医用硬性内窥镜畸变的评定基础和方法

建立医用硬性内窥镜畸变的评定基础和方法,用视轴对称的球面Z视场为模型来模拟体腔凹面特征,以建立内窥镜物像共轭的分析基础;运用光学原理并结合ISO9039:1994“光学和光学仪器光学系统质量评价———畸变的测定”的定义原则,并根据理论畸变的临床要求确定畸变定义;采用主光线追迹原理推导不同球面Z形状的畸变换算通式。创立了医用硬性内窥镜以单位相对畸变表述的定义和表达式,并导出变换视场面的畸变换算通用公式和测试方法。本文建立的畸变评定基础和方法适用于医用硬性内窥镜的标准应用。     

滚摆运动的研究

从实验和理论上研究了滚摆的运动,得到了滚摆滚动最大高度和滚动时间随滚动次数的变化关系。揭示了空气阻力及摆线间摩擦力等因素对滚摆运动的影响及其引起的系统机械能损失。     

用补充法测物体的转动惯量

三线摆是研究转动惯量平行轴定理的重要仪器之一。在测量中使用传统方法用三线摆测量物体转动惯量时误差往往过大。而用补充法将两物体分别置于三线摆下摆盘的上下，使两物体的整体重心在下摆盘上，从而大大降低误差。     

U形拱棚配锚索在盘区巷道支护中的应用

通过对大同煤矿集团公司雁崖矿14#层414盘区巷道变形、破坏机理的分析和研究,根据锚索和U型钢支架对巷道的不同支护原理,充分利用锚索的高预应力和U型钢棚的可缩性的优点,"抗、让"结合,既有效控制了顶板离层,又利用u型钢棚的可缩性对围岩应力卸载,提高了巷道稳定性,在实际应用中取得成功.     

刃型位错和圆弧形刚性线夹杂的干涉效应

位错和夹杂的干涉效应对于理解材料的强化和韧化机理具有十分重要的意义。文中研究了晶体材料中刃型位错和多条共圆弧刚性线夹杂的干涉作用。利用Riemann—Schwarz反照原理和复势函数的奇性主部分析技术，得到了问题的一般解答；对于只含一条刚性线夹杂的情况，给出了复势函数的封闭形式解。由Peach-Koehler公式求出了作用在刃型位错上的位错力，并讨论了圆弧形刚性线夹杂对位错力的影响规律，发现弧形刚性线对刃型位错有很强的排斥作用。本文解答不但可作为格林函数获得任意分布位错的相应解答，而且可以用于研究刚性线夹杂和任意形状裂纹的干涉效应问题。     

新光大桥的动力特性和地震行波效应研究

新光大桥位于广州新光快速路主干线,是世界上第一座三跨连续钢桁拱与钢筋混凝土V型刚构结合的钢-混凝土组合体系桥梁,主桥跨度为177 428 177 m,在目前同类型桥梁中,主桥长度位居世界第一.该桥结构新颖,造型独特.文章主要针对新光大桥的动力特性和地震行波效应进行了详细研究.在两水准、两阶段抗震设防思想下给出了主要控制构件在考虑行波效应情况下的内力,并与纵桥向地震一致激励作用下的内力进行了比较;同时给出了在不同剪切波速下,主拱顶截面的位移时程曲线.研究表明行波效应以及地面剪切波速度对大跨度连续刚架钢桁拱桥的地震响应有着较大的影响.     

固壁近旁Stokes流中粘性液滴的运动和变形

发展了一种模拟固壁近旁轴对称Stokes流中粘性液滴的运动和变形及直接计算固壁上应力的边界积分方法．用此方法对不同的液滴-固壁初始相对间距、粘度比、表面张力和浮力联合参数以及环境流动参数情况进行了数值实验．数值结果显示,由于环境流动和浮力的作用,随着时间的推进,液滴在轴向压缩,在径向拉伸．当环境流动的作用弱于浮力作用时,随着时间的推移,液滴上升并向上弯,固壁上由液滴运动所引起的应力不断减小．当环境流动的作用强于浮力作用时,随着时间的推移,液滴变得越来越扁．在这种情形,当大初始间距时,壁面上的应力随液滴的演变而增大;当小初始间距时,由环境流动、浮力及壁面对流动的较强作用的联合影响,此应力随液滴的演变而减小．由于液滴运动所引起的壁面应力的有效作用仅限于对称轴附近的一个小范围内,且此范围随液滴与固壁的初始间距增大而增大．应力的大小随初始间距增大而大为减小．表面张力对液滴变形有阻止作用．液滴粘性会减小液滴的变形和位置迁移．     

Studying the Suitability of Nineteen Lignins as Partial Polyol Replacement in Rigid Polyurethane/Polyisocyanurate Foam

In this study, nineteen unmodified lignins from various sources (hardwood, softwood, wheat straw, and corn stover) and isolation processes (kraft, soda, organosolv, sulfite, and enzymatic hydrolysis) were used to replace 30 wt.% of petroleum-based polyol in rigid polyurethane/polyisocyanurate (PUR/PIR) foam formulations. Lignin samples were characterized by measuring their ash content, hydroxyl content (Phosphorus Nuclear Magnetic Resonance Spectroscopy), impurities (Inductively Coupled Plasma), and pH. After foam formulation, properties of lignin-based foams were evaluated and compared with a control foam (with no lignin) via cell morphology, closed-cell content, compression strength, apparent density, thermal conductivity, and color analysis. Lignin-based foams passed all measured standard specifications required by ASTM International C1029-15 for type 1 rigid insulation foams, except for three foams. These three foams had poor compressive strengths, significantly larger cell sizes, darker color, lower closed-cell contents, and slower foaming times. The foam made with corn stover enzymatic hydrolysis lignin showed no significant difference from the control foam in terms of compressive strength and outperformed all other lignin-based foams due to its higher aliphatic and p-hydroxyphenyl hydroxyl contents. Lignin-based foams that passed all required performance testing were made with lignins having higher pH, potassium, sodium, calcium, magnesium, and aliphatic/p-hydroxyphenyl hydroxyl group contents than those that failed.     

Phase‐separated,conducting composites from polyaniline and benzobisthiazole rigid‐rod polymer

As an alternative method for processing polyaniline (PANI) from its conducting (protonated) state, vacuum casting of PANI from a methanesulfonic acid (MSA) solution provided films with electrical conductivity values of about 130–150 S/cm. In addition, we similarly prepared blended films of PANI · MSA and poly(p‐phenylene benzobisthiazole) (PBZT). This process eliminated the need for a subsequent protonation step and had the additional advantage that the conjugated PBZT may provide alternative conducting pathways. Conductivity values of the composite films ranged from 100 pS/cm to 124 S/cm, and the films displayed critical concentration behavior with a PANI threshold concentration of 2.75% and a critical exponent of 4. Transmission electron micrographs displayed phase‐separated regions with PANI forming a continuous network at high concentrations. Thermogravimetric analysis results demonstrated the thermal and thermooxidative stability advantage of the blends due to the PBZT component. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2539–2548, 2001