Apparent molar heat capacities of aqueous solutions of acetic,propanoic and succinic acids,sodium acetate and sodium propanoate from 300 to 525 K and a pressure of 28 MPa

The apparent molar heat capacities of dilute aqueous solutions of acetic, propanoic and succinic acid and sodium salts of the two monofunctional acids were measured at 300 Kp,2 ^o . After subtracting the heat capacity of a point mass, the remaining heat capacity was successfully decomposed into functional group contributions at all temperatures. Together with the results of our previous paper on alcohols and diols the heat capacity contributions of the CH₂, CH₃, OH, COOH, (COOH)₂, and COONa groups are now available and these allow reasonably accurate predictions of the heat capacities of all compounds composed of these groups in this temperature range.     

Thermodynamics of dimethylene urethane and poly(dimethylene urethane) in the range from T → 0 to 490 K at standard pressure

By high-precision dynamic calorimetry the temperature dependences of heat capacity of dimethylene urethane (DMU) between 320 and 370 K and partially crystalline poly(dimethylene urethane) (PDMU) in the range 326-490 K at standard pressure have been determined within ±1.5%. The thermodynamic characteristics of fusion of the substances, namely the temperature interval of melting, temperature, enthalpy and entropy of fusion, as well as the characteristics of devitrification and glassy state for poly(dimethylene urethane) have been estimated. The first and the second cryoscopic constants have been calculated for dimethylene urethane. The experimental data obtained in the present work and literature findings on the heat capacity of the substances were used to calculate their thermodynamic functions: the heat capacity C°_p (T), enthalpy H°(T)−H°(0), entropy S°(T) and Gibbs function G°(T)−H°(0) over the range from T→0 to (370-480) K. Based on the data, the thermodynamic characteristics of polymerization process with five-membered ring opening Δ_polH°, Δ_polS° and Δ_polG° of dimethylene urethane with the formation of linear partially crystalline poly(dimethylene urethane) have been evaluated.     

低于300℃时两种氧化铈材料对稀燃阶段NOx存储性能的影响

研究了低于300 ℃时两种氧化铈对稀燃阶段NO_x存储性能的影响,催化剂由2%（w）Pt/Al₂O₃（PA）与CeO₂-X（X=S,I）机械混合制备. X射线衍射（XRD）,BET表面积和扫描电子显微镜（SEM）用于表征材料的物理结构. X射线光电子能谱（XPS）和H₂程序升温还原（H₂-TPR）用于表面Ce³⁺和活性氧定量. 原位漫反射傅里叶变换红外光谱（in-situ DRIFTS）用于分析表面NO_x吸附物种. 相比于CeO₂-I,CeO₂-S 具有优良的物理化学性能,包括高比表面积、丰富的空隙结构、较高的抗老化能力及表面Ce³⁺浓度. 因而,Pt/Al₂O₃+CeO₂-S 表现出优异的NO_x存储能力. 此外,PA+CeO₂-X（X=S,I）上存在Pt 与CeO₂之间的相互作用,可提高表面氧物种的活性进而促进NO氧化及NO_x存储. PA+CeO₂-S上的这种相互作用要强于PA+CeO₂-I. 研究表明,表面Ce³⁺浓度和活性氧含量对NO_x存储起到重要作用. 然而经过水热处理后,Pt 与老化的氧化铈（ACS,ACI）之间的相互作用降低,并且两种氧化铈NO_x存储性能显著下降. 另外,与PA+ACS（ACI）相比,PA+PACS（PACI）样品NO_x存储能力得到改善,这归因于表面氧物种活性增加能促进硝酸盐的形成.     

Synthesis and Investigation of Soluble Polymer-supported Dendrimers

Poly（ethylene glycol） （PEG）-supported dendrimers have been synthesized using 2.4,6-trichloro-1,3,5-triazine （TCT） as dendrons and tris（hydroxymethyl）aminomethane as tinkers with high loading capacity, excellent solubility and thermal stability by divergent method. The new synthesized PEG-supported G2.0 dendrimer has 10 times as large functional group loading capacity as commercial PEG3400 with overall yield 44.0%.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Thermodynamic quantities for the interaction of SO 4 2− with H+ and Na+ in aqueous solution from 150 to 320°C

The aqueous reactions,

Enthalpies of Phase Transitions and Heat Capacity of TbCl3 and Compounds Formed in TbCl3–MCl Systems (M=K, Rb, Cs)

The molar enthalpies of the solid–solid and solid–liquid phase transitions were determined by differential scanning calorimetry for pure TbCl₃ and KTb₂Cl₇, RbTb₂Cl₇, CsTb₂Cl₇, K₃TbCl₆, Rb₃TbCl₆ and Cs₃TbCl₆ compounds. Both types of compounds, i.e. M₃TbCl₆ and MTb₂Cl₇ (M=K, Rb, Cs) melt congruently and show additionally a solid–solid phase transition with a corresponding enthalpy Δ_trs H ⁰ of 6.1, 7.6 and 7.0 kJ mol^–1 for potassium, rubidium and caesium M₃TbCl₆ compounds andΔ_trs H ⁰ of 17.1 (rubidium) and of 12.1 and 10.9 kJ mol^–1 (caesium) for MTb₂Cl₇ compounds, respectively. The enthalpies of fusion were measured for all the above compounds with the exception of Rb₃TbCl₆ and Cs₃TbCl₆. The heat capacities of the solid and liquid compounds have been determined by differential scanning calorimetry (DSC) in the temperature range 300–1100 K. The experimental heat capacity strongly increases in the vicinity of a phase transition, but varies smoothly in the temperature ranges excluding these transformations. C _p data were fitted by an equation, which provided a satisfactory representation up to the temperatures of C _p discontinuity. The measured heat capacities were checked for consistency by calculating the enthalpy of formation of the liquid phase, which had been previously measured. The results obtained agreed satisfactorily with these experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Heat Capacities of Aqueous Solutions of Acetone; 2,5-Hexanedione; Diethyl Ether; 1,2-Dimethoxyethane; Benzyl Alcohol; and Cyclohexanol at Temperatures to 523 K

The heat capacities of aqueous solutions of acetone, 2,5-hexanedione, diethyl ether, 1,2-dimethoxyethane, benzyl alcohol and cyclohexanol at concentrations of 0.1 to 1.0 mol⋅kg⁻¹ were determined at temperatures of 298.15, 423.15, 473.15 and 523.15 K and pressures up to 28 MPa. The measurements were performed at ambient conditions using the commercial Picker differential flow calorimeter and at high temperatures and pressures with a customized Picker type calorimeter constructed at the Blaise Pascal University, Clermont-Ferrand. Standard molar heat capacities were obtained by weighted extrapolation to the infinite dilution limit. The contributions of –CO–, –O– and –OH groups to the standard molar volume and standard molar heat capacity were determined from the newly determined and literature data. The variation of the three oxygen-containing group contributions with temperature and molecular structure is examined qualitatively.     

Determination of long-lived radionuclides in concrete matrix by laser ablation inductively coupled plasma mass spectrometry

A laser ablation system using a Nd:YAG laser was coupled both to a quadrupole inductively coupled plasma (ICP) mass spectrometer and to a double-focusing sector field ICP mass spectrometer. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied for the determination of long-lived radionuclides in a concrete matrix. The investigated samples were two laboratory standards with a concrete matrix, which we doped with different long-lived radionuclides (e.g. ⁹⁹Tc, ²³²Th, ²³³U, ²³⁷Np) from the ng g⁻¹ to μ g⁻¹ concentration range and an undoped concrete material (blank). Detection limits for long-lived radionuclides in the 10 ng g⁻¹ range are reached for LA-ICP-MS using the quadrupole mass spectrometer. With double-focusing sector field ICP-MS, the limits of detection are in general one order of magnitude lower and reach the sub ng g⁻¹ range for ²³³U and ²³⁷Np. A comparison of mass spectrometric results with those of neutron activation analysis on undoped concrete sample indicates that a semiquantitative determination of the concentrations of the minor and trace elements in the concrete matrix is possible with LA-ICP-MS without using a standard reference material.     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.