Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

Investigation of the detection limit for the determination,by pyrolysis-capillary GC,of the thickness of ultra thin PMMA layers coated on to PET film

The determination of nanometer thick layers of poly(methyl methacrylate) coated on to the surface of poly(ethylene terephthalate) film has been investigated by high resolution pyrolysis gas chromatography without sample pretreatment or modification of the instrumentation used. A good linear relationship was observed between the quantity of the characteristic pyrolysate and the thickness of the poly(methyl methacrylate) layer; the detection limit was sufficient to enable the quantitation of poly(methyl methacrylate)-to-poly(ethylene terephthalate) film thickness ratios of 1:20000 in composite materials.     

Spectroscopic Interrogation of Layer-by-layer Assembled Films of Conjugated Polyelectrolytes

Layer-by-layer fluorescent conjugated polyelectrolyte films have been studied. The photoluminescence of conjugate polyelectrolytes was observed to be highly tunable during this film assembly process. Efficient photoinduced electron transfer from thus prepared highly luminescent film to a natural electron-transfer protein cytochrome c has also been observed.     

[Co（H2o）4（NCS）2]（18—C—6）的薄层光谱电化学研究

利用光谱电化学方法来研究冠醚类化合物的文章尚未见报导.本文在测定用凝胶法合成的[Co(H_2O)(NCS)_2](18-C-6)的核磁共振谱和红外光谱的基础上,使用循环伏安法和薄层光谱电化学技术,在金微栅电极上测定了此配合物在乙腈溶剂中的第一步克式量电势(E~0′)和电子转移数(n),并推测了电还原反应机理.     

Stainless steel capillary columns for high temperature gas chromatography

A layer of elemental silicon has been deposited on the surface of stainless steel tubing by means of chemical vapor deposition (CVD). Two kinds of capillary column were prepared from the deactivated tubing: cross-linked, silanol-terminated polydime-thylsiloxane wall coated open tubular (WCOT) columns and molecular sieve 13X porous layer open tubular (PLOT) columns. Unlike fused silica capillary columns, stainless steel WCOT and PLOT columns can be operated at temperatures in excess of 400°C. High temperature simulated distillation has been performed successfully with a macro bore WCOT column and rapid PNA (paraffin, naphthene, and aromatic) analysis with a multidimensional gas solid chromatographic (GSC) system using PLOT columns.     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

砂卵石地层盾构隧道掌子面稳定性理论分析

盾构隧道穿越砂卵石地层掘进施工时,由于砂卵石的地层特性及施工扰动,隧道掌子面容易失稳而引发事故。为研究砂卵石地层盾构隧道掌子面稳定所需的最小支护力,结合砂卵石地层的掌子面失稳模式,在三维Murayama模型的基础上,将掌子面前方土体的滑动面形式假设为对数螺旋滑移线,结合上部松动区域的破坏机制,引入椭球体放矿理论,对传统的棱柱体筒仓模型进行改进,进一步通过极限平衡法推导出砂卵石地层的掌子面极限支护力求解公式;最后通过离散元数值模拟验证所推公式,两者的误差为3.1%。结果表明所得公式可对砂卵石地层的掌子面极限支护力进行较为精确的求解。研究成果以期为砂卵石地层掌子面极限支护力计算理论提供依据。     

边界层对粗糙单裂隙溶质运移影响试验

为探究非费克(non-Fickian)运移表现出的峰值提前到达和拖尾等现象,开展了粗糙单裂隙溶质运移试验,总结了粗糙单裂隙中溶质运移特征及运移机理,结合边界层理论对峰值提前到达和拖尾现象进行了分析和解释。结果表明：峰值时间和拖尾时间与边界层厚度之间存在较好的线性相关关系;边界层对裂隙介质溶质运移有较为显著影响,即水流速度越小,边界层厚度越大,滞留在边界层内部的溶质越多,溶质获取率越低;粗糙单裂隙中溶质穿透曲线的峰值提前和拖尾现象是由裂隙中心处以惯性力主导的主流区和裂隙壁面以黏性力主导的边界层区共同作用造成的,其中峰值时间主要由主流区的对流因素控制,而边界层区域的存在对拖尾时间影响较大。     

带背景激波系的凹腔流动特性研究

凹腔作为超燃冲压发动机的一种火焰稳定器受到广泛关注,凹腔剪切层与背景激波系的相互作用影响凹腔火焰稳定器的性能。为深入分析背景激波系对凹腔流动的影响,设计了长深比为13.3的闭式凹腔,将凹腔模型前缘激波和风洞上壁面干扰激波作为背景激波系,在Ma=2的直连式风洞中开展了背景激波系与凹腔剪切层的相互作用的试验,采用高速纹影系统对瞬态流场进行了捕捉,重点关注背景激波系和凹腔剪切层的动态变化特性。采用纹影序列的本征正交分解来研究流场中的主要相干结构,采用快速傅里叶变换和连续小波变换对流场的频率域特征进行了分析。结果表明：在背景激波与剪切层相互作用下,激波结构产生大尺度振荡,凹腔内流动结构产生小尺度脉动。通过对激波位置的傅里叶变换分析,发现激波振荡的主导频率集中在90～400 Hz的范围内。通过对纹影图像的空间傅里叶变换分析,发现5 kHz以下的流场振荡主要由激波振荡引起,5 kHz以上的流场脉动主要由凹腔内流动结构引起。     

Lamination Design Optimization for Continuous Fiber Reinforced Composites of Variable Thicknesses北大核心CSCD

由于具备高的比强度、比刚度,利用连续纤维增强复合材料代替传统金属材料以实现结构轻量化正受到设计者们的广泛关注。然而,结构的复杂性给复合材料的铺层设计与优化带来了很大的挑战。针对航空用复合材料铺层设计约束多的问题,通过逐步构建设计变量准确表达结构的铺层信息。基于经典遗传算法框架,结合各设计变量特点,定义了铺层优化算法中的遗传算子,通过引入“修复”策略保证了每一代解都能满足设计约束,分布在可行域区间内。最后利用精英保留策略提高了算法的局部寻优能力,可以降低复杂复合材料结构铺层设计的计算成本。通过解决经典benchmark问题并与已有优化结果的比较,验证了前述铺层优化算法的全局、局部寻优能力,为工程实际中的复合材料铺层设计优化提供了理论支撑。