带有媒体影响上限的传染病模型研究

媒体报道对传染病的传播有着一定的影响,但它并不是影响其传播的本质因素.通过建立一个具有分段感染率的传染病模型来刻画媒体报道对传染病传播影响的饱和性.分析了系统各平衡态的局部稳定性,同时利用排除极限环的存在性证明了各平衡态的全局稳定性.最后,通过模拟来验证我们的理论分析.     

Effect of K4FE(CN)6 and K3FE(CN)6 on TICT Dual Fluorescence of Sodium p-Dimethylaminobenzoate in Cetyltrimethylammonium Chloride Micelle. Identification of the Magenetic Effect in TICT Process

Comparison of the effects of K₄Fe(CN)₆ and K₃Fe(CN)₆ on TICT dual fluorescence of sodium p-dimethylaminobenzoate (SDMAB) in cetyltrimethyl ammonium chloride (CTAC) micelle yields a conclusion that the presence of a magnetic effect un favors the TICT process, which is verified by inserting the sample in a stationary magnetic field of 100G in which a decrease in the relative quantum yield of TICT state is observed.     

Fe-8/11Mn-4Al-0.2C钢的力学性能及应变硬化行为

对Fe-8Mn-4Al-0.2C(8Mn)和Fe-11Mn-4Al-0.2C(11Mn)实验钢进行不同温度的淬火热处理,实现奥氏体体积分数和稳定性的最优化.通过拉伸实验可得,8Mn钢和11Mn钢在淬火温度为750℃时,获得最佳的力学性能组合,即强塑积为46.4 GPa%和66.9 GPa%.8Mn-750试样和11Mn-750试样在拉伸过程中表现出相同的三阶段应变硬化行为.通过XRD测定变形过程中奥氏体体积分数的变化,研究发现TRIP效应主要发生在变形的第二和第三阶段.11Mn-750试样由于具有更高的奥氏体含量、转变量和稳定性,使得其塑性远远高于8Mn-750试样.     

Operational issues and network effects in vaccine markets

One of the most important concerns for managing public health is the prevention of infectious diseases. Although vaccines provide the most effective means for preventing infectious diseases, there are two main reasons why it is often difficult to reach a socially optimal level of vaccine coverage: (i) the emergence of operational issues (such as yield uncertainty) on the supply side, and (ii) the existence of negative network effects on the consumption side. In particular, uncertainties about production yield and vaccine imperfections often make manufacturing some vaccines a risky process and may lead the manufacturer to produce below the socially optimal level. At the same time, negative network effects provide incentives to potential consumers to free ride off the immunity of the vaccinated population. In this research, we consider how a central policy-maker can induce a socially optimal vaccine coverage through the use of incentives to both consumers and the vaccine manufacturer. We consider a monopoly market for an imperfect vaccine; we show that a fixed two-part subsidy is unable to coordinate the market, but derive a two-part menu of subsidies that leads to a socially efficient level of coverage.     

Studies of Anion Transport Through Supported Liquid Membrane

Abstract

Transport studies of anions were investigated through cellulose triacetate supported liquid membrane. The experimental variables explored were concentration of anions, sodium hydroxide, and stirring speed. The two-channel membrane system has been explored for the transport of carbonate ions from source to receiving phases. Carbonate ions are selectively transported through the cellulose triacetate supported liquid membrane in comparison with that of nitrate and sulfate. Sulfate and nitrate anions are strongly held in the cellulose triacetate membrane, and then stripped out later. Carbonate ions are loosely bound to the cellulose triacetate membrane and stripped out earlier.     

不同应变率和温度下AFRP力学性能试验研究

利用MTS液压伺服高速试验机测试芳纶纤维(Kevlar 29)增强复合材料(AFRP)在不同应变率(25,50,100和200s-1)和温度(-25,0,25,50和100℃)条件下的力学性能.结果表明,在相同温度(25℃)下,随着应变率的增大,杨氏模量和拉伸强度先增大(25~50s-1)后减小(50~200s-1),而韧性则表现为相反的趋势.在相同应变率(25s-1)下,温度的升高会造成杨氏模量出现波动,拉伸强度上升,而韧性则没有明显的改变.不同试验条件下AFRP破坏形态没有明显区别,均为较平整断裂面.最后,通过Weibull分析,量化了破坏强度在不同应变率和温度下的离散程度.     

Monodisperse Crosslinked Microsphere Polymer Particles by Dispersion Copolymerization of Glycidyl Methacrylate and Divinylbenzene

Monodisperse polyglycidyl methacrylate (PGMA) microsphere particles crosslinked with divinylbenzene crosslinker were prepared by single-stage dispersion copolymerization in ethanol medium. 1 wt% of DVB was successfully incorporated due to the costabilizing effect of GMA as a surface-active monomer. This behavior may indicate that the fast formation of stable primary particle leads to monodispersity. The average particle sizes and the particle size distributions increased with the DVB crosslinker concentration. The effects of two different variables (initiator concentration, crosslinker concentration) on the rate of dispersion copolymerization have been investigated. With the initiator concentration, the polymerization procedure mainly depended on the dual natures of general dispersion polymerization, in the crosslinked state. Up to 1 wt% DVB, the particle growth was controlled by the monomer diffusion from the continuous phase into the particle phase.     

A Frustrated Phosphane–Borane Lewis Pair and Hydrogen: A Kinetics Study

The energy profile of a frustrated Lewis pair (FLP) dihydrogen splitting system was determined by a combined experimental kinetic and DFT study. A trimethylene‐bridged phosphane–borane FLP was converted into its endothermic H₂‐cleavage product by sequential H⁺/H^? addition. The system could be handled at low temperature, and the kinetics of the H₂ elimination were determined to give a rate constant of k_HH,exp(299 K)=(2.87±0.1)×10^?4 s^?1 in solution. The primary kinetic isotope effects were determined; for example, (k_HH/k_DD)_exp=3.19. The system was accurately analyzed by DFT calculations.