彩色电视机遥控电源电路分析

本文从彩色电视机中遥控电路电源与整机主电源之间的关系出发,介绍了遥控电路电源的主要类型,并进行了可靠性分析。     

海底电缆铺设系统中监控软件及通讯系统的设计研究

介绍了微机实时监控系统中主机与多台可编程控制器间一种可靠的数据方案,讨论了其通讯接口、通讯格格式和通讯软件,并设计了实时监控软件,该系统具有结构简单,调试方便、工作可靠等优点,已在现场成功应用。     

油田采油泵站自动监测系统

针对目前油田的实际情况,利用MCS-51系列单片机构成了油田采油泵站自动监测系统,该系统由监测总站监测分站组成。总站与分站之间的信息传递采用无线通讯方式。由于构成该系统的核心部件MCS-51系列单片机性能优越,且具有多机通讯功能,故该系统具有高可靠性和高性能价格比。     

矿山排水泵站微机通信测控系统

针对目前平庄矿务局元宝山露 天矿的实际情况,利用ＭＣＳ－９６系列单片机成了矿山排水泵站微机通信测控系统。该系统由调度端和终端站组成,调度端与终端站之间的信息伟递采用无线通讯方式。且具有多机通信功能,故系统具有高可靠性和高性能价格比。     

同相水深-辐射关系率定

介绍了水体同相的概念,利用水体地质、地貌、沉积和水文等条件确定水体同相的方法,以及在水体同相前提下建立水深－辐射关系的实用性,并提出了利用稳定水下地形且测深资料的水域进行水深－辐射关系借地率定的新思路,探索了利用卫星遥感测量水下地形的新方法,该方法弥补了以往遥感测深需要低含沙的清澈水体的缺陷。     

水文自动测报系统的体系结构研究

研究了水文自动测报系统的层次和借分和网络互连。在此基础上,仿照“物理构成”和“逻辑构成”分开的原则,建立了多媒体通信网络的水文自动测报系统的“逻辑构成”体系结构。即多媒体通信网络化的水文自动测报系统的体系结构参考模式,简称ＨＤＡＳ－ＲＭ。     

多媒体通信是信息时代的一大技术特征

本文就几年来从事图象与多媒体通信技术研究开发的经历,首先回顾了近二十年来信息技术的进程及不同阶段发展的主要标志,从信息化社会开始进入多媒体时代的高度比较规范和系统地介绍了多媒体及多媒体通信概念、关键技术及其发展动态和社会应用前景。其中涉及从事国家高科技规划＂８６３＂项目研究及其主要成果的内容概括,企图对读者系统了解多媒体通信及其时代意义有所帮助。     

14N遥测核四极共振中的偏离共振效应

本文对遥测NQR谱中的偏离共振效应作了较详细地研究,发现¹⁴N谱线的强度随偏离共振效应而变化。当偏离共振强度与射频场强度接近时,测得的谱线强度最大。该效应可用来增强¹⁴N遥测NQR谱仪的灵敏度。上述实验现象在理论上采用脉冲的激发带宽方法作了解释和讨论。     

A Siloxane Homopolymer with Interacting Ferrocenes as a New Material for the Preparation of Sensors Based on the Detection of Hydrogen Peroxide

The electrochemical characterization of a hydrogen peroxide sensor based on a ferrocene‐containing polymer electrochemically deposited onto a platinum electrode is described. The redox polymer consists of a siloxane‐based homopolymer, with pendant electronically communicated ferrocenyl moieties. The electrodes were used as the transducer for glucose and lactate‐sensing enzyme sensors. Amperometric biosensors were prepared by immobilization of glucose oxidase (Gox) or lactate oxidase (Lox) onto these modified electrodes. The steady‐state amperometric response of the sensors is investigated as a function of the applied potential and substrate concentration. Interferences, sensitivity and stability of the sensors were also studied.     

Quantitative Comparison Between Vacuum-Ultraviolet Irradiation and Remote Hydrogen Plasma Treatment of Hydrocarbon Polymers

The photon flux of vacuum ultraviolet (VUV) and ultraviolet (UV) radiation of a hydrogen plasma with and without a MgF₂window was recorded by fluorescence measurements of sodium salicylate layers. After the compensation of the MgF₂absorption by increasing the input power into the plasma source, a comparison between afterglow hydrogen plasma and VUV treatments was made. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were treated either with VUV radiation or with remote hydrogen plasma and mass loss and CH absorption loss were measured by a quartz crystal microbalance and by infrared reflection absorption spectroscopy, respectively. In the case of PE the effects of both treatments were found to be very similar white for PP slight differences were observed. For the actual set of experimental conditions, the radiation component is largely responsible for the efficiency of the plasma treatment. VUV and remote hydrogen plasma treatments of PS showed only a negligible loss of mass and CH absorption.