聚醚聚酯嵌段共聚物共混物表面组成的ESCA研究

<正> 关于生物医用材料的微多相分离结构和适宜的亲、疏水性同它血液相容性间关系的研究已有不少文献报道。由于材料在使用时真正同血液相接触的只是材料的表面部分,因此材料的表面组成、结构和性质对它的血液相容性就具有更为直接的关系。对聚醚     

Determination of residual levels of unsaturation in partially hydrogenated poly(2,3-diphenyl-1,3-butadiene) using TG

The thermal degradation characteristics of head-to-head poly(styrene) [HHPS] should provide insight with respect to the impact of head-to-head placement on the thermal stability of traditional atactic head-to-tail polymer [HTPS]. The synthesis of head-to-head poly(styrene) must be accomplished indirectly. The head-to-head polymer is most satisfactorily obtained by dissolving metal reduction of poly(2,3-diphenyl-1,3-butadiene) [PDBD] generated by radical polymerization of the corresponding diene monomer. Full saturation of the polymer mainchain requires several iterations of the reduction procedure. Since the decomposition of poly(2,3-diphenyl-1,3-butadiene) is prominent at 374°C and that for head-to-head poly(styrene) is similarly facile at 406°C, it seemed feasible that TG of partially hydrogenated PDBD might be utilized as a convenient means of monitoring the extent of hydrogenation. This has been demonstrated for various levels of unsaturation remaining - from approximately 90 to less than 10%. Within this range the peak areas from the DTG plots of the partially hydrogenated polymer provide a good reflection of the ratio of unsaturated to saturated units in the polymer. Even low levels of unsaturation in the polymer may be detected by the asymmetry of the decomposition peak for the polymer. This revised version was published online in August 2006 with corrections to the Cover Date.     

Chloro(η6‐p‐cymene)(phosphoramidite)ruthenium(II), a 16‐Electron Fragment Stabilized by an η2‐Aryl–Metal Interaction,and Its Use in Asymmetric Cyclopropanation

Chloride abstraction from the half‐sandwich complexes [RuCl₂(η⁶‐p‐cymene)(P*‐κP)] ( 2a : P* = (S_a,R,R)‐ 1a = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐1‐phenylethyl)]phosphoramidite; 2b : P* = (S_a,R,R)‐ 1b = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐(1‐(1‐naphthalen‐1‐yl)ethyl]phosphoramidite) with (Et₃O)[PF₆] or Tl[PF₆] gives the cationic, 18‐electron complexes dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐phenyl]ethyl}[(1R)‐1‐phenylethyl]phosphoramidite‐κP}ruthenium(II) hexafluorophosphate ( 3a ) and [Ru(S)]‐dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐naphthalen‐1‐yl]ethyl}[(1R)‐1‐(naphthalen‐1‐yl)ethyl]phosphoramidite‐κP)ruthenium(II) hexafluorophosphate ( 3b ), which feature the η²‐coordination of one aryl substituent of the phosphoramidite ligand, as indicated by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy and confirmed by an X‐ray study of 3b . Additionally, the dissociation of p‐cymene from 2a and 3a gives dichloro{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐(1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP)ruthenium(II) ( 4a ) and di‐μ‐chlorobis{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP}diruthenium(II) bis(hexafluorophosphate) ( 5a ), respectively, in which one phenyl group of the N‐substituents is η⁶‐coordinated to the Ru‐center. Complexes 3a and 3b catalyze the asymmetric cyclopropanation of α‐methylstyrene with ethyl diazoacetate with up to 86 and 87% ee for the cis‐ and the trans‐isomers, respectively.     

Simultaneous determination of bromide and iodide ions by capillary isotachophoresis using quaternary ammonium salts

Bromide and iodide ions were determined simultaneously by capillary isotachophoresis using an aqueous electrolyte system; the separation principle was based on the ion-pairing equilibria between tetradecyldimethylbenzylammonium ion and these anions in the leading electrolyte. The interaction between iodide ion and tetradecyldimethylbenzylammonium ion was stronger than that for bromide ion. Thus complete separation of bromide and iodide ions could be obtained by using a leading electrolyte containing 1.5 mM tetradecyldimethylbenzylammonium ion. The pH of the leading electrolyte was adjusted to 5.0. The relative standard deviations of the zone length for bromide and iodide ions were 1.1 and 1.2%, respectively, when mixture of 3.0 mM of these ions was analysed. A 150-μl volume could be injected for the simultaneous determination of low concentrations of bromide and iodide ions.     

锂离子电池高比容量FeSn2-C复合负极材料的合成与性能

Sn基合金负极材料具有高达990 mAh·g^-1的理论比容量,但其也存在因脱嵌锂过程发生巨大的体积变化而导致循环性能较差的问题. 本文以Sn、Fe、石墨为原料利用简易的高能球磨法成功制备了具有核壳结构的FeSn₂-C复合物,系统研究了球磨时间、FeSn₂相含量对材料物相结构及电化学性能的影响,并分析了电极的失效机理. 研究表明,球磨时间的增加有利于FeSn₂金属间化合物相的形成及材料颗粒的细化,进而有利于材料比容量的增加及循环性能的提升;FeSn₂相含量的增加能够提高FeSn₂-C材料的比容量,但会降低FeSn₂-C电极的循环稳定性. 经工艺优化及组分调节,球磨24 h合成的Sn₂₀Fe₁₀C₇₀材料具有最优的电化学性能,材料的比容量在540 mAh·g^-1左右,并能稳定循环100次,是一种非常有发展前途的锂离子电池高比容量负极材料.     

Multilayer adsorption with variable thickness at solid-liquid interfaces

 The multilayer adsorption on the solid/liquid interface in binary mixtures was studied by adsorption space filling with constant and variable layer thickness. Adsorption from benzene/n-heptane mixtures was examined on hydrophilic and hydro-phobic surfaces. The free enthalpy of adsorption, Δ₂₁ G=f (x ₁), was calculated from the adsorption excess isotherm by integration of the Gibbs equation. Supposing that the free enthalpy is mainly due to adsorption in the first layer, the composition of this layer can be calculated from the Δ₂₁ G=f (x ₁) function. It was established that the adsorption layer thickness in benzene/heptane mixtures increases significantly with increasing benzene content. This statement was supported by X-ray diffraction on hydrophobic clay minerals. Received: 2 April 1997 Accepted: 10 June 1997     

Optical resolution of new quinolone drugs by capillary electrophoresis with ligand-exchange and host-guest interactions

A method for the optical resolution of new quinolone drugs (NQs) by capillary electrophoresis has been investigated. The NQs were adequately resolved using a γ-cyclodextrin (γ-CD)-Zn(II)- -phenylalanine ( -Phe) solution as the running solution. The resolution depended on the components of the running solution and their concentrations. When -Phe was used instead of -Phe, inversion of the migration order of the enantiomers was observed. The resolution mechanism is considered to be due to a ligand-exchange interaction of the NQs with Zn(II) and -Phe, in combination with a host-guest interaction of those with γ-CD.     

Synthesis of cationic complexes [(C<Subscript>4</Subscript>Me<Subscript>4</Subscript>)CoL]<Superscript>+</Superscript> (L is naphthalene,phenanthrene, and anthracene)

Cationic arene complexes [Cb*Co(naphthalene)]⁺ (2, Cb* = C₄Me₄) and [Cb*Co(phenanthrene)]⁺ were synthesized by the reactions of [Cb*Co(MeCN)₃]⁺ with arenes. The [Cb*Co(anthracene)]⁺ complex was synthesized by the abstraction of the iodide ion from [Cb*CoI]₂ by TIBF₄ in the presence of anthracene. Complex 2 exchanges the naphthalene ligand for other arenes at room temperature. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1861–1863, September, 2007.     

Preparation and Characterization of a Sol-Gel Prepared Ferroelectric Sandwich Structure

A novel silicon-based PbTiO₃/Pb(Zr,Ti)O₃/PbTiO₃ (PT/PZT/PT) sandwich structure has been prepared using a sol-gel method. The annealing temperature is greatly reduced compared with those structures without PT layers. Capacitance-voltage (C-V), leakage current-voltage (I-V), polarization-field (P-E), dielectric-frequency response and polarization fatigue of the sandwich structure are examined. The relative dielectric constant, the coercive field and the remanent polarization of the PZT films are measured to be about 900, 18 kV/cm and 16 C/cm² respectively. The current density is less than 5 × 10^–9 A/cm² below 200 kV/cm. The dielectric constant of the structure remains constant at low frequency, and decreases to some degree at high frequency. The retained polarization does not change significantly after 8 × 10⁹ read/write cycles. The PZT films are proved to have very good dielectric and ferroelectric properties. The new PT/PZT/PT sandwich structure can be valuable for memory devices and other applications.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.