Experimental investigation of the effect of temperature on the strength of polyimide contact structures

A new photogrammetry based measurement technique for contact areas in line contact structures is developed. From the data collected by this technique, a method for measuring the contact strength of contact structures in high temperature applications is proposed. The contact strength of a line contact structure of polyimide at different temperatures is measured; the results show that the increase in temperature decreases the contact strength of the structure. The effect of temperature on the contact strength is studied by investigating the occurrence and evolution of yielding core within the structure at different temperatures. The decrease in the yield strength and elastic modulus of the polyimide material at high temperature induces core yielding at lower loads and eases the propagation of core yielding to the surface.     

Detection on micro-Doppler effect based on 1550 nm laser coherent radar

A laser coherent detection system of 1550 nm wavelength was presented, and experimental research on detecting micro-Doppler effect in a dynamic target was developed. In this paper, the return signal in the time domain is decomposed into a set of components in different wavelet-scales by multi-resolution analysis, and the components are associated with the vibrational motions in a target. The micro-Doppler signatures are extracted by applying the reconstruction (inverse wavelet transform). During the course of the final data processing frequency analysis and time–frequency analysis are applied to analyze the vibrational signals and estimate the motion parameters successfully. The experimental results indicate that the micro-Doppler information in a moving can be effectively detected, and tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analysis and time–frequency analysis.     

Nonlinear optical rectification in a two-dimensional system

The optical rectification (OR) in the two-dimensional electron–hole system is investigated theoretically. An analytical expression formula of the OR coefficient is obtained via the framework of compact density matrix approach and the iterative method. The results show that the OR coefficient depends strongly on the system׳s size and the relaxation time. A more obvious OR coefficient should be found by adjusting an appropriate choice of the system parameters.     

Association and Dissociation of Grignard Reagents RMgCl and Their Turbo Variant RMgCl⋅LiCl

Grignard reagents RMgCl and their so‐called turbo variant, the highly reactive RMgCl?LiCl, are of exceptional synthetic utility. Nevertheless, it is still not fully understood which species these compounds form in solution and, in particular, in which way LiCl exerts its reactivity‐enhancing effect. A combination of electrospray‐ionization mass spectrometry, electrical conductivity measurements, NMR spectroscopy (including diffusion‐ordered spectroscopy), and quantum chemical calculations is used to analyze solutions of RMgCl (R=Me, Et, Bu, Hex, Oct, Dec, iPr, tBu, Ph) in tetrahydrofuran and other ethereal solvents in the absence and presence of stoichiometric amounts of LiCl. In tetrahydrofuran, RMgCl forms mononuclear species, which are converted into trinuclear anions as a result of the concentration increase experienced during the electrospray process. These trinuclear anions are theoretically predicted to adopt open cubic geometries, which remarkably resemble structural motifs previously found in the solid state. The molecular constituents of RMgCl and RMgCl?LiCl are interrelated via Schlenk equilibria and fast intermolecular exchange processes. A small portion of the Grignard reagent also forms anionic ate complexes in solution. The abundance of these more electron‐rich and hence supposedly more nucleophilic ate complexes strongly increases upon the addition of LiCl, thus rationalizing its beneficial effect on the reactivity of Grignard reagents.     

Identification of Compounds that Selectively Stabilize Specific G‐Quadruplex Structures by Using a Thioflavin T‐Displacement Assay as a Tool

Small molecules are used in the G‐quadruplex (G4) research field in vivo and in vitro, and there are increasing demands for ligands that selectively stabilize different G4 structures. Thioflavin T (ThT) emits an enhanced fluorescence signal when binding to G4 structures. Herein, we show that ThT can be competitively displaced by the binding of small molecules to G4 structures and develop a ThT‐displacement high‐throughput screening assay to find novel and selective G4‐binding compounds. We screened approximately 28 000 compounds by using three different G4 structures and identified eight novel G4 binders. Analysis of the structural conformation and stability of the G4 structures in presence of these compounds demonstrated that the four compounds enhance the thermal stabilization of the structures without affecting their structural conformation. In addition, all four compounds also increased the G4‐structure block of DNA synthesis by Taq DNA polymerase. Also, two of these compounds showed selectivity between certain Schizosaccharomyces pombe G4 structures, thus suggesting that these compounds or their analogues can be used as selective tools for G4 DNA studies.     

Improvement of solar cell efficiency by applying Si3N4 nanopattern on glass substrate

A cylindrical Si₃N₄ nanopattern whose heights was 200 nm was fabricated on a glass substrate, and an aluminum-doped zinc oxide (AZO) layer was grown on the nanopatterned glass substrate. The nanopattern was applied to an amorphous silicon solar cell in order to increase the light-scattering effect, thus enhancing the efficiency of the solar cell. The reflectance of the solar cell on the Si₃N₄ nanopattern decreased and its absorption increased. Compared to a flat substrate, the short-circuit current density (J_sc) and conversion efficiency of a solar cell on the Si₃N₄ nanopatterned substrate were improved by 17.9% and 24.2%, respectively, as determined from solar simulator measurements.     

Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Isobaric expansion coefficient and isothermal compressibility for a finite-size ideal Fermi gas system

Due to quantum size effects (QSEs), the isobaric thermal expansion coefficient and isothermal compressibility well defined for macroscopic systems are invalid for finite-size systems. The two parameters are redefined and calculated for a finite-size ideal Fermi gas confined in a rectangular container. It is found that the isobaric thermal expansion coefficient and isothermal compressibility are generally anisotropic, i.e., they are generally different in different directions. Moreover, it is found the thermal expansion coefficient may be negative in some directions under the condition that the pressures in all directions are kept constant.     

Identification of radical structures on 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5‐dimethylbenzimidazoliumsilver(I)bromide exposed to gamma rays: an EPR study

1‐Pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide and their Ag⁺ complexes were synthesized and their polycrystal forms were produced by recrystallization in dichloromethane/Et₂O solvent system. Structural determinations were carried out by ¹H NMR and ¹³C NMR with a Varian 400 NMR system using tetramethylsilane as internal standard and CDCl₃ as solvent. The disappearance of acidic N‐heterocyclic carbene proton showed the formation of Ag(I) complexes. Also, elemental analyses were carried out. Electron paramagnetic resonance (EPR) measurements were performed to determine the formed radical structure on the samples irradiated at the room temperature for 72 h by using ⁶⁰Co‐source with dose rate of 0.680 kGy. The EPR measurements were carried out in the temperature range of 200 K–450 K. Identical radicals were determined on the irradiated compounds. It was observed that the shapes of the spectra of the samples were independent of the temperature but, the resonance line intensities changed linearly with the temperature. Also, it was detected that the free radical on the 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide is not stable compared to that on the 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide. Copyright © 2016 John Wiley & Sons, Ltd.     

Calibration Curve with Improved Limit of Detection for Cadmium in Soil: An Approach to Minimize the Matrix Effect in Laser-Induced Breakdown Spectroscopic Analysis

The present article describes a working or combined calibration curve in laser-induced breakdown spectroscopic analysis, which is the cumulative result of the calibration curves obtained from neutral and singly ionized atomic emission spectral lines. This working calibration curve reduces the effect of change in matrix between different zone soils and certified soil samples because it includes both the species' (neutral and singly ionized) concentration of the element of interest. The limit of detection using a working calibration curve is found better as compared to its constituent calibration curves (i.e., individual calibration curves). The quantitative results obtained using the working calibration curve is in better agreement with the result of inductively coupled plasma–atomic emission spectroscopy as compared to the result obtained using its constituent calibration curves.