扰动模糊集的粗糙度

首先,将扰动模糊集和粗糙集理论相结合,提出了粗糙扰动模糊集的概念并研究了其基本性质.接着,通过引进扰动模糊集水平上、下边界区域的概念,克服了粗糙集理论中普遍存在的两个集合的上近似的交不等于两个集合的交的上近似(两个集合的下近似的并不等于两个集合的并的下近似)的缺陷.最后,定义了依参数的扰动模糊集的粗糙度的定义,讨论了其基本性质.     

表面粗糙度对玻璃钢材料放气速率影响的试验研究

设计了一套基于压差流量法的试验装置来测量不同表面粗糙度玻璃钢试样的放气速率;采用两种砂纸(100#和500#)打磨而得到两种不同表面粗糙度玻璃钢试样;采用扫描探针显微镜对试样表面粗糙度进行测量,测量了不同表面粗糙度试样在不同温度下的放气速率。试验结果表明:测量室温度越高,玻璃钢试样的放气速率越大;试样的表面粗糙度越大,其放气速率越大。     

微磨具磨削钠钙玻璃的磨损机理实验研究

建立了微磨削过程中单颗磨粒的磨损数学模型,通过观测微磨具磨削前后直径变化、表面形貌变化及加工前后试件的表面质量,分析了微磨削过程中不同阶段磨粒的磨损情况.利用粒度500~#微磨具对钠钙玻璃进行单因素磨损实验,研究不同的磨削影响因素对微磨具磨损的影响规律.实验结果表明:随着磨削速度和进给速度增大,磨粒的磨损和破碎现象加剧;随着去除材料体积的增加,微磨具直径先是急剧减小,而后呈线性减小趋势;加工表面的粗糙度随着去除工件体积的增加总体呈下降趋势.研究结果为提高微磨具的使用寿命和加工性能提供了理论参考和实验依据.     

一种利用霍尔效应测量螺线磁场的新方法

给出了一种利用霍尔效应测量螺线管磁场的新方法：用数字电压表取代电位差计等诸多仪器测量霍尔电热差，进而计算出通电长直螺线管内轴向磁场的分布，实验证明，该方法测量精度高、稳定性好，克服了以往测量方法的缺点，极大地提高了实验精度和实验效率。     

A computer program for automated step edge motion analysis from scanning probe microscopy images

A computer algorithm was developed to automatically track the displacement of straight step edges between sequential scanning probe microscopy images of single-crystal surfaces. The program utilizes the Canny edge detection algorithm followed by the Hough Transform of the edge map to identify step edges according to their direction, relative to the image axes, and according to their displacement, relative to the image origin. The tracking of individual steps is facilitated by the fact that straight edges in general maintain their direction and therefore, steps of similar displacement but different direction can be sorted. The algorithm is based on the assumption that the rate of image acquisition is much greater than the rate of (mono)layer growth/dissolution, requiring that changes in step displacement are small in successive images. The change in step displacement in sequential images leads directly to the calculation of the step speed. By tabulating all changes in step displacement through a sequence of images, a statistical representation of the step edge data is produced. The program was evaluated using a sequence of 20 atomic force microscopy images from a calcite (104) surface growing from a supersaturated aqueous solution. The program required, in total, 5 CPU-minutes running on a Pentium 4 processor to compute the mean step speed with 60% precision whereas the equivalent number of measurements performed “by hand” required 6 person-hours at 70% precision. For comparable output, the computer program therefore represents a factor of about 100 decrease in required effort.     

Nanoclusters of TiO2 wetted with gold

We combined scanning tunneling microscopy and density functional theory to establish the structure-functionality relationship for nanometer-sized defects on TiO₂(1 1 0). Three-angstrom high topographically distinct dots are ascribed to stoichiometric TiO₂ nanoclusters with low coordination numbers. The under-coordinated O atoms of the nanocluster, with surface O atoms, provide exceptionally strong binding sites for Au nanoparticles. Our atomistic model elucidates a number of characteristics salient to low temperature CO oxidation by Au nanoparticles.     

Anomalous scaling in surface roughness evaluation of electrodeposited nanocrystalline Pt thin films

Atomic force microscopy (AFM) is used to measure the surface roughness of crystalline Pt thin films as a function of film thickness and growth rate. Our films were electrodeposited on Au/Cr/glass substrates, under galvanostatic control (constant current density), from a single electrolyte containing Pt⁴⁺ ions. Crystalline structure of the films was confirmed by X-ray diffraction (XRD) technique. The effect of growth rate (deposition current density) and film thickness (deposition time) on the kinetic roughening of the films were studied using AFM and roughness calculation. The data is consistent with a rather complex behaviour known as “anomalous scaling” where both local and large scale roughnesses show power law dependence on the film thickness.     

中外女子3000m障碍跑成绩发展态势分析

采用数理统计的方法对近10年世界女子3000m障碍跑的成绩变化特征及其原因进行分析，并运用数学建模的方法对世界女子3000m障碍跑发展态势进行了预测，从而为提高我国女子3000m障碍跑运动技术水平提供理论与实践依据．     

固体热导率测量仪的新发现

实验通过稳态法使用TC-3型固体热导率测定仪[1,9]的测量方法改变来测量海洋大气热导率,结构简单,误差更小,一机多用.通过改变加热铜盘A与散热铜盘B之间的距离,探究距离对大气热导率的影响,并与教材中介绍的气体热导率测定仪测量的大气热导率进行比较.