Physical and chemical properties of a durably efficacious ammonium bicarbonate as a fertilizer and its yield-increasing mechanism

A new fertilizer of cocrystal type,known as durably efficacious ammonium bicarbonate (DEAB),has been developed by adding a certain amount of dicyandiamide (DCD) as an ammonia-stabilizing agent to ammonium bearbenate(AB)during the process of its production.As compared with AB,DEAB was found to have a reduction of direct volatilization loss by 53%,a fertilizer availability period prolonged from 35-45 to 90-110 d,and an increase in the rate of nitrogen in fertilizer being utilized by 5.9%-10.2%,and a saving of the amount of fertilizer to be ap-phed by 20%-30% for the same level of yield,or an increase of the crop yield by over 10% for the same level of ni-tregen fertilization;in addition,it was found to show usually a function of promoting the crop to early mature.It can be apptied as basal dressing all in one time to soil and thus also used as a labour-saving and crop yield-increasing fertil-izer for is non-mtertillage,plastics film covering and water-saving agriculture     

Halogenated arenes in the Duff reaction at high pressures

The reaction of fluorobenzene with urotropine in trifluoroacetic acid (TFAA) at high pressures and temperatures affords predominantly fluorobenzaldehydes andN-(fluorophenylmethyl)trifluoroacetamides. The yields of these products depend considerably on the reaction conditions. The rates of their formation have the maximum values at the momemt of the phase transition (PT) of TFAA. A new efficient cyclic (dynamic) regime is proposed for the synthesis at high pressures. The regime involves periodically occurring PT of the solvent. The change in the relative rate of product formation with the degree of fluorobenzene conversion is wave-like.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 319–323, February, 1995.     

钴(II)-联吡啶-α-氨基酸的热力学和动力学研究

关于联吡啶为第一配体的二元、三元配合物的热力学和动力学性质的研究,以铜（Ⅱ）作为中心离子最为多见,而以钴（Ⅱ）作为中心离子的报导较少．实验表明,过渡金属钻（Ⅱ）能与大多数的生物配体、大π共轭体系形成相当稳定的二元、三元配合物,是生物功能模拟的一个具有应用价值的中心离子·钴（Ⅱ）卟啉可以代替铁（Ⅱ）卟啉,模拟血红蛋白、肌红蛋白[1],在生物体内起到输送氧的作用．为了充分了解钴（Ⅱ）与生物配体的配伍能力、配位方式以及其配位过程的动态行为,为推动钴（Ⅱ）配合物及其生物功能的模拟研究,本文分别采用PH电位法…     

束-气条件下He(23S)与CH3Cl及CH3I的传能研究

在束-气条件下，通过检测产物的化学发光，研究了亚稳电子激发态He（23S）原子与CH3Cl、CH3I传能反应.采用参比反应的方法，测得了由上述反应产生的主要碎片CH（A2△）、CH（B2∑-）、CH（C2∑+）和H*形成速率常数．通过对测得的CH（A2△－X2∏r）和CH（B2∑-－X2∏r）色散谱进行计算机模拟，获得了初生态的CH（A2△，v＝0－2）和CH（B2∑-，v＝0态）的振动-转动布居，实验结果表明，CH（A2△，v＝0）态的转动布居是呈双Boltzman分布的，并且反应的可资用能大部分将转变成产物的平动能．根据实验结果和反应阈能的分析，本文对He（23S）与CH3Cl／CH3I传能反应机理进行了探讨。     

A quality systems approach for identifying and controlling sources of error with point of care testing devices

Historically, due to the size and nature of the instrumentation, highly skilled laboratory professionals performed clinical testing in centralized laboratories. Today’s clinicians demand realtime test data at the point of care. This has led to a new generation of compact, portable instruments permitting ”laboratory” testing to be performed at or near the patient’s bedside by nonlaboratory workers who are unfamiliar with testing practices. Poorly controlled testing processes leading to poor quality test results are an insidious problem facing point of care testing today. Manufacturers are addressing this issue through instrument design. Providers of clinical test results, regardless of location, working with manufacturers and regulators must create and manage complete test systems that eliminate or minimize sources of error. The National Committee for Clinical Laboratory Standards (NCCLS) in its EP18 guideline, ”Quality management for unit-use testing,” has developed a quality management system approach specifically for test devices used for point of care testing (POCT). Simply stated, EP18 utilizes a ”sources of error” matrix to identify and address potential errors that can impact the test result. The key is the quality systems approach where all stakeholders – professionals, manufacturers and regulators – collaboratively seek ways to manage errors and ensure quality. We illustrate the use of one quality systems approach, EP18, as a means to advance the quality of test results at point of care. Received: 26 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium Abbreviations NCCLS National Committee for Clinical Laboratory Standards (formerly) · POCT point of care testing · QC quality control · HACCP hazard analysis critical control points · CLIA clinical laboratory improvement amendments (of 1988) Correspondence to S. S. Ehrmeyer     

Investigation of the Electrochemical Reduction of Benzophenone in Aprotic Solvents Using the Method of Cyclic Voltammetry

The reduction of benzophenone (Bzph) in 3-pentanone (PEN), acetone (ACE), N,N-dimethylacetamide (DMA), N,N-dimethylformamide (DMF), tetrahydrofuran (THF), acetonitrile (ACN) and dimethyl sulfoxide (DMSO) with n-tetrabutylammonium hexafluorophosphate (TBAPF₆) as background electrolyte was studied using the technique of cyclic voltammetry at the temperature of 263.15 K. The half-wave potentials (E _1/2) were extracted. The reduction of Bzph occurs in two successive one-electron steps to produce first the free radical anion Bzph⁻ and then the dianion Bzph²⁻. The results indicated that the radical anion Bzph⁻ is reoxidized to Bzph in all investigated solvent media whereas the dianion Bzph²⁻ is reoxidized to Bzph⁻ only in THF. The heterogeneous electron-transfer rate constants (k _s ) were evaluated by employing the electrochemical rate equation proposed by Nicholson. The rate of electron transfer for the Bzph/Bzph⁻ couple was found to be relatively slow in all investigated solvent media. Consequently, the electron-transfer processes can be recognized as quasi-reversible. The diffusion coefficients (D) of Bzph in the investigated solvent media have been calculated using the modified Randles-Sevcik equation. The effect of the physical and chemical properties of the solvent medium on the electrochemical behavior of Bzph has been examined.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Ab initio quantum chemical studies of the reactions of CF3CFHO2 with HO2

The potential energy surface (PES) for the CF₃CFHO₂+HO₂ reaction has been theoretically investigated using the DFT [B3LYP/6‐311G(d,p)] and B3LYP/6‐311++G(3df,3pd)//B3LYP/6‐311G(d,p) levels of theory. Both singlet and triplet PESs are investigated. The reaction mechanism on the triplet surface is simple. It is revealed that the formation of CF₃CFHOOH+³O₂ is the dominant channel on the triplet surface. On the basis of the ab initio data, the total rate constants for the reaction CF₃CFHO₂+HO₂ in the T = 210–500 K range have been computed using conventional transition state theory with Wigner's tunneling correction and have been fitted by a rate constant expression as k = 1.04 ×10^?12(cm³ molecule^?1 s^?1) exp (700.33/T). Calculated transition state rate constants with Wigner's tunneling correction for the reaction CF₃CFHO₂+HO₂ are in good agreement with the available experimental values. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Evaluation of thermodynamic properties of irreversible protein thermal unfolding measured by DSC

Summary We assessed the applicability of the extrapolation procedure at infinite scanning rate to differential scanning calorimetry (DSC) data related to irreversible protein unfolding. To this aim, an array of DSC curves have been simulated on the basis of the Lumry-Eyring model N↔U→F. The results obtained confirmed that when the apparent equilibrium constant K_{app (T=T1/2)} is lower than 3, the application of the extrapolation procedure provides accurate thermodynamic parameters. Although this procedure applies only to monomeric proteins for which the Lumry-Eyring model is a reasonable approximation, it will hopefully contribute to increase the potential of DSC in obtaining reliable thermodynamic information regarding the folding/unfolding equilibrium.     

Kinetics and mechanisms in carbocationic polymerization: The quest for true rate constants

This article is a critical analysis of kinetic dataavailable on carbocationic polymerizations. A survey of published propagation rate constant (k_p) data revealed several orders of magnitude differences. In this article, an explanation of this apparent discrepancy is offered with a case study involving the carbocationic polymerization of 2,4,6‐trimethylstyrene (TMS). With the polymerization mechanism originally proposed for this system, k_p = 1.35 × 10⁴ L mol^?1 s^?1 was extracted from experimental data with the Predici polyreaction package. The alternative mechanism yielded k_p = 1.01 × 10⁷ L mol^?1 s^?1, close to that predicted by Mayr's Linear Free Energy Relationship (LFER). We propose that true rate constants can only be obtained from direct competition experiments or from kinetic interpretation based on independently proven mechanisms. The second part of this review discusses critical analysis of the temperature and concentration dependence of various living IB systems. Comparison of the temperature dependence in systems initiated with 2‐ chloro‐2,4, 4‐ trimethylpentane (TMPCl)/TiCl₄ from various laboratories yielded of ΔH ～?25 and ?34.5 kJ/mol for high and low TMPCl/TiCl₄ ratios, respectively. Aromatic (cumyl‐type) initiators show ΔH ～ ?40 kJ/mol, whereas H₂O/TiCl₄ in the presence of the strong electron‐ pair donor dimethylacetamide gave ΔH = ?12 kJ/mol. The significant differences indicate different underlying mechanisms with complex elementary reactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5394–5413, 2005