Existence of a solution for a Signorini contact problem for Maxwell-Norton materials

The aim of this article is to study the quasistatic evolutionof a Maxwell–Norton three-dimensional viscoelastic solidwith contact constraints. After introducing the appropiate functionalframework, we will discretize the problem in time using an implicitscheme whose resultant variational inequality is well posed.By using monotonicity arguments together with compensated compactnesstechniques, we will prove that the corresponding discrete solutionconverges to a solution of the continuous problem.     

Adhesion studies of latex film surfaces on the meso- and nanoscale

In this paper the effects of surface roughness and annealing temperature (T) of latex coating films on adhesion are discussed for the different stages of the film formation process. The surface free energy of latex films was assessed in terms of practical work of adhesion (W) (or adherence) using a custom-built adhesion-testing device (ATD), atomic force microscopy (AFM), and contact angle measurements. For preannealed latex films surface roughness averages (R_a) were determined from AFM height images and were related to the values of W obtained from ATD measurements at room temperature. The results obtained using these tests exhibiting surface behavior on different length scales indicate a dependence of the measured adhesion on surface roughness and temperature, as well as on the length scale of the measurements.First preannealed samples were studied, which were obtained by heat treatment above the respective glass transition temperatures (T_g). Increasing the temperature of preannealing resulted in a decrease of the adherence observed in ATD experiments at room temperature. However, on the nanoscale, using AFM, no significant variation of the adherence was observed. This observation can be explained by roughness arguments. Preannealing decreases roughness which results in lower adherence values measured by ATD while for essentially single asperity AFM experiments roughness has an insignificant effect. Specimens were also annealed over a constant period of time (90 min) at different temperatures. At the end of the heat treatment, adhesion was measured at the treatment temperature by ATD. The amplified effect of temperature observed in this case on adherence is attributed to the combination of roughness decrease and increasing test temperature. In a third set of experiments completely annealed samples were studied by ATD as well as by AFM as a function of temperature. With increasing T values ATD showed a decrease in adherence, which is attributed to a decreasing surface free energy of the annealed films at elevated T values. AFM, on the other hand, showed an opposite trend which is assigned to increasing penetration of the tip into the tip/wetting polymer samples versus increasing temperature. Finally, annealing isotherms as a function of time were investigated by ATD in situ at different temperatures. This last set of experiments allowed us to optimize annealing time and temperature to achieve complete curing.     

随机环境下的对称零程过程的大偏差原理

利用相对熵方法及鞅方法给出了随机环境下的对称零程过程的经验测度的收敛速度函数.     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

低温固体界面间接触导热“hysteresis”现象的研究

文中以强化低温固体界面间的接触导热为出发点 ,实验测定了低温环境下两种金属界面在过度加载前后的接触热导值 ,指出过度加载是一种经济有效的强化导热方法 ,对卸载过程接触热导率大于同次加载过程接触热导的“hysteresis”现象产生机理进行了分析     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

The Newton filtration and d-determination of bifurcation problems related to C~0 contact equivalence

In this paper, from the Newton filtration's point of view, we construct the singular Riemannian metric and use the method in singular theory to study the bifurcation problems, and give the sufficient condition of d-determination of bifurcation problems with respect to C0 contact equivalence. The special cases of the main result in this paper are the results of Sun Weizhi and Zou Jiancheng.     

Solutions in Sobolev spaces of vector refinement equations with a general dilation matrix

In this paper, we present a necessary and sufficient condition for the existence of solutions in a Sobolev space W_p^k(ℝ^s) (1≤p≤∞) to a vector refinement equation with a general dilation matrix. The criterion is constructive and can be implemented. Rate of convergence of vector cascade algorithms in a Sobolev space W_p^k(ℝ^s) will be investigated. When the dilation matrix is isotropic, a characterization will be given for the L_p (1≤p≤∞) critical smoothness exponent of a refinable function vector without the assumption of stability on the refinable function vector. As a consequence, we show that if a compactly supported function vector φ∈L_p(ℝ^s) (φ∈C(ℝ^s) when p=∞) satisfies a refinement equation with a finitely supported matrix mask, then all the components of φ must belong to a Lipschitz space Lip(ν,L_p(ℝ^s)) for some ν>0. This paper generalizes the results in R.Q. Jia, K.S. Lau and D.X. Zhou (J. Fourier Anal. Appl. 7 (2001) 143–167) in the univariate setting to the multivariate setting. Dedicated to Professor Charles A. Micchelli on the occasion of his 60th birthday Mathematics subject classifications (2000) 42C20, 41A25, 39B12. Research was supported in part by the Natural Sciences and Engineering Research Council of Canada (NSERC Canada) under Grant G121210654.     

Tunneling Radiation of a Torus-Like Black Hole in Anti-de Sitter Space-Time

An extension of the Parikh-Wilczek's semi-classical quantum tunneling method, the tunneling radiation of the charged particle from a torus-like black hole is investigated. Difference from the uncharged mass-less particle, the geodesics of the charged massive particle tunneling from the black hole is not light-like, but determined by the phase velocity. The derived result shows that the tunneling rate depends on the emitted particle's energy and electric charge, and takes the same functional form as uncharged particle. It proves also that the exact emission spectrum is not strictly pure thermal, but is consistent with the underlying unitary theory. PACS Numbers: 04.70.Dy, 97.60.Lf, 05.30.Ch.