Time saving fluid dynamic predictions in a wetting-drying process: A hypothesis for vertisols

This paper is aimed at investigating the effect of the initial water content in a vertisol sample on the whole wetting-drying process leading the system to a change in volume. In order to do this, an experimental setup was realized and employed with very thin soil layers wetted from below (“per ascensum”). The results show that the effect of the initial water content on the swelling-shrinkage process is to shift the corresponding curve e-ϑ towards bigger-smaller values of the humidity but does not seem to affect the dynamics of the process. The text was submitted by the authors in English.     

慢速饮酒血液中酒精含量的数学模型

描述的是在一定时间内慢慢地匀速喝完一定数量酒的问题,并建立了相应的数学模型.同时也建立了快速饮酒的数学模型,以及证明了在各次饮酒后的某时刻酒精含量的可叠加性.     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.     

Photon interaction studies using 241Am γ-rays

We have carried out some photon interaction measurements using 59.54 keV γ-rays from a ²⁴¹Am source. These include γ attenuation studies as well as photoelectric absorption studies in various samples. The attenuation studies have been made using leaf and wood samples, samples like sand, sugar etc., which contain particles of varying sizes as well as pellets and aqueous solutions of rare earth compounds. In the case of the leaf and wood samples, we have used the γ-ray attenuation technique for the determination of the water content in fresh and dried samples. The variation of the attenuation coefficient with particle size has been investigated for sand and sugar samples. The attenuation studies as well as the photoelectric studies in the case of rare earth elements have been carried out on samples containing such elements whose K-absorption edge energies lie below and close to the γ-energy used. Suitable compounds of the rare earth elements have been chosen as mixture absorbers in these investigations. A narrow beam good geometry set-up was used for the attenuation measurements. A well-shielded scattering geometry was used for the photoelectric measurements. The mixture rule was invoked to extract the values of the mass attenuation coefficients for the elements from those of the corresponding compounds. The results are consistent with theoretical values derived from the XCOM package.     

Dispersion relations and the spin polarizabilities of the nucleon

A forward dispersion calculation is implemented for the spin polarizabilities γ₁,,γ₄ of the proton and the neutron. These polarizabilities are related to the spin structure of the nucleon at low energies and are structure-constants of the Compton scattering amplitude at . In the absence of a direct experimental measurement of these quantities, a dispersion calculation serves the purpose of constraining the model building, and of comparing with recent calculations in heavy baryon chiral perturbation theory.     

饱和水蒸汽与水的焓与熵参数的新关联式

饱和水蒸汽与水的焓与熵参数的新关联式李斯特，马润梅，吴冷（北京化工大学机械工程系北京１０００２９）关键词统计力学，剩余函数，焓与熵１引言本文根据统计力学与热力学剩余函数原理，结合本课题组曾已建立的饱和水蒸汽与水的新简明状态方程模型，经推导出一则适合于...     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

An investigation of finite-size scaling for systems with long-range interaction: The spherical model

A method is suggested for the derivation of finite-size corrections in the thermodynamic functions of systems with pair interaction potential decaying at large distancesr asr ^{–d –} , whered is the space dimensionality and>0. It allows for a unified treatment of short-range (=2) and long-range (<2) interaction. The asymptotic analysis is illustrated by the mean spherical model of general geometryL ^d–d× ^d subject to periodic boundary conditions. The Fisher-Privman equation of state is generalized to arbitrary real values ofd, 0d. It is shown that the-expansion may be used to study the breakdown of standard finite-size scaling at the borderline dimensionalities.     

A Monte Carlo method for an objective Bayesian procedure

This paper describes a method for an objective selection of the optimal prior distribution, or for adjusting its hyper-parameter, among the competing priors for a variety of Bayesian models. In order to implement this method, the integration of very high dimensional functions is required to get the normalizing constants of the posterior and even of the prior distribution. The logarithm of the high dimensional integral is reduced to the one-dimensional integration of a cerain function with respect to the scalar parameter over the range of the unit interval. Having decided the prior, the Bayes estimate or the posterior mean is used mainly here in addition to the posterior mode. All of these are based on the simulation of Gibbs distributions such as Metropolis' Monte Carlo algorithm. The improvement of the integration's accuracy is substantial in comparison with the conventional crude Monte Carlo integration. In the present method, we have essentially no practical restrictions in modeling the prior and the likelihood. Illustrative artificial data of the lattice system are given to show the practicability of the present procedure.