Application of Tungsten-Rhodium Permanent Chemical Modifier in Slurry Analysis: Determination of Cadmium

 A tungsten-rhodium coating on the integrated platform of a transversely heated graphite atomiser (THGA) was used as a permanent chemical modifier for the determination of Cd in sediment slurries by electrothermal atomic absorption spectrometry. Slurries were ultrasonicated during 20 s before being delivered to the previously W-Rh treated platform. The permanent W-Rh modifier remains stable by approximately 250 measurements when 20 μl of slurries containing up to 1.0% m/v are delivered into the atomiser. In addition, the permanent modifier increases the tube lifetime up to 720 analytical firings. Also, when the W-Rh permanent modifier was employed, there was less variation of the slope of the analytical curves during the total atomiser lifetime, resulting in a decreased need of re-calibration during routine analysis, increasing the sample throughput. The atomiser lifetime was limited to the THGA wall durability, because the W-Rh treated platform was intact after more than 720 analytical firings. Detection limits based on integrated absorbance for 1.0% m/v slurries were 1.5 ng g⁻¹ Cd for 250 μg W +200 μg Rh permanent modifier and 11.5 ng⁻¹ Cd for 5 μg Pd +3 μg Mg(NO₃)₂. Results for the determination of cadmium in sediment slurries using the W-Rh permanent modifier were in agreement with those obtained with dissolved sample solutions by using Pd + Mg(NO₃)₂, since no statistical differences were found by the paired t-test at the 99% level. Received September 6, 1999. Revision December 1, 1999.     

Pyrite Genesis During Early Diagenesis in Yellow Sea and East China Sea

The content and isotopic compositions of different sulphur species in pore-water and solid phases have been examined on five sediment cores taken from muddy sediment region in the Yellow Sea and the East China Sea. Relationships among these data have been investigated with the combination of morphology of mineral pyrite and organic matter so as to role out the diagenetic behaviour of sulphur species at the early stage of diagenesis in modern marine sediment and the origin of pyrite formation.     

Anisotropy of the spatial distribution of CO molecules desorbing from tungsten

The desorption of CO from an anisotropic surface of polycrystalline tungsten after different periods of annealing has been studied. Anisotropy in the spatial distribution of CO molecules in the desorbing flux was detected at early stages of annealing. Smoothing out of the surface texture during annealing recorded by means of STM resulted in the disappearance of the spatial distribution anisotropy. The results are quantitatively explained by the model of a rough surface.⁷ Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 999–1002, June, 1994.The authors express their profound gratitude to Prof. V. I. Panov and his collaborators for making it possible to carry out measurements with a tunneling microscope and for their help.     

用胶束电动毛细管色谱法测定海洋沉积物中苯系物

海洋沉积物中苯系物的分析和测量对海洋石油化探具有重要意义。作者用胶束电动毛细管色谱法对海洋沉积物中苯系物进行了测定。考察了十二烷基硫酸钠 (SDS)的浓度和有机添加剂对分离的影响以及影响峰面积重现性和迁移时间的因素。苯系物的浓度和对应的峰面积成良好的线性关系。将该法用来分析石油勘探远景区域海洋沉积物中的苯系物 ,得到了它们的含量范围。     

Interlaboratory Study to Improve the Quality Control of Methylmercury Determination in Sediment

The results are presented of an interlaboratory study on methylmercury (MeHg) in sediment carried out by a group of European laboratories within the framework of a project managed by the EC Standards, Measurements and Testing Programme (formerly BCR). The aim of this exercise was to evaluate the performance of current methods used for MeHg determination in sediment in order to improve the state-of-the-art prior to the certification of a candidate reference material. The paper describes the organization of the interlaboratory study, the preparation of the sediment material used, the techniques evaluated and the results obtained by the participating laboratories. The outcome of the collaborative project showed that certification could be contemplated, providing that certain analytical techniques were optimized, especially with regard to extraction methods.     

CONCENTRATION, SOURCE OF MANGANESE AND IRON IN FERROMANGANESE NODULES AND THE RELATIONSHIP BETWEEN NODULES AND SEDIMENTARY ENVIRONMENTS IN NORTH PACIFIC REGION

The concentration, source of manganese and iron in ferromanganese nodules and therelation between nodules and sedimentary environments are discussed in detail by asynthetical study on chemical information of ferromanganese nodules and correspondingsediment, pore water and geological, biological (bacteria) information in 26 stations fromthe North Pacific region (7- 13°N, 178- 165°W). The result shows that (i) the concen-tration and distribution characteristics of magnese and iron in ferromanganese nod-ules differ in different types of nodules, however, the concentration decreases with theincrease in grain sizes of nodules; (ii) the source of iron in different types of nodulesis basically the same, i. e. the slow sedimentation of overlying water; (iii) manganesein nodules comes mainly from the diffusion of Mn~(2+) in the pore water, and Mn~(2+) fromthe reduction of Mn~(4+) in sediments by the medium of bacteria. As the distribution of bac-teria is believed to be strongly affected by the sedimentary envi     

气相色谱-质谱法检测沉积物中自由态与束缚态多溴联苯醚和四溴双酚-A

建立了一种同时测定沉积物中不同赋存形态的多溴联苯醚(PBDEs)和四溴双酚A(TBBPA)的分析方法.样品由等体积的丙酮和正己烷混合溶剂抽提得到自由态目标物,再通过碱性水解反应释放束缚态目标化合物.通过调节酸度(pH值)实现PBDEs和TBBPA的分离和提取.PBDEs由复合硅胶柱净化,运用气相色谱-质谱(负离子化学源)-分时段选择离子监测技术测定;TBBPA经重氮甲烷衍生化反应后由酸性硅胶柱预纯化,运用气相色谱-质谱(电子轰击源)-分时段选择离子监测技术测定.8种低溴联苯醚(BDE28,-47,-66,-100,-99,-154,-153,-183),十溴联苯醚(BDE209)和TBBPA的检出限分别为0.6～12.5 pg/g,172 pg/g,4 2 pg/g.方法具有良好的准确度和精确度,回收率均在74%～106%之间,RSD≤10%.对东江沉积物样品的分析表明,本方法能够实现不同形态的PBDEs 和TBBPA的有效检测.     

中国海大陆架沉积物超细标准物质系列研制

5个中国海大陆架沉积物标准物质的原样分别取自东海和南海,样品风干后,先经球磨制备成200目的均匀粉体,再用气流磨进一步加工成超细粒度的均匀样品.采用激光粒度仪检测了样品的粒度分布,5个样品的平均粒度均小于4 μm(约800目).采用高精度的XRF检验了样品的均匀性并以高灵敏度的ICP-AES、ICP-MS相配合确定了其最小取样量(5 mg).有12个实验室参加了合作定值研究,定值组分均为60个,其中MSCS-1,2分别有50和51个组分定为标准值,MSCS-3,4,5有52个组分定为标准值.全组分百分总和分别为99.9%, 99.9%, 100.4%, 100.1%和99.7%.