Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

Existence of two solutions of m-point boundary value problem for second order dynamic equations on time scales

In this paper, by means of a new twin fixed-point theorem in a cone, the existence of at least two positive solutions of m-point boundary value problem for second order dynamic equations on time scales is considered.     

Depth profile analysis of polyimide film treated by potassium hydroxide

The structural change in the depth direction of a polyimide (UPILEX‐S) film treated in alkaline solution, which was a representative surface treatment used to form a seed layer for plating and to improve the adhesive strength, was analyzed by means of micro Fourier transform infrared attenuated total reflection (FTIR‐ATR) line analysis with gradient shaving preparation. The polyimide film was treated with KOH. The imide ring opened through the alkaline treatment, and the amide structure and carboxylic acid salt were formed. The attainment depth of this structural change was almost proportional to the treatment time, and it reached about 8 μm after a 30‐min treatment. The degree of structural change through the alkaline treatment was almost constant after it reached a considerably degraded stage, and the chemically changed region penetrated into the inner part of the film from the surface. An intermediate layer before the final degraded stage appeared in the treated layer, and its thickness increased with the treatment time. The region that was changed chemically by the alkaline treatment progressed to the inner part simultaneously and continuously as the treatment time increased. The combined use of gradient shaving preparation and micro FTIR‐ATR line analysis was found to be extremely effective for the depth profiling of organic materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2071–2078, 2003     

标度系统一致性矩阵容量的计算方法

本文研究正互反矩阵的变换性质 ,提出一种保持正互反矩阵一致性程度的等价分类 ,为计算各种标度系统下的一致矩阵容量提供了计算方法     

小型企业规模的有效性分析

在当代企业纷纷追求规模的不断扩大的同时，统计数据却显示企业平均规模不断下降的事实趋势。论根据数学、经济学与博弈论的有关理论对企业规模小型化的内在要求进行了探讨，分析的结论一致证明：粘型化规模在当代经济环境中是充分有效的。     

石灰石闪蒸改性及脱硫性能的试验研究

本文对3种不同产地的石灰石进行了闪蒸改性处理,对改性石灰石颗粒的孔径分布进行了测定,研究了压力、温度等参数对石灰石闪蒸改性的影响。并在气流反应器上对闪蒸后的样品进行了硫化试验。结果表明,在一定的压力和温度下,闪蒸处理能够增大石灰石颗粒的微孔孔径,并使石灰石样品的脱硫性能得到较大提高。     

Preparation of Phosphoric-Carboxylic Cation Exchangers from Wood Cellulose

Phosphorus-containing cellulose cation exchangers were synthesized by reaction of wood cellulose with orthophosphoric acid and the ternary polymer from glycidylmethacrylate, styrene, and maleic anhydride. The effects of the ratio of reactants, temperature, and duration of the reaction on the phosphorylation and exchange capacity of the modified cellulose material were studied.     

僧帽牡蛎碱性磷酸酶功能基团的研究

采用化学修饰法研究僧帽牡蛎碱性磷酸酶活性功能基团性质.酶经0.4mmol·L-1PCMB修饰30min后活力仍然保持不变,提示巯基与酶的活力无关;用二巯基苏糖醇(DTT)对酶进行修饰,当DTT浓度达到2.5mmol·L-1时,酶活力丧失98%,表明硫 硫键与酶活力有密切的关系;以N 溴代琥珀酰亚胺(NBS)修饰酶的色氨酸残基,酶的修饰失活呈一级反应,当NBS浓度达到0.65mmol·L-1时,酶活力丧失100%,并辅以紫外吸收光谱的变化分析,表明色氨酸残基是酶催化活力所必需的;醋酸酐、马来酸酐、甲醛等氨基试剂对酶的修饰作用显示氨基是酶的必需基团.     

钙和钡对钢脱氧及夹杂变性的理论分析

在比较了各种常用脱氧剂单质脱氧能力的基础上，对钙合金、钡合金夹杂的变性能力进行了理论分析和探讨，并对钡合金的脱氧和夹杂物变性工艺提出了建议。     

Decentralized iterative learning control for a class of large scale interconnected dynamical systems

The problem of decentralized iterative learning control for a class of large scale interconnected dynamical systems is considered. In this paper, it is assumed that the considered large scale dynamical systems are linear time-varying, and the interconnections between each subsystem are unknown. For such a class of uncertain large scale interconnected dynamical systems, a method is presented whereby a class of decentralized local iterative learning control schemes is constructed. It is also shown that under some given conditions, the constructed decentralized local iterative learning controllers can guarantee the asymptotic convergence of the local output error between the given desired local output and the actual local output of each subsystem through the iterative learning process. Finally, as a numerical example, the system coupled by two inverted pendulums is given to illustrate the application of the proposed decentralized iterative learning control schemes.