中子法测量沥青含量

讨论了沥青混合料中沥青含量的中子测量方法，比较了几种测量结构，给出了最佳测量结构及其测量结果与离心分离法的比较．     

Effets des forces de Coriolis sur le seuil convectif stationnaire d'une couche liquide confinée en cellule de Hele–Shaw annulaire en rotationEffects of the Coriolis forces on the stationary convectif threshold of a liquid layer confined in an annular Hele–Shaw Cell in rotation

The convective instability of a horizontal liquid layer confined in an annular Hele–Shaw cell subject to a constant rotation and submitted to a centrifugal gradient of temperature is investigated. Using a linear stability analysis, we study the effects of both Coriolis forces and curvature aspect on the stationary convective threshold when the Prandtl number is of the order of unity or larger than unity. We show that the Coriolis forces have a stabilizing effect, and the wave number is independent of these forces. However, a multicellular regime in the radial direction is observed for small Ekman numbers. The results related to the influence of the curvature are also shown. To cite this article: S. Ramezani et al., C. R. Mecanique 330 (2002) 633–640.     

计算三维定轴旋转体离心力荷载的原理与程序实施方法

本文给出三维定轴旋转体离心力荷载的计算原理和在通用有限元程序系统中实施的简单方法。     

Role of a high ground-state centrifugal barrier in the breakup of the 31Ne nucleus

An analysis of the breakup of the \begin{document}$ ^{31}{\rm Ne} $\end{document} weakly-bound neutron-halo system on a lead target is presented, considering the \begin{document}$ 2p_{3/2} $\end{document} and \begin{document}$ 1f_{7/2} $\end{document} ground-state configurations. It is shown that a high centrifugal barrier almost wipes out the breakup channel, thus assimilating the breakup of a weakly-bound system to that of a tightly-bound system, and also reduces the range of the monopole nuclear potential. Consequently, a high centrifugal barrier prevents the suppression of the Coulomb-nuclear interference (CNI) peak by weakening couplings to the breakup channel and reducing the range of the monopole nuclear potential, two main factors that would otherwise suppress such a peak. The present study also identifies couplings to the breakup channel and a long-ranged monopole nuclear potential as the main factors that lead to the suppression of the CNI peak. A low centrifugal barrier together with a Coulomb barrier would also effectively prevent the suppression of the CNI peak in proton-halos as reported in the case of the \begin{document}$ ^8{\rm B} $\end{document} proton-halo.     

压气机超速制造时弹塑性接触的数值模拟

“叶轮超速工艺“是叶轮制造中的一种重要方法.以某柴油机涡轮增压器的压气机为例,采用有限元参数二次规划法结合多重子结构技术分析模拟超速预加载制造时叶轮、轴套与轴之间接触应力的相应分布规律.针对不同的超速转速进行了大量计算,获得了超速转速与接触应力;超速转速与压气机内孔最大残余变形量;超速转速与轴套壁厚之间的关系.结果表明本文所采用的分析方法是可行的,弹塑性接触分析结果可作为叶轮设计及加工工艺的参考.     

透平机械离心压缩机和离心泵叶轮动力分析的三维旋转循环对称CN群算法

以离心压缩机叶轮为例,建立三维有限元模型,采用循环对称CN群算法计算了它的动力特性,详细讨论离心力作用下叶轮的应力状态,分析与轴连接的不同方式对叶轮应力的影响。应用循环对称算法能大大减少建模与计算的工作量,有很好的实用价值。计算结果表明,离心压缩机叶轮在旋转中,叶轮外缘应力比较高,轮盖上的应力较轮盘上的应力大,叶片根部容易产生应力集中,应采用适当的园角避免应力集中,过盈配合的叶轮内孔处应力比较大,需要确定合理的过盈量,既要保证叶轮不松动也要保证叶轮内孔处的强度条件。     

离心通风机蜗壳内部三维流动的测量和分析

利用五孔探针对离心通风机大宽度矩形截面蜗壳内部的三维流动进行了详细的测量 ,给出了蜗壳螺旋通道部分八个横截面内比较清晰的时均速度、静压和总压的分布图形 ,反映了二次旋涡的形成与发展、通流方向的扩压流动和叶轮轮盖外侧蜗壳空腔下部流动的变化、蜗舌附近的气流冲击和内泄漏现象等 ,并对这种蜗壳存在的主要损失进行了初步分类。     

离心泵叶轮轴面流道计算新方法

现有的两类一元理论离心泵叶轮水力设计方法存在试凑性工作量大或盖板形状不为简单曲线的缺陷。本文提出了符合一元理论的离心泵叶轮轴面流道过流断面的一种新的分布规律,并给出了按照此分布规律计算叶轮轴面流道过流面积的计算方法和公式。将其与传统的两类设计方法做了比较。     

叶顶间隙对离心压气机性能影响的研究

叶顶间隙的研究长期以来一直是叶轮机械研究和设计的热点和难点。本文采用CFD软件研究了进口叶尖相对马赫数分别为0．9、1．15、1．3时,有、无间隙的离心叶轮的气动性能,比较了压比、效率及流量的差别。并分析了用于 100 kW微型燃气轮机的高压比、高转速离心压气机在三种不同尺寸叶顶间隙下的性能,讨论了间隙影响的原因。数值模拟结果表明,叶顶间隙在一定范围内时,间隙主要减弱叶轮的升压能力,基本不影响效率和阻塞流量。