席夫碱自组装单分子膜的电化学行为

利用自组装技术将席夫碱硫醇衍生物在金表面形成自组装单分子膜,并初步研究了此自组装单分子膜的电化学行为,发现该席夫碱分子在0.1 mol•L－1的KCl溶液中具有电化学不可逆氧化还原行为，且随着自组装时间的增加表观电极反应速率常数值显著减小,最后减小为0,并对此进行了解释.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

Kinetics and mechanism in the decomposition of NH3 in a radio-frequency pulse discharge

Studies of time-resolved absorption spectra of transient species in the decomposition of NH₃ by an r.f. pulse discharge together with product analysis showed that the major radical formed was NH at concentrations of the order of 10^–6 mol dm^–3 (10⁵ molec. cm^–3). Possible mechanisms for the formation of the radical during the discharge and its decay following pulse cut-off were tested by computer simulation of the kinetic data. Following zero-order formation with rate coefficient 0.19±0.03 mol dm^–3 s^–1, the decay was second order in NH with rate coefficient 2.1±0.5×10⁹ mol^–1 dm³ s^–1 both for pure NH₃ and where NH₃/rare gas mixtures were investigated. The kinetic data are consistent with NH removal in a nonassociative radical-radical reaction proceeding via a short-lived collision complex, probably 2NH N₂H₂ N₂ + H₂.     

Influence of the particle size distribution on the CRTA curves for the solid-state reactions of interface shrinkage type

The kinetic curves at infinite temperature for the solid-state reactions of the interface shrinkage type were drawn theoretically by taking account the particle size distribution in the sample mixture. The CRTA curves for the reactions with the particle size distribution can be drawn by utilizing the universal kinetic curves at infinite temperature. The proper kinetic treatment for the CRTA curves with the particle size distribution is discussed in connection with the property of the kinetic equation with respect to the particle size distribution. The present kinetic consideration is taken as a simulation for the reactions with a certain distribution in among the reactant particles, produced preferably by the mass and heat transfer phenomena during the thermoanalytical measurements. The merit of the rate jump method by a single cyclic CRTA curve is also discussed on the basis of the present results.     

Hydrolysis of 1,2-disubstituted imidazolines in aqueous media

The kinetics of hydrolysis of 1,2-disubstituted imidazolines in aqueous media was studied (pH 2.0—12.5, T = 25—90 °C) by UV spectroscopy. The hydrolysis products were identified. The introduction of a branched substituent into position 2 of the imidazoline ring increases the hydrolytic stability of the compounds. The effect of the pH on the hydrolysis rate of imidazolines is discussed.     

单向应力条件下松弛时间率相关的非线性粘弹性本构模型

基于单向拉伸实验研究和内变量理论 ,提出了一种新的简单的一维非线性粘弹性本构关系 .对两种粘弹性材料 ,即高密度聚乙烯和聚丙烯进行了不同加载速率作用下的拉伸实验研究 ,实验结果表明 ,两种材料的应力应变关系与加载速率相关 ;对材料的应力应变实验数据进行拟合发现 ,材料的松弛时间具有很强的应变率相关性 ,当应变率发生数量级变化时 ,材料的松弛时间也发生数量级的变化 .采用内变量理论 ,导出了在单轴应力条件下松弛时间率相关的非线性粘弹性本构关系的迭代形式 ,并给出其收敛条件 .当采取一次迭代形式时 ,本构关系退化为松弛时间率相关的Maxwell模型 .数值拟合的结果表明 ,一次迭代形式的本构关系就可以很好地拟合和预测实验结果 .     

超临界萃取装置的研制及其应用

超临界流体萃取是近的上来兴起的一种新的分离技术，报道了将超临界萃取原理与回流技术相结合研制的二氧化碳回流中低压超临界流体萃取设备，解决了关键实验手段，通过应用证明设备可靠，费用低廉，有实用价值。     

Theoretical Studies on the Abstraction Reaction of Atomic O（^3p） with Si2H6

The hydrogen abstraction reaction of O(^3P) with Si2H6 has been studied theoretially. Two transition states of ^3A″ and ^3A′ symmetries have been located for this abstraction reaction. Geometries have been optimized at the UMP2 leve with 6-311G (d) basis set. G3MP2 has been used for the final single-point energy calculation. The rate constants have been calculated over a wide temperature range of 200-3000K using canonical variational transition-state sheory (CVT) with small curvature tunneling effect(SCT). The calculated CVT/SCT rate constants match well with the experimental value.     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Influence of heating rate on kinetic quantities of solid phase thermal decomposition

Thermogravimetric analyses of thermal decomposition (pyrolysis, thermal dissociation and combustion) of 9 different samples were carried out in dynamic conditions at different heating rates. The kinetic parameters (E, A and k_m) of thermal decomposition were determined and interrelations between the parameters and heating rate q were analyzed. There were also relations between Arrhenius and Eyring equations analyzed for thermal decomposition of solid phase. It was concluded that Eyring theory is an element, which interconnects used thermokinetic equations containing Arrhenius law and suggests considering kinetic quantities in way relative to 3 kinetic constants (E, A and k_m). Analysis of quantities other than km (i.e. E, A, Δ⁺H, Δ⁺S) in relation to heating rate is an incomplete method and does not lead to unambiguous conclusions. It was ascertained that in ideal case, assuming constant values of kinetic parameters (E and A) towards heating rate and satisfying both Kissinger equations, reaction rate constant k_m should take on values intermediate between constants (k_m)₁ and (k_m)₂ determined from these equations. Whereas behavior of parameters E and A towards q were not subjected to any rule, then plotting relation k_m vs. q in the background of (k_m)₁ and (k_m)₂ made possible classification of differences between thermal decomposition processes taking place in oxidizing and oxygen-free atmosphere.