磷酸三丁酯增敏极谱法测定铜的研究

在０．００４ｍｏｌ／Ｌ ＨＣｌ－１×１０＾－３ｍｏｌ／Ｌ ＳＣＮ＾－－５×１０＾－５ｍｏｌ／Ｌ磷酸三丁酯（ＴＢＰ）溶液中，Ｃｕ＾２＋可在－０．４２Ｖ（ｖｓ．ＳＣＥ）产生灵敏的极谱波，波高较无ＴＢＰ存在时增加近３倍，二阶导数峰电流与０．００５￣４．０ｍｇ／Ｌ Ｃｕ＾２＋呈线性关系。研究了极谱波性质及增敏机理，表明该极谱波为配合物吸附波，ＴＢＰ起协同吸附作用。本法已用于实际样品分析，结果满意。     

Novel simulated moving-bed adsorber for the fractionation of gas mixtures

The separation of propylene-propane mixture is an energy intensive operation commercially practiced using cryogenic distillation. The separation by pressure swing adsorption has been studied as an alternative. A fixed-bed pressure swing adsorption yields the heavy component as a pure product. The product recovery and the productivity are not high. In a moving-bed process, because of the counter-current solid-gas contact, the separation achieved is similar to that of the fractionation by distillation. Although the moving-bed operation offers the upper limit for the performance of a cyclic adsorptive process, due to mechanical complexities in the handling of solids the 'simulated' moving-bed is preferred. By moving the inlet and outlet ports of streams located along the length of the bed, a moving-bed process can be realized in a fixed bed. We describe here a 'moving-port' system which permits injection or withdrawal of the fluid along the axial direction in a fixed bed. A fixed bed embedded with the moving-port systems emulates a simulated moving-bed adsorber. The proposed adsorber can fractionate a binary gas mixture into two product streams with high purities. It is similar to the Sorbex process of UOP but does not have the eluent as an additional separating agent. A parametric study indicates that high purity products and a higher productivity by an order of magnitude can be achieved with simulated moving-beds compared to the fixed beds.     

Selective Oxidation of Isobutene over CsFeCoBiMnMoOx Mixed Oxide Catalyst

Mixed oxide catalyst Cs0.1Fe2Co6BiMnMo12Ox was prepared by the coprecipitation method.Selective oxidation of isobutene was carried out in a fixed-bed reactor over Cs0.1Fe2Co6BiMnMo12Ox.The results showed that the catalyst had high catalytic activity. Under the optimum reaction conditions(n(i-C4):n(O2)=1:2-1:4, space velocity=180 h^-1, T=360℃), the yields of methacrolein and methacrylic acid can reach 80% and 8%, respectively. The total yield of liquid products (methacrolein, methacrylic acid and acetic acid) can reach about 90%.     

Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

A Magnesium-Selective Ionophore Containing Four Amide Carbonyl Ligands Derived from L-Tartaric Acid and Axial Furano Oxygen Binding Sites

Octahedrally converging hexadentate macrocyclic receptors 1 and 2, based on L-tartaric acid and furanmoieties, were synthesized andtheir complexation properties studied. In this paper,magnesium ion selectivitiesdetermined by ISE experiments, chiroptical changes observedby circular dichroism(CD) on complexation, and association constants measuredby NMR titration arediscussed.     

锆氢化反应研究 Ⅰ.酯类及双官能团化合物的锆氢化反应

本工作以一氯一氢二茂锆为还原试剂,对苯甲酸苯乙酯和苯甲酸甲酯进行还原,对还原的条件及水解产物的分离鉴定进行了研究。并对同时含酯基与其它官能团的几种化合物进行了选择性还原,列出了官能团还原先后的顺序,对结果进行了讨论。     

三硝基苯磺酸离子选择电极的制备和应用

三硝基苯磺酸是氨基酸分析常用试剂,在水溶液中它是稳定的一价阴离子。Sarantonis曾研制液膜型三硝基苯磺酸离子选择电极,间接测定氨基酸的浓度,其电极的线性响应范围为1.1×10~(-1)～5.1×10~(-5)mol·L~(-1)。     

Coupling between polymer adsorption and colloidal particle aggregation

Studies of the adsorption of high molecular weight polymers on colloidal latex and silica particles and their subsequent flocculation were carried out. Neutral polyethylene oxide samples with both a narrow and a broad molecular weight distribution were used together with low charged cationic copolymers. The influence of the particle concentration and polymer dose on the flocculation were systematically investigated under quiescent conditions.Equilibrium bridging only occurred with polyelectrolyte, even in very dilute suspensions, at high particle coverage. In contrast to this, non-equilibrium bridging occurred with both neutral polymer and polyelectrolytes but only for more concentrated suspensions and small amounts of adsorbed polymer. Polymer adsorption in dilute suspensions, which did not show particle aggregation was measured an electrophoretic technique. In more concentrated suspensions, where flocculation takes place, we found that aggregation prevents further polymer adsorption and induces both an excluded volume and a surface effect. The consequences on the shape of the isotherms differ according to the aggregation mechanism.A significant decrease of the amount, , of adsorbed polymer is observed with non-equilibrium bridging. When both mechanisms simultaneously contribute to the aggregation, the value of depends on their relative importance. In the intermediate range of copolymer dose their respective contributions are critically sensitive to the details of the mixing step and stirring, leading to non reproducible experimental results.     

Na2SeO3在Fe电极上还原和吸附机理

采用循环伏安法、恒电势电解法、恒电流阶跃法及交流阻抗法研究Na2SeO3提高锌锰合金电沉积电流效率的作用机理.证明在锌锰合金电沉积的条件下，Na2SeO3 阴极被还原为Se32－并吸附在阴极表面上，从而阻止了氢原子在阴极表面的吸附，因而减少了氢离子的阴极还原.拟定了Na2SeO3的反应和吸附机理，用交流阻抗法进一步证明了所拟机理的正确性.     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.