Structural and thermal characterization of sugarcane bagasse phthalates prepared with ultrasound irradiation

Chemical modification of sugarcane bagasse was achieved by esterification with phthalic anhydride in pyridine after ultrasound irradiation. The parameters including ultrasonic irradiation time 0-40 min, phthalic anhydride dosage 2.5-7.5 g, reaction time 30-150 min, and reaction temperature 80-115 °C were optimised and the extent of phthalation was measured by weight percent gain. It was found that degradation of the cell wall polymers occurred at higher temperature (>90 °C) under the experimental conditions used.FT-IR and CP/MAS ¹³C NMR spectroscopy studies also clearly produced evidence for phthalation reaction. The phthalated bagasse preparations showed decreased thermal stability after chemical modification.     

Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3

CaCO₃/PEEK (poly-ether ether ketone) composites were prepared on a twin-screw extruder with different mass ratio of CaCO₃/PEEK from 0% to 30%. Four types of particles were used as filler in PEEK matrix. The influence of surface treatment with sulfonated PEEK (SPEEK) of the particles on the mechanical and thermal properties of the composites was studied. The experiments included tensile tests, flexural tests, notched Izod impact tests, TGA, DSC and SEM. The modulus and yield stress of the composites increased with CaCO₃ particles loadings. This increase was attributed to the bonding between the particles and the PEEK matrix, as can be proved by the SEM pictures of tensile fracture surface of the composites. The impact strength of the composites was modified by the SPEEK coated on the CaCO₃ particle surface. DSC experiments showed that the particle content and surface properties influenced the glass transition temperature (T_g) and melting temperature (T_m) of the composites. The T_g increased with the content of fillers while T_m decreased. In this study the fillers treated were found to give better combination properties, which indicated that SPEEK played a constructive role in the CaCO₃/PEEK composites.     

阳离子改性HZSM-5沸石上低碳醇反应历程的TPSR-MS研究

用ＴＰＳＲ－ＭＳ技术研究了Ｃｕ，Ｚｎ和Ｇａ改性Ｈ－ＺＳＭ－５沸石的活性中心性质及Ｃ１～Ｃ４醇的反应历程。结果表明，Ｚｎ－和Ｇａ－ＺＳＭ－５有两种芳构化活性中心，即Ｂ酸和Ｚｎ，Ｇａ活性物种；甲醇在Ｃｕ－ＺＳＭ－５上只生成二甲醚、ＣＯ和ＣＯ２，而在Ｚｎ－ＺＳＭ－５上芳构化反应历程为：（１）醇经由醚脱水生成烯烃，Ｃ２～Ｃ４醇学可单分子脱水生成烯烃；（２）烯烃中间物齐聚，齐聚物通过氢转移和脱氢途径环化、芳     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

An effective cross-linking of polymer layer on monodisperse, poly(maleic anhydride-styrene)-modified colloidal silica particles and properties of the composite

Summary  The cross-linkings of the surface polymer layer on mono disperse, poly(maleic anhydride-styrene)-modified silica particles by the reaction with diisocyanate were studied. The extent of cross-linking was estimated by the weight decrease by immersing the particles in the buffer solution of pH 2.0, 4.0 and 9.0 at a room temperature for 24 h. The reaction of the polymer-modified silica with 1,6-diisocyanatohexane afforded relatively stable composite particles which lost less than 5 wt% of the polymer in aqueous solution in the pH range 2.0–9.0. The diisocyanate was a preferable cross-linker to 2,4-diisocyanatotoluene in terms of stability in acidic or basic aqueous solution. The flexibility of the cross-linker molecule possibly plays an important role in the cross-linking reaction. The carboxyl and amino groups were formed by treating the cross-linked composite particles with diluted HCl solution; 5–6 and 0.5–1.1 μmol g^-1, respectively. The cross-linked composite particles exhibited the characteristic property of ζ-potential, −44 to −47 mV and −102 to −107 mV in a neutral aqueous solution and ethanol, respectively. Received: 26 May 1997 Accepted: 4 August 1997     

The theory of non-Cottrellian diffusion on the surface of a sphere or truncated sphere.

A method is developed whereby spherical and other particles can be derivatised with electroactive species on their surface and then immobilised on the surface of an electrode. The chronoamperometric and voltammetric responses in the limit of reversible electrode kinetics are modelled using a theory of charge movement over the surface of the spheres where this movement is considered as a diffusional process. The model is extended to include different distributions of sphere radii and to model the scenario of truncated spheres resting on the electrode surface. It is found that a good estimation of the truncation angle can be found by fitting the experimental data with theoretical predictions.     

Optimisation of physical and mechanical properties of rubber compounds by response surface methodology--Two component modelling using vegetable oil and carbon black

Response surface methodology was used for predicting the optimal composition of vegetable oil and carbon black in rubber compounding. Central composite rotatable design for two variables at five levels was chosen as the experimental design. The data obtained from measurement of properties was fitted as a two variable second order equation and were plotted as contour plots using programme developed in MATLAB v.5. It is observed from the contour plots that the increase in cross-link density caused by the formation of rubber mono-layer from its multi-layer on increasing the carbon black loading upto the central point (50 phr) of experimental region increases 300% modulus and elongation at break and reduces the ultimate properties like tear strength and tensile strength. On the other-hand hardness increases with increase in solid inclusion of carbon black. From the contours it is observed that the addition of vegetable oil upto 2-3 phr, cross-link density increases due to its coupling action leading to increase in hardness and modulus and lowering of ultimate properties like tensile strength and elongation at break. Addition of further amount of vegetable oil shows less coupling and more plasticising effect leading to increase in tear strength, tensile strength and elongation at break and decrease in hardness and 300% modulus.     

Surface Modification of Nitrile Rubber by Plasma Polymerization

Radio frequency plasma polymerization of vinylidene fluoride was used to modify the surface properties of nitrile rubber. The chemistry and frictional properties of the plasma films were characterized. FTIR transmission spectra and EDX analysis of plasma polymer films deposited on NaCl windows showed that the degree of fluorination of the plasma polymers increased as plasma power was increased from 25 to 50 W, and then decreased monotonically at higher powers. An estimation of the actual F/C ratio from EDX data indicated that the plasma polymer films contained approximately one fluorine atom for every 2–5 carbon atoms. Sliding friction tests on a Delrin countersurface showed that the coefficient of friction of the plasma treated rubbers was lower than untreated rubber, but slighly higher than rubber coated with silicone oil. Repetitive sliding friction testing showed that silicone oil treated samples had a longer lubricating lifetime than plasma treated samples. However, cyclic friction tests conducted with nitrile rubber o-rings yielded similar frictional behavior and lubricating lifetimes for silicone oil and plasma treatments. There was no correlation between chemical composition and the frictional and wear properties of the plasma films. Environmental scanning electron micrographs showed that the plasma films were brittle and tended to crack and flake off during wear testing.     

On the surface modification of microchannels for microcapillary electrophoresis chips

This paper presents systematic investigation of the microchannel surface properties in microCE chips. Three popular materials for microCE chips, polydimethylsiloxane (PDMS), quartz, and glass, are used. The zeta potentials of these microchannels are calculated by measuring the EOF velocity to evaluate the surface properties after surface modification. The hydrophobic PDMS is usually plasma-treated for microCE applications. In this study, a new method using a high-throughput atmospheric plasma generator is adopted to treat the PDMS surface under atmospheric conditions. In this approach, the cost and time for surface treatment can be significantly reduced compared with the conventional vacuum plasma generator method. Experimental results indicate that new functional groups could be formed on the PDMS surface after treatment, resulting in a change in the surface property. The time-dependent surface property of the plasma-treated PDMS is then measured in terms of the zeta potential. Results show that the surface property will reach a stable condition after 1 h of plasma treatment. For glass CE chips, two new methods for changing the microchannel surface properties are developed. Instead of using complicated and time-consuming chemical silanization procedures for CE channel surface modification, two simple and reliable methods utilizing organic-based spin-on-glass and water-soluble acrylic resin are reported. The proposed method provides a fast batch process for controlling the surface properties of glass-based CE channels. The proposed methods are evaluated using PhiX-174 DNA maker separation. The experimental data show that the surface property is modified and separation efficiency greatly improved. In addition, the long-term stability of both coatings is verified in this study. The methods proposed in this study show potential as an excellent solution for glass-based microCE chip surface modification.     

Determination of Lead, Chromium, Manganese and Zinc in Slurries of Botanical and Biological Samples by Electrothermal Atomic Absorption Spectrometry Using Tungsten-Containing Chemical Modifiers

Lead, Cr, Mn and Zn in slurries of botanic and biological samples were determined by electrothermal atomic absorption spectrometry (ETAAS) using W, Ir, NH₄H₂PO₄, W and NH₄H₂PO₄, Ir and NH₄H₂PO₄, W and Ir, and W + Ir + NH₄H₂PO₄ chemical modifiers in an 0.2% (v/v) Triton X-100 plus 0.2% (v/v) nitric acid mixture. Zeeman effect background correction was performed and platforms inserted into graphite tubes were used. Comprehensive comparative studies were carried out with respect to pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, detection limits and accuracy of the determinations in the presence and absence of modifiers. The mixture of W + Ir + NH₄H₂PO₄ was found to be preferable for the determination of Pb, Cr, Mn and Zn in slurry samples. The pyrolysis temperatures of the analytes were increased up to 1250 °C for Pb, 1000 °C for Zn, 1400 °C for Cr and Mn by using W + Ir + NH₄H₂PO₄ with an 0.2% (v/v) Triton X-100 plus 0.2% (v/v) nitric acid mixture used as diluent solution. The optimum masses of the mixed modifier components were found to be 20 µg W + 4 µg Ir + 50 µg NH₄H₂PO₄. The characteristic masses of Pb, Cr, Mn and Zn obtained are 16.3, 5.6, 0.1 and 1.1 pg, respectively. The detection limits of Pb, Cr, Mn and Zn based on integrated absorbance for 0.5% (m v⁻¹) slurries were found to be 0.14, 0.06, 0.02 and 0.01 µg g⁻¹, respectively. The slurries of botanic and biological certified and standard reference materials were analyzed with and without the modifiers. Depending on the sample type, the percent recoveries increased from 63 up to 104% for analytes when using the proposed modifier mixture.