Al/Al2O3P金属基复合材料的静动态压缩性能及损伤分析

用气压浸渗工艺制备了体积分数40％～50％Al2O3颗粒增强纯铝基复合材料，使用了4种不同尺寸的Al2O3颗粒，其平均粒径分别为5μm、10μm、30μm和60μm．测定了这些复合材料的静、动态压缩性能，并通过材料压缩前后密度变化的测量定量表征了材料的累计损伤，结果表明，与基体材料相似，这些复合材料表现出明显的应变率敏感性；当增强颗粒平均粒径小于60μm时，材料的累计损伤基本与应变率无关，而主要取决于材料的应变．材料中颗粒的破裂主要是由颗粒间的相互作用引起的．较小尺寸颗粒增强的复合材料具有较高的流动应力和较小的累计损伤，并随着颗粒体积分数的增加，材料的流动应力和损伤率都相应增加．     

非线性生育率阶段结构的收获模型

建立并分析了一类非线性生育率阶段结构的单种群的收获模型，得到了正平衡点全局稳定的条件，给出了最优收获策略．     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

Synthesis and antibody conjugation of magnetic nanoparticles with improved specific power absorption rates for alternating magnetic field cancer therapy

Bionized nanoferrite (BNF) particles with high specific power absorption rates were synthesized in the size range of 20–100 nm by high-pressure homogenization for targeted cancer therapy with alternating magnetic fields. Several strategies were used to conjugate antibodies to the BNF particles. These strategies were compared using an immunoassay to find optimal conditions to reach a high immunoreactivity of the final antibody–particle conjugate.     

Asymptotic Methods Applied to Contact Problems

Asymptotic methods for contact problems are expounded. Some typical integral equations are considered     

债券的利率敏感性测量

基于中国债券市场研究了固定利率和浮动利率债券的利率敏感性度量 :久期和凸性 .     

产品销售相关环境下的提成率研究

以往多产品销售的最优提成率研究多基于多产品销售相互独立的假设之上。本文将一种多产品销售的合同模型拓展到产品销售相互影响的环境中,对不同的销售相关性情况下销售提成率的设置进行了分析,推出了不同情况下各产品提成率之间的关系特点和指导性结论。最后研究了当厂商兼顾短期利润和长期利润时对主副产品销售提成率的影响,提出了根据产品所处生命周期的不同阶段,用价值权重向量来动态调整、优化负责销售主、副产品的销售人员薪酬合同参数设计的方法。     

A combined programming and iteration algorithm for finite element analysis of three-dimensional contact problems

Comparing with two-dimensional contact problems, three-dimensional frictional contact problems are more difficult to deal with, because of the unknown slip direction of the tangential force and enormous computing time. In order to overcome these difficulties, a combined PQP (Parametric Quadratic Programming) and iteration method is derived in this paper. The iteration algorithm, which alleviates the difficulty of unknown slip direction, is used along with the PQP method to cut down computing costs. Numerical example is given to demonstrate the validity of the present algorithm. The project supported by the Machinary and Electronics Ministry of China     

浅析篮球运动员的快速能力

快速能力是篮球运动员的最基础的竞技能力 ,因此 ,培养训练篮球运动员的快速能力是非常重要的 .快速能力主要包括 :移动速率 ;反应、判断力 ;果断性、合理性 ;攻守转换的速度等 .在训练中 ,应根据球队队员的特点进行 ,做到个性与共性的有机结合 ,使其得到最大限度的提高     

碰壁分子的平均速率和平均能量

本文对气体系统内的碰壁分子的平均速率和平均能量为会么会大于系统内分子的平均速率和平均能量进行了定性解释，并求出了这两类不同平均值之间的一般关系，最后针对经典理想气体算出了定量结构。