A new inorganic-organic polymer for the passivation of thin film capacitors

Inorganic-organic polymers with barrier properties against water vapor, excellent electrical data (3, 2, R _D>10¹⁶ cm, E _D up to 400 V/µm) and good adhesion to various substrate materials have been developed. Tailored modifications of these materials provide an excellent protective coating for thin film capacitors. Several mm thick, expensive, encapsulations could be replaced by thin coatings (up to 10 µm). The polymer coating allows the use of thin film chip capacitors in surface-mount technology. As a measure for the efficiency of the coating, the capacitance decrease under controlled humidity has been used. The influence of the material composition, the type of catalyst during sol-gel processing and the curing conditions have been studied. Adhesion and water vapor permeation properties of the polymers and rheological properties of the coating solutions have been investigated. A protective coating is developed, which increases the withstandness of capacitors against humid conditions (90°C, 100% rel. humidity) by a factor of about 30 (compared to uncoated capacitors) and shows no crack formation during thermal cycling.     

含钼杂多酸盐对碳钢缓蚀性能的研究

采用失重法考察了６种具有Ｋｅｇｇｉｎ结构的含钼杂多酸盐在ＮａＣｌ介质中对碳钢的缓蚀作用。实验表明,所研究的化合物均有一定的缓蚀性能,尤其抑制点蚀效果很好。     

Determination of particulate fatty acids as P-bromophenacyl- or phenylphenacylesters using HPLC

Summary A method for the determination of fatty acids of the molecular weight range of propionic to erucic acid is reported. The acids are converted to either p-bromophenacyl-or p-phenylphenacylesters and the esters are separated by HPLC and detected by UV-absorption. Twentytwo esters, including saturated, monoolefinic and polyunsaturated ones were separated within one HPLC-run. The detection limit is about 5 pmol per fatty acid. The application of the method to particulate material is described.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Salting coefficients for gases in seawater from scaled-particle theory

Experimental values of the salting coefficients for He, Ne, Ar, O₂, and N₂ in seawater are compared with values calculated from scaled-particle theory. The agreement is reasonably good; the average difference between calculated and observed values at 25°C is 0.007. Scaled-particle theory predicts correctly thatk _s should decrease as the temperature increases and that this effect should be most pronounced at low temperatures. However, the predicted magnitude ofdK _s/dt is only about half of that observed.     

非晶态镍磷—镍钨磷双层组合镀层的耐蚀性能研究

本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能，分别进行了各种镀层的浸渍腐蚀实验，镀层的Ｘ射线衍射图象、镀层的扫描电镜图象、以及在工厂实际的腐蚀环境里进行的腐蚀实验。实验结果表明镍磷及镍钨磷双层组合镀层的耐 性优于镍磷镀层、镍钨磷镀层的耐蚀性。     

A low-cost lead-acid battery with high specific-energy

Lightweight grids for lead-acid battery grids have been prepared from acrylonitrile butadiene styrene (ABS) copolymer followed by coating with lead. Subsequently, the grids have been electrochemically coated with a conductive and corrosion-resistant layer of polyaniline. These grids are about 75% lighter than those employed in conventional lead-acid batteries. Commercial-grade 6V/3.5Ah (C₂₀-rate) lead-acid batteries have been assembled and characterized employing positive and negative plates constituting these grids. The specific energy of such a lead-acid battery is about 50 Wh/kg. The batteries can withstand fast charge-discharge duty cycles. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Corrosion-stable nickel- and cobalt-based alloys for dental applications

In a comparative study the in vitro corrosion behavior of a selection of nickel- and cobalt-based alloys for application in dentistry containing no noble metals was studied with slow scan cyclic voltammetry. The obtained breakthrough potentials, the repassivation behavior and further typical features of the cyclic voltamograms are correlated with the chemical composition as measured with electron beam microanalysis. Surface inhomogenities detected with the latter method are discussed with respect to the electrochemical behavior. For all alloys stabilities in terms of breakthrough potential superior to previously reported data for nickel-base alloys are found.     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.