CdSe纳米线阵列的制备及其表征(英)

通过在含有SeSO₃^2-和Cd²⁺的室温水溶液中，用模板-电沉积法在纳米孔阵列阳极氧化铝膜(AAM)模板中制备了高有序性的CdSe纳米线阵列，并对其形貌、结构和组分进行了表征。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明，纳米线阵列中的CdSe纳米线具有相同的长度和直径，分别对应于使用的AAM模板的厚度和孔径；X-射线衍射(XRD)和X-射线能谱(EDAX)结果表明，CdSe纳米线中Cd和Se的化学组成非常接近于1∶1，其结构为立方CdSe。另外，对模板-电沉积法制备CdSe纳米线的机理进行了讨论。     

ATOMIC FORCE MICROSCOPY STUDIES OF POLYCAPROLACTONE RINGED SPHERULITES*

The surface morphology of free-surface PCL ringed spherulites was investigated by using atomic forcemicroscopy. The spherulites were obtained by crystallization of PCL/PVC blends of different compositions. It was found thatthe ringed spherulite exhibited regularly fluctuating rings on its surface. Compared with the bright-dark ring pattern of thespherulite under a polarizing microscope, it was proved that the optical characteristics of the ringed spherulite underpolarizing microscope coincided with its surface characteristics. The bright rings in polarizing micrographs of the spherulite coincided with the convex rings on its surface, while the dark rings coincided with the concave rings.     

Morphology control of soap-free seeded P(St-EA-AA) latex particles

Soap-free poly(styrene-ethyl acrylate-acrylic acid) latex particles with narrow size distribution and with surface carboxyl groups were synthesized by semicontinuous emulsion polymerization, and the particles with homogeneous multihollow structure were obtained after alkali posttreatment. Effects of treatment conditions and crosslinking agents on particle morphology were investigated. Results showed that the multihollow structure can be formed inside the uncrosslinked particles only when the treatment temperature exceeded 50 °C, the pH was higher than 10.0, the amount of 2-butanone was more than 3.0 ml and the treatment time was longer than 30 min. Furthermore, the volume expansion of the particles increased with the temperature increased to 90 °C, the pH to 12.5 or the amount of 2-butanone to 7.0 ml, and this value increased first and then decreased with the treatment time prolonged. Fine pores can be generated in the shell of particles crosslinked by 0.2 g of ethyl glycol dimethylacrylate (EGDMA), while no hollow structure formed inside particles when 0.4 g of EGDMA or 0.2 g of divinyl benzene was used.     

Thermal Analysis of Acrylonitrile Polymerization and Cyclization in the Presence of N,N-Dimethylformamide

This paper examines the polymerization of acrylonitrile to poly(acrylonitrile)(PAN), and its cyclization, in bulk form and using N,N-dimethylformamide (DMF) as solvent in which both monomer and polymer are soluble. Thermal analysis of the resultant products after polymerization has been performed by DSC and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). Scanning electron microscopy has been used to study the morphology of the resultant products and after thermal treatments. The DSC thermal curve of PAN-DMF sample is quite different from the PAN bulk sample, showing a single sharp exothermic peak associated with nitrile group polymerization (cyclization) of PAN at lower temperature (240°C) than that of bulk PAN sample (314°C). Cyclization of PAN was confirmed by IR spectroscopy. It was found that the amide molecules are difficult to eliminate completely in the product obtained after the polymerization reaction, even after prolonged heating at 110°C, and remain occluded. The formation of a complex by dipolar bonding is also possible and it is discussed. It is concluded that the amount of heat evolved as well as the temperature interval over which it is released are influenced by the chemical processing of PAN when using DMF as solvent of both monomer and polymer. Pyrolysis of these PAN samples revealed the release of occluded molecules of DMF, and several compounds containing nitrogen produced from the thermal degradation processes. All these results are interesting to know the chemical processing of carbon fibres and activated carbon fibres from PAN modified precursors.This revised version was published online in November 2005 with corrections to the Cover Date.     

Atomic structure of InAs quantum dots on GaAs

In recent years, the self-assembled growth of semiconductor nanostructures, that show quantum size effects, has been of considerable interest. Laser devices operating with self-assembled InAs quantum dots (QDs) embedded in GaAs have been demonstrated. Here, we report on the InAs/GaAs system and raise the question of how the shape of the QDs changes with the orientation of the GaAs substrate. The growth of the InAs QDs is understood in terms of the Stranski–Krastanow growth mode. For modeling the growth process, the shape and atomic structure of the QDs have to be known. This is a difficult task for such embedded entities.

In our approach, InAs is grown by molecular beam epitaxy on GaAs until self-assembled QDs are formed. At this point the growth is interrupted and atomically resolved scanning tunneling microscopy (STM) images are acquired. We used preparation parameters known from the numerous publications on InAs/GaAs. In order to learn more about the self-assemblage process we studied QD formation on different GaAs(0 0 1), (1 1 3)A, and ( )B substrates. From the atomically resolved STM images we could determine the shape of the QDs. The quantum “dots” are generally rather flat entities better characterized as “lenses”. In order to achieve this flatness, the QDs are terminated by high-index bounding facets on low-index substrates and vice versa. Our results will be summarized in comparison with the existing literature.     

聚芳醚酮高温长时间下的断裂行为3．韧性－脆性断裂转变

研究了聚芳醚酮（ＰＥＫ－Ｃ）在２００℃下长时间放置过程中拉伸断裂行为的变化．通过应力－应变实验、断面形貌观察及去老化现象的研究证实，２００℃下长时间放置后的ＰＥＫ－Ｃ的拉伸断裂行为，发生韧性－脆性转变，发生这一转变的时间约在５８９小时左右．伴随１９９℃下的拉伸过程中出现的去老化现象，决定于材料发生剪切屈服形变的能力，与韧性－脆性断裂行为转变有着本质的联系．     

含柔性间隔基的热致液晶性共聚酯的结晶形态

采用偏光显微镜、扫描和透射电镜从不同层次的结构水平上研究了含柔性间隔基热致液晶性共聚酯的结晶形态。在偏光显微镜下观察到典型的负光性球晶形态,透射电镜揭示了球晶是由厚度为10nm并沿着径向生长的片晶结构所组成,分子链沿晶片厚度方向取向排列。并研究了分子链的刚性程度对热致聚芳酯结晶性质的影响。结果表明,分子链刚性越大其结晶性和球晶的完善性越高。     

聚偏氟乙烯取向薄膜的结晶形态

本文用小角激光散射法研究了聚偏氟乙烯薄膜在拉伸取向过程中晶体形态及结构的变化。拉伸使球晶形变为椭球,同时伴随着局部熔融与重结晶过程,散射图案由原来的四叶瓣发展为八叶瓣。红外测量及X-射线衍射分析表明,拉伸引起分子链构象改变,使晶型发生了转变。     

Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．