Measurement of the pion form factor for M_(ππ)～2 between 0.1 and 0.85 GeV~2 with the KLOE detector

The KLOE experiment at the φ-factory DAΦNE has measured the pion form factor in the range between 0.1M_(ππ)～2 0.85 GeV2 using events taken at s～(1/2)=1 GeV with a photon emitted at large polar angles in the initial state.This measurement extends the M_(ππ)～2 region covered by KLOE ISR measurements of the pion form factor down to the two pion production threshold.The value obtained in this measurement of the dipion contribution to the muon anomalous magnetic moment of aμππ =(478.5±2.0stat±4.8syst±2.9theo)·10-10 further confirms the discrepancy between the Standard Model evaluation for aμ and the experimental value measured by the(g-2) collaboration at BNL.     

On Calculations of Legendre Functions and Associated Legendre Functions of the First Kind of Complex Degree

Formulas for calculating Legendre functions and associated Legendre functions of the first kind of complex degree using an Ermakov—Lewis invariant are presented. These formulas are straight-forward to implement numerically and are motivated by the lack of computational routines in standard university tools like those of MatLab and Maple. Angular waves propagating in opposite directions are also obtained. The results are particularly useful in complex angular momentum theories and nearside/farside analysis of spin-dependent angular scattering from central potentials.     

OLED矩阵显示屏运动图像的一种实现方法

介绍了实现有机发光二极管 (OL ED)图形显示的一种方法 .通过设计软件 ,实现了无交叉效应、高清晰度的OL ED矩阵运动图像的图形显示     

光纤放大器中的受激布里渊散射阈值

从受激布里渊散射(SBS)耦合波理论出发,根据双包层光纤放大器中的受激布里渊散射阈值模型,理论仿真了信号带宽、纤芯直径、放大器增益对SBS阈值的影响,并从实验上研究了单频百纳秒脉冲信号在掺镱双包层光纤放大器中的受激布里渊散射现象。实验中输入脉冲信号重复频率1 Hz,脉宽200 ns,对不同的输入脉冲信号放大,前向放大脉冲在脉冲能量660 nJ、峰值功率3.3 W时出现畸变,产生后向SBS窄脉冲,达到了SBS阈值,实验计算的SBS阈值与理论分析结果基本一致。     

光纤式表面粗糙度测量仪的研制

本文论述了光纤式表面粗糙度测量仪研制过程中关键问题的解决方法，对非线性特性的参数计算、零点漂移、信号噪声、不同加工表面特性差异的处理都给出了完美的解决方法。该仪器以光散射理论为测量原理，用光纤为传输媒介，并用单片机８０９８进行计算、数据处理和测量智能控制。     

棉花三系配套的研究

利用棉花杂种优势,是提高产量和改进纤维品质的有效途径。推广杂种棉的关键措施是进行三系配套,实行不育化制种。我们于1985年以哈型雄性不育材料为不育“源”,以北疆推广品种“新陆早一号”和“66—241”为回交亲本,进行回交转育。经过三年的回交和定向选择,现已基本育成不育性稳定的,农艺性状接近回交亲本的四个新的雄性不育系。1987年,开始了恢复系的转育工作,并取得一定的研究结果。同时对不育系的自然授粉也进行了初步的研究,发现不育系对野蜂有某种吸引力,因而有较高的单株成铃数;这对制种工作是十分有利的。     

Surface‐enhanced Raman scattering investigations on silver nanoparticles deposited on alumina and titania nanotubes: influence of the substrate material on surface‐enhanced Raman scattering activity of Ag nanoparticles

Silver nanoparticles deposited on various ‘inert’ porous materials (mainly Al₂O₃ and TiO₂) are often used as substrates for surface‐enhanced Raman scattering (SERS) measurements. In this study, we used the sputter deposition technique to cover tubular arrays of Al₂O₃ and TiO₂ with Ag nanoparticles. Raman spectra of pyridine (as a probe molecule) and of two selected dyes (5‐(4‐dimethylaminobenzylidene)rhodanine and 5‐(4‐(dimethylamino)benzylidene)‐3‐(3‐methoxypropyl)rhodanine) adsorbed on fabricated Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al substrates were measured. We found that the SERS spectra of pyridine adsorbed on Ag nanoparticles deposited on an Al₂O₃‐n/Al substrate are distinctly different from those measured for an Ag/TiO₂‐n/Ti composite. Similar effects were observed for dyes adsorbed on the surface of both composites. The spectral differences between two kinds of composites (Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al) are discussed in terms of (1) the modified electronic structure of the Ag nanoparticles due to their interaction with different substrate materials and (2) the different atomic topology of the metal particles thus deposited on the surfaces of the substrates. Composite samples were also studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Copyright © 2012 John Wiley & Sons, Ltd.     

管模间隙对21-6-9高强不锈钢管数控绕弯成形质量的影响

基于ABAQUS/Explicit有限元平台,建立了21-6-9高强不锈钢管数控绕弯成形过程的三维弹塑性有限元模型,并验证了模型的可靠性.利用该模型研究了不同管模间隙对管材数控绕弯过程壁厚变化及截面畸变的影响规律.结果表明:增加管材-芯棒间隙、管材-防皱块间隙或减小管材-压块间隙、管材-弯曲模间隙可以减小壁厚减薄率;减小管材-芯棒间隙或增加管材-压块间隙可以减小壁厚增厚率,而其他管模间隙对壁厚增厚率的影响不显著;减小管材-压块间隙、管材-弯曲模间隙或增加管材-防皱块间隙可以减小截面畸变率,而增加管材-芯棒间隙,截面畸变率呈现先减小后增加的变化规律;获得了规格为Φ15.88 mm×t0.84 mm×R47.64 mm的21-6-9高强不锈钢弯管件较佳的管模间隙值.      

黄土高原西缘末次盛冰期以来古气候演化的有机碳同位素记录

综合CaCO3含量、碳酸盐碳、氧同位素资料，并结合研究区的区域特征，对兰州红咀寺剖面有机碳同位素气候指示意义进行了研究．结果表明，在黄土高原西缘，有机碳同位素δ^13Corg波动反映C3／C4植物比例改变，指示温度变化．δ^13Corg值偏正时，表明C4植物含量较大，反映温度较高．有机碳同位素和CaCO3含量、碳酸盐碳、氧同位素共同揭示了兰州地区末次盛冰期气候较全新世明显偏低，在11．5kaBP，13．9kaBP存在两次明显的降温；进人全新世以后，兰州气候开始逐渐变暖，但仍存在8．8kaBP、5．0kaBP和3．2kaBP的三次突然升温以及8．0kaBP、6．8kaBP和5．3kaBP的降温事件，说明了兰州地区气候变化的复杂性和不稳定性．     

小断面收缩率轴类零件楔横轧成形的可行性分析

利用ANSYS/LS-DYNA软件,对楔横轧小断面收缩率轴类零件的成形过程进行了有限元数值模拟,通过与常规断面收缩率轧件对比,分析了小断面收缩率轧件的表面和心部质量情况.结果表明:相同工艺参数条件下,小断面收缩率轧件横截面的椭圆度大于常规断面收缩率轧件;由于小断面收缩率轧件中心点处的平均应力和最大主应力均较大,因而更容易发生心部缺陷.提出了改善轧件表面和心部质量的措施.经轧制实验验证,楔横轧成形小断面收缩率轴类零件是可行的.