双船联合举升多体协同作业系统横摇稳性评估

基于ADAMS平台,构建特定场景双船联合举升多体协同作业系统虚拟样机,对新型一体化拆解作业双船联合举升过程中待拆除组块横摇稳性进行预测与评估。构建了该系统拓扑模型,使用几何参数描述系统中上部组块横摇运动特征;通过虚拟样机仿真探究了双船不同耦合运动情况时上部组块最危险失稳状态,并分析了上部组块重心至连接点连线垂直距离与水平距离比值对横摇角度的影响规律。结果表明:物理模型试验数据驱动的虚拟样机技术可以有效评估该系统运动特征,与几何拓扑模型得到的上部组块横摇失稳角度理论公式计算结果吻合;双船同相位横摇与反相位垂荡耦合运动时对上部组块横摇稳性影响最大;待拆除上部组块横摇失稳时的极限纵横比可以作为复杂多体系统横摇稳性评估参数,为实际工程方案选择提供参考。     

轧制带材的瓢曲生成路径

通过建立冷轧带材屈曲失稳后的大位移变形模型,计算出复杂模态的瓢曲浪形生成路径,它包含着实际可能出现的各种附加应力和位移约束条件．实验证明这是可行的板形控制目标理论,解决了高技术轧机的板形设定问题．     

冷带轧机液压厚控系统动态数学模型分析与测试

分析了液压厚度控制系统动态数学模型．并与频率特性测试仪所测结果做了比较．得出了实用的被控对象结构图．为厚度控制系统的设计提供了理论依据．     

神经网络多参数诊断法

讨论了机械故障诊断中采用多参数诊断法的必要性,阐述了神经网络理论用于多参数诊断的理论依据,归纳了神经网络多参数诊断法的实施步骤,并以滚动轴承故障诊断为例,对该方法进行了实验验证,证明了该方法的实用性。     

制浆造纸企业管控一体化系统的层次分析

以制浆造纸企业管理与控制系统秋实际背景,运用ＡＨＰ原理,探讨了企业多目标、多层次 管控一体化系统的递阶结构。依次分析了战略性决策层、战术性决策层、作业管理层和生产控制层各层次内部的纵向组成结构和横向关联结构,以及各层次之间的相互关联。由此提出了企业管控一体化系统的理论构架和管理／控制原理。本研究结果对其他企业的管控一体化系统的研究亦有参考意义。     

“S”形刃球头立铣刀的研究（Ⅰ）──数学模型

在分析球头立铣刀刃磨方法的基础上,建立了“Ｓ”形刃球头立铣刀前、后刀面以及切削刃的数学模型．模型的建立对“Ｓ”形刃球头立铣刀几何参数的分析及优化、切削机理的研究、刃磨参数的选择以及刃磨装置的设计都将具有理论意义;对加快“Ｓ”形刃球头立铣刀的国产化制造具有实用价值．     

同时快速更换轧辊和导卫的高刚度机座

提出了一种可同时快速更换轧辊和导卫装置的高刚度轧机机座,适用于棒材、线材和型材轧制．该机座在机架上安装一个称为卡式箱的装置,卡式箱内可以预装轧辊和导卫,并在轧制线外调整好,可以实现轧辊和导卫一次吊装,快速更换．     

Formation of MoS2 inorganic fullerenes (IFs) by the reaction of MoO3 nanobelts and S

The reaction of MoO3 and S at temperatures higher than 300 degrees C in an argon atmosphere provides a convenient and effective method for the synthesis of MoS2 nanocrystalline substances. MoS2 nanotubes and fullerene-like nanoparticles have been obtained by the reaction at 850 degrees C under well-controlled conditions. The influences of reaction temperature and duration were carefully investigated in this paper. All of the nanostructures were characterized by Xray powder diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). A stepwise reaction model and rolling mechanism were proposed based on the experimental results.     

Development of a laccase-based flow injection electrochemical biosensor for the determination of phenolic compounds and its application for monitoring remediation of Kraft E1 paper mill effluent

This paper describes the development of a new system for amperometric determination of phenolic compounds, and its application for monitoring these compounds in paper mill effluent. The method was based on a flow system, a dialysis sampler, and a laccase-based biosensor. The performance of this system was investigated with respect to pH, ionic strength, working potential, and flow-rate dependence. The biosensor showed an excellent long-term stability allowing measurements for over than 3 months. The sensitivity of laccase-based biosensor was tested for phenol, p-chlorophenol, guaiacol and chloroguaiacol; the detector presented selective measurements of micromolar concentration of these compounds. The integration of a dialysis membrane sampling in the system protected the biosensor surface from fouling and gave independence of sample conditions that commonly influence the biosensor performance. These favorable characteristics allowed its application for direct measurements in complex media with no sample pretreatment. This ability was confirmed employing this system in a continuous analysis of phenolic compounds during the remediation of paper mill effluent by ozonization process.     

两流方式下薄板坯连铸连轧生产组织方法及仿真

针对薄板坯连铸连轧两流供料方式下生产组织中出现的新问题,提出两种生产计划组织方式,建立模型进行仿真分析.根据仿真分析结果对薄板坯连铸连轧的生产组织方式选择提出建议.