Thermodynamic quantities for the interaction of SO 4 2− with H+ and Na+ in aqueous solution from 150 to 320°C

The aqueous reactions,

Enthalpies of Phase Transitions and Heat Capacity of TbCl3 and Compounds Formed in TbCl3–MCl Systems (M=K, Rb, Cs)

The molar enthalpies of the solid–solid and solid–liquid phase transitions were determined by differential scanning calorimetry for pure TbCl₃ and KTb₂Cl₇, RbTb₂Cl₇, CsTb₂Cl₇, K₃TbCl₆, Rb₃TbCl₆ and Cs₃TbCl₆ compounds. Both types of compounds, i.e. M₃TbCl₆ and MTb₂Cl₇ (M=K, Rb, Cs) melt congruently and show additionally a solid–solid phase transition with a corresponding enthalpy Δ_trs H ⁰ of 6.1, 7.6 and 7.0 kJ mol^–1 for potassium, rubidium and caesium M₃TbCl₆ compounds andΔ_trs H ⁰ of 17.1 (rubidium) and of 12.1 and 10.9 kJ mol^–1 (caesium) for MTb₂Cl₇ compounds, respectively. The enthalpies of fusion were measured for all the above compounds with the exception of Rb₃TbCl₆ and Cs₃TbCl₆. The heat capacities of the solid and liquid compounds have been determined by differential scanning calorimetry (DSC) in the temperature range 300–1100 K. The experimental heat capacity strongly increases in the vicinity of a phase transition, but varies smoothly in the temperature ranges excluding these transformations. C _p data were fitted by an equation, which provided a satisfactory representation up to the temperatures of C _p discontinuity. The measured heat capacities were checked for consistency by calculating the enthalpy of formation of the liquid phase, which had been previously measured. The results obtained agreed satisfactorily with these experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Heat Capacities of Aqueous Solutions of Acetone; 2,5-Hexanedione; Diethyl Ether; 1,2-Dimethoxyethane; Benzyl Alcohol; and Cyclohexanol at Temperatures to 523 K

The heat capacities of aqueous solutions of acetone, 2,5-hexanedione, diethyl ether, 1,2-dimethoxyethane, benzyl alcohol and cyclohexanol at concentrations of 0.1 to 1.0 mol⋅kg⁻¹ were determined at temperatures of 298.15, 423.15, 473.15 and 523.15 K and pressures up to 28 MPa. The measurements were performed at ambient conditions using the commercial Picker differential flow calorimeter and at high temperatures and pressures with a customized Picker type calorimeter constructed at the Blaise Pascal University, Clermont-Ferrand. Standard molar heat capacities were obtained by weighted extrapolation to the infinite dilution limit. The contributions of –CO–, –O– and –OH groups to the standard molar volume and standard molar heat capacity were determined from the newly determined and literature data. The variation of the three oxygen-containing group contributions with temperature and molecular structure is examined qualitatively.     

Determination of long-lived radionuclides in concrete matrix by laser ablation inductively coupled plasma mass spectrometry

A laser ablation system using a Nd:YAG laser was coupled both to a quadrupole inductively coupled plasma (ICP) mass spectrometer and to a double-focusing sector field ICP mass spectrometer. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied for the determination of long-lived radionuclides in a concrete matrix. The investigated samples were two laboratory standards with a concrete matrix, which we doped with different long-lived radionuclides (e.g. ⁹⁹Tc, ²³²Th, ²³³U, ²³⁷Np) from the ng g⁻¹ to μ g⁻¹ concentration range and an undoped concrete material (blank). Detection limits for long-lived radionuclides in the 10 ng g⁻¹ range are reached for LA-ICP-MS using the quadrupole mass spectrometer. With double-focusing sector field ICP-MS, the limits of detection are in general one order of magnitude lower and reach the sub ng g⁻¹ range for ²³³U and ²³⁷Np. A comparison of mass spectrometric results with those of neutron activation analysis on undoped concrete sample indicates that a semiquantitative determination of the concentrations of the minor and trace elements in the concrete matrix is possible with LA-ICP-MS without using a standard reference material.     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.     

The structure of diluted binary solutions of amides according to the heat capacity data

The specific heat capacities of hexamethylphosphoric triamide, diethylpropionamide, their aqueous solutions, and mixtures of hexamethylphosphoric triamide with formamide were measured in the temperature range from 288.15 to 318.15 K. The dependences of the partial molar heat capacity of aqueous solutions of amides on the composition of the mixture have maxima in the region of 0.02–0.04 molar fractions of amide. The maximum on a similar dependence for solutions of hexamethylphosphoric triamide corresponds to the concentration of 0.01 molar fractions. The conclusion on the formation of solvates (hydrates) in the systems studied was made. The heat capacity coefficients of pair and triple interactions were calculated in terms of the McMillan-Mayer theory. A change in the heat capacity characteristics with the temperature change was analyzed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2479–2483, December, 1998.     

Sample capacity in open tubular and micro-packed columns for GC

Equations have been derived from which the maximum sample size which may be loaded on a column without significantly affecting the performance may be calculated. It is shown that micro-packed columns can handle a sample which is as much as forty times larger than that which can be loaded onto wall-coated open tubular columns with comparable conditions.     

A group additivity approach for the estimation of heat capacities of organic liquids and solids at 298 K

A group additivity method is described which provides heat capacity estimates of the condensed phase. The data base consists of 810 liquids and 446 solids. Group values for carbon in various common substitution and hybridization states and for 47 functional groups are provided. The standard error of estimation using this approach on this data base is 19.5 (liquids) and 26.9 J/ (mole K) (solids). This can be compared to typical experimental uncertainties of 8.12 and 23,4 J/ (mole K) associated with these measurements, respectively. Experimental uncertainties were estimated from the numerical differences obtained for a given substance from multiple independent literature reports.     

Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene-divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene-divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g⁻¹ for Ni(II), 35 mg g⁻¹ for Cu(II), 29 mg g⁻¹ for Fe(III) and 23 mg g⁻¹ for Pb(II). The optimum pH for the removal of metal ions was 3-5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4-5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t_1/2 values, indicating a better accessibility of the chelating sites.     

一些金属氧化物在TiO_2(锐钛矿)载体上的分散 嵌入模型的应用

一些金属氧化物在ＴｉＯ２（锐钛矿）载体上的分散＊嵌入模型的应用徐斌董林陈懿（南京大学化学系亚微观固态化学研究所，南京２１００９３）关键词嵌入模型，金属氧化物，分散容量，锐钛矿我们曾以γ－Ａｌ２Ｏ３，ＣｅＯ２和ＳｉＯ２为载体研究了离子化合物的分散，认为...