高光学质量,高平均功率非稳腔Nd：YAG激光器

在分析含热透镜的非稳腔固体激光器普遍特性的基础上，分别定义了几何放大率和输出曲率半径的热敏感度，结合腔镜失调敏感度而成为设计该类谐振腔的重要依据，据此，进一步改善和发展的新型的棒成像非稳腔。     

折射率介质在制栅和云纹干涉法中的应用

利用光在折射率介质中传播可以减小光波波长的性质，提出用折射率介质法制作高频全息光栅技术，使光栅频率突破理论极限２／λ；并将折射率介质应用于云纹干涉法中，当试件栅频率为６００１／ｍｍ时，虚栅频率可达到６０００１／ｍｍ，利用其±５级衍射光进行干涉，测量灵敏度由０．８３μｍ提高到０．１６μｍ。     

碳纳米管/聚二甲基硅氧烷复合薄膜的制备及力敏特性研究

针对传感器的敏感单元发展需求,提出了一种碳纳米管复合材料.该材料是以碳纳米管作为填充粒子,结合聚二甲基硅氧烷(PDMS)有机基体,采用超声共混方法制备的一种新型传感器敏感元件.详细分析研究了复合材料的制备工艺参数,以及在不同工艺参数下该复合材料的力敏特性.扫描电镜测试表明碳纳米管在PDMS中分散均匀且镶嵌良好.通过对不同体积分数的碳纳米管与PDMS复合材料进行电学性能测试,研究薄膜的"力-电阻"和"力-电容"耦合性能,测试了薄膜结构的力敏效应.计算得到复合薄膜材料的压阻灵敏度因子达到40,压电容灵敏度因子达到70.实验研究表明,通过改变碳纳米管与PDMS的比例,可以很好地调节其电子输运特性以及电阻和电容的应力敏感特性,可以为该类型的力敏材料在不同的力敏传感技术领域提供新的研究思路.     

Image quality assessment in multiband DCT domain based on SSIM

The performance of image quality assessment method based on SSIM (structural similarity) is better than the PSNR (peak signal to noise ratio), but the assessment effects of SSIM is poor for seriously blurred image, therefore, the model that combined HVS (human visual sensitivity) and SSIM was established. The basic idea is based on the human eye's sensitivity to different frequency distortion image, the image is two-dimensional discrete cosine transform frequency component into low, mid, high-frequency component, to obtain the frequency component of light, contrast and structural information, using Pearson coefficient for weight and sum processing to the sub-image according to frequency bands of different sensitive degree, finally, get the sharpness of the image. Through nonlinear regression analysis of objective assessment and DMOS, experiments showed that this method was closer to human perception than SSIM and GSSIM for serious blurred distortion image. At the same time, compared to conventional algorithm MAE (mean absolute error), MSE (mean square error) and PSNR, this model was more consistent with human visual characteristics.     

Stochastic sensitivity analysis of periodic attractors in non-autonomous nonlinear dynamical systems based on stroboscopic map

To apply stochastic sensitivity function method, which can estimate the probabilistic distribution of stochastic attractors, to non-autonomous dynamical systems, a 1/N$1/N$-period stroboscopic map for a periodic motion is constructed in order to discretize the continuous cycle into a discrete one. In this way, the sensitivity analysis of a cycle for discrete map can be utilized and a numerical algorithm for the stochastic sensitivity analysis of periodic solutions of non-autonomous nonlinear dynamical systems under stochastic disturbances is devised. An external excited Duffing oscillator and a parametric excited laser system are studied as examples to show the validity of the proposed method.     

燃料敏感性对内燃机部分预混燃烧(PPC)光谱特性的影响研究

在一台光学发动机上,利用火焰高速成像技术和自发光光谱分析法,研究了燃料敏感性(S)为0和6时对发动机缸内火焰发展和燃烧发光光谱的影响。试验过程中,通过改变喷油时刻(SOI=-25,-15和-5°CA ATDC)使燃烧模式从部分预混燃烧过渡到传统柴油燃烧模式。通过使用正庚烷、异辛烷、乙醇混合燃料来改变燃料敏感性。结果表明,在PPC模式下(-25°CA ATDC),火焰发展过程是从近壁面区域开始着火,而后向燃烧室中心发展,即存在类似火焰传播过程,同时在燃烧室下部未燃区域也形成新的着火自燃点。敏感性对燃烧相位影响较大,对缸内燃烧火焰发展历程影响较小;高敏感性燃料OH和CH带状光谱出现的时刻推迟,表明高敏感性燃料高温反应过程推迟,且光谱强度更低,表明碳烟辐射强度减弱。在PPC到CDC之间的过渡区域(-15°CA ATDC),燃烧火焰发光更亮,燃烧反应速率比-25°CA ATDC时刻的反应速率更快。高、低敏感性燃料对缸压放热率的影响规律与-25°CA ATDC相近,此时的燃烧反应更剧烈,放热率更高,碳烟出现时刻更早。该喷油时刻下的光谱强度高于PPC模式下的光谱强度,说明此时的CO氧化反应与碳烟辐...     

基于布里渊动态光栅的高灵敏度静压力传感器设计

设计了一种新型边孔型保偏光子晶体光纤,在包层中对称地引入两个大空气孔,纤芯区域与大空气孔之间仅有一层小空气孔。由平面应变假设将该模型进行二维简化,利用有限元法对该光纤的二维模型进行数值分析,通过计算不同温度和静压力下的双折射频移以研究其温度和静压力传感特性。研究表明,在较大静压力和温度范围内,该保偏光子晶体光纤无需掺杂任何应力材料就可以实现?2.1353 GHz/MPa的静压力灵敏度且具有温度不敏感性,其温度灵敏度仅为+0.1542 MHz/℃。另外,还对该光子晶体光纤的光学特性进行了分析,其满足单模传输条件、具有较小的限制性损耗和较大的有效模场面积。由于具有体积小、与其他光纤兼容度强、静压力灵敏度高、温度不敏感的特性,其在温度变化不定、静压力改变区间较大的环境中静压力精确测量的优势比较明显,较好的光学特性使其在油井、土木的监测应用等方面有着重要参考价值。     

一种高灵敏度的桥型声表面波应变传感器

为了提高声表面波传感器应变灵敏度,该文提出了一种桥型声表面波应变传感器.首先根据受压弯曲构件中应变分布特点设计了桥型声表面波应变传感器,并建立有限元模型,结合微扰法分析了桥型结构几何参数与声表面波应变传感器灵敏度的关系.根据分析结果确定桥型声表面波应变传感器几何结构参数,并与传统声表面波应变传感器的应变灵敏度进行了对比...     

Correction for Shift-variant Characteristics of Single Photon Emission Computed Tomography Acquisition System Using Sensitivity Functions

The single photon emission computed tomography (SPECT) imaging system has shift-variant characteristics due to non-uniform attenuation of gamma-ray, collimator design, scattered photons, etc. In order to provide quantitatively accurate SPECT images, these characteristics should be compensated in the reconstruction. This paper presents a new method to correct the shift-variant characteristics, which is based on a continuous-discrete mapping model and filtered backprojection (FBP) method, in which the projection data are assumed to be acquired by narrow ray sum beams in the FBP method and the assumed data set is expressed as a linear combination of the actual projection data. Narrow ray sum beams are approximated by a weighted sum of the original sensitivity functions. Thus, at the reconstruction the projection data are first modified using an approximation and the FBP method is then applied to the corrected projection data and a SPECT image is reconstructed. We further propose a technique that requires the inversion of smaller matrices than the conventional algebraic method; the amount of calculation and memory space become smaller and the stability of the calculation is greatly improved as well. The results of the numerical simulations are also demonstrated.     

Conditioning convex and nonconvex problems

Two ways of defining a well-conditioned minimization problem are introduced and related, with emphasis on the quantitative aspects. These concepts are used to study the behavior of the solution sets of minimization problems for functions with connected sublevel sets, generalizing results of Attouch-Wets in the convex case. Applications to continuity properties of subdifferentials and to projection mappings are pointed out.We are grateful to M. Valadier for pointing out, during a lecture by the author in Montpellier in October 1990 presenting the main results of the present paper, that existence results in Section 2 of the present paper can be dissociated from estimates.