the electronic properties of the polymers obtained were studied. As the substrate polymer sheets, for instance, PET (poly (ethylene terephthalate)) sheet, ON-6 (oriented nylon-6) sheet and so on having surface free energies Γ_s from 27.4 to 55.0 erg/cm² were used. At the monomer sublimation temperature of 60°C, the S wt% (sulfur content) and the cis content of the polymers were not affected by the kind of polymer sheets. However, the molecular weights, M¯_n of the polymers polymerized on the polymer sheets were 13,000–30,000, and the values were several times higher than the molecular weight of the polymers polymerized on glass plate. On the other hand, at the sublimation temperature of 82°C, the cis content of the polymers apparently increased with decreasing d-value of the polymer sheets. On X-ray diffraction patterns of monomer mixtures sublimed onto polymer sheets, the diffraction intensities and the diffraction peak positions were concerned with the d-value of the polymer sheets. Using polymer sheets, the diffraction peak intensities of the monomer mixture at 7.73 and 7.58 Å decreased compared with those on glass plate. In contrast, the peak at 3.65 Å, which is a negligibly small peak on glass plate, obviously increased. However, as the d-value of the polymer sheets (PET 3.45 Å; OPP (oriented polypropylene) 5.2 Å) increased, the diffraction peak intensities at 7.73 Å and 7.58 Å gradually increased and the diffraction peak intensity at 3.65 Å gradually decreased. The parallel electrical conductivities (σ_||) toward the layered structural polymer on PET, ON-6 and glass plate under air atmosphere were 10⁻⁷, 10⁻⁹ and 10⁻¹¹ S/cm, respectively. Under a reduced pressure of 10⁻³ mmHg, the σ_|| values of each polymer lowered by one or two orders of magnitude. On the other hand, the σ_|| values of the nonlayered structural polymers under air atmosphere were about 10⁻¹¹–10⁻¹² S/cm and were independent of the substrates. Even under a reduced pressure of 10⁻³ mmHg, the σ_|| values hardly changed and remained at 10⁻¹¹–10⁻¹² S/cm. The vertical electrical conductivities (σ_⟂) of the layered structural polymers on conductive PET sheet coated by indium tin oxide or NESA glass plates were independent of the substrates and were 10⁻¹⁴ S/cm under air atmosphere. The σ_⟂ values of the nonlayered structural polymers also exhibited the same values. The reversible change of the amount of the layered structural polymer on PET sheet was also caused by irradiation of the photo-light which is the effective wavelength for the phase transition of the polymers mounted on glass plate. The σ_|| value of the layered structural polymer on ON-6 sheet reversibly changed with the amount of the layer structure controlled by the photo-light, that is, the σ_|| increased up to about one order of magnitude by the photo-light at 545.6 nm. On the other hand, the _|| decreased to about one order of magnitude by the photo-light at 539.6 nm. Anisotropic conductivity with respect to σ_|| and σ_⟂, and oxygen doping mechanisms were discussed in relation to the layer structure of polymers. © 1997 John Wiley & Sons, Ltd.     

About the Dominance of Mesopores in Physisorption in Amorphous Materials

Amorphous, porous materials represent by far the largest proportion of natural and men-made materials. Their pore networks consists of a wide range of pore sizes, including meso- and macropores. Within such a pore network, material moisture plays a crucial role in almost all transport processes. In the hygroscopic range, the pores are partially saturated and liquid water is only located at the pore fringe due to physisorption. Therefore, material parameters such as porosity or median pore diameter are inadequate to predict material moisture and moisture transport. To quantify the spatial distribution of material moisture, Hillerborg’s adsorption theory is used to predict the water layer thickness for different pore geometries. This is done for all pore sizes, including those in the lower nanometre range. Based on this approach, it is shown that the material moisture is almost completely located in mesopores, although the pore network is highly dominated by macropores. Thus, mesopores are mainly responsible for the moisture storage capacity, while macropores determine the moisture transport capacity, of an amorphous material. Finally, an electrical analogical circuit is used as a model to predict the diffusion coefficient based on the pore-size distribution, including physisorption.     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

吸附相反应技术制备纳米TiO2/SiO2复合材料

以SiO₂表面形成的吸附层为反应器,在载体表面制备了纳米TiO₂粒子.溶剂置换实验直接给出了吸附层的存在以及吸附层作为纳米反应器的实验证据,TEM,XRD和电子能谱分析表明,载体表面形成一层比较均匀的纳米粒子.初步探讨了温度和反应物浓度对产物分布的影响,分析了各种现象产生的可能成因.     

New Type of an Adsorption Layer of Organic Molecules with a Cage Structure Condensed at the Electrode/Solution Interface: The Adsorption of Cubane Derivatives on a Mercury Electrode

A synthesis and a study by method of measuring the differential capacitance on a stationary mercury drop of the adsorption of a number of cubane derivatives in a surface-inactive electrolyte are performed. It is established that the compounds studied exhibit a high surface activity. For bromine derivatives of cubane (4-bromomethoxycarbonylcubane, 4-bromohydroxymethylcubane) the formation of two-dimensional adsorption layers is discovered. Values of adsorption parameters for these compounds are evaluated with use made of the Frumkin isotherm.     

Scratch and Abrasion Resistant Coatings on Plastic Lenses—State of the Art,Current Developments and Perspectives

The manufacturing of ophthalmic lenses is one of the most important markets worldwide and, therefore, strong research efforts are undertaken to continuously improve the quality of the products, either silicate glasses or organic polymer lenses. Hybrid sol-gel based materials play a major role in this highly competitive field and have contributed significantly to the commercial success of the organic base materials. Recent developments concern fast curing and patternable coatings that might soon become part of this business. The compatibility of hybrid sol-gel materials either with organic dyes or with inorganic vacuum borne coatings offers further possibilities to develop highly sophisticated lenses meeting not only customer needs like perfect corrective function, high optical quality and protection, but also high durability as well as cosmetic and decorative aspects. An overview and a few recent developments are outlined below.     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

Modulation of Foreign Body Reaction against PDMS Implant by Grafting Topographically Different Poly(acrylic acid) Micropatterns

The surface of poly(dimethylsiloxane) (PDMS) is grafted with poly(acrylic acid) (PAA) layers via surface‐initiated photopolymerization to suppress the capsular contracture resulting from a foreign body reaction. Owing to the nature of photo‐induced polymerization, various PAA micropatterns can be fabricated using photolithography. Hole and stripe micropatterns ≈100‐µm wide and 3‐µm thick are grafted onto the PDMS surface without delamination. The incorporation of PAA micropatterns provides not only chemical cues by hydrophilic PAA microdomains but also topographical cues by hole or stripe micropatterns. In vitro studies reveal that a PAA‐grafted PDMS surface has a lower proliferation of both macrophages (Raw 264.7) and fibroblasts (NIH 3T3) regardless of the pattern presence. However, PDMS with PAA micropatterns, especially stripe micropatterns, minimizes the aggregation of fibroblasts and their subsequent differentiation into myofibroblasts. An in vivo study also shows that PDMS samples with stripe micropatterns polarized macrophages into anti‐inflammatory M2 macrophages and most effectively inhibits capsular contracture, which is demonstrated by investigation of inflammation score, transforming‐growth‐factor‐β expression, number of macrophages, and myofibroblasts as well as the collagen density and capsule thickness.