室温离子液体自组装金纳米粒子模板化制备内消旋多孔材料增强细胞色素c直接电化学（英文）

室温离子液体作为一种软模板用来组装内消旋多孔材料,这种材料是由表面覆盖有半胱氨酸的自组装巨型金纳米粒子构成的. 首先,由于静电相互作用或者配体外部末端的羧基和氨基基团之间的缩合反应,覆盖有半胱氨酸的金纳米粒子能够自组装形成纳米线和亚微米球形粒子. 其次,球形自组装粒子在和疏水性室温离子液体1-辛基-3-甲基咪唑鎓六氟磷酸盐相互摩擦时能形成一种准固态凝胶. 最后,将复合凝胶涂在玻碳电极上,然后在PH = 7.4的磷酸缓冲溶液中用循环伏安法进行极化,由于多余的室温离子液体分散在溶胶中从而形成了一种内消旋多孔结构. 该材料具有良好的导电性和生物大分子亲和性. 由于大的外部表面积和内部的“薄层”效应,细胞色素c的感应显著增强. 实验结果表明,这种内消旋多孔材料在包括生物传感器和生物燃料电池在内的电化学设备方面具有潜在的应用前景.     

“Self‐Lockable” Liquid Crystalline Diels–Alder Dynamic Network Actuators with Room Temperature Programmability and Solution Reprocessability

Novel main‐chain liquid crystalline Diels—Alder dynamic networks (LCDANs) were prepared that exhibit unprecedented ease for actuator programming and reprocessing compared to existing liquid crystalline network (LCN) systems. Following cooling from 125 °C, LCDANs are deformed with aligned mesogens self‐locked at room temperature by slowly formed Diels–Alder (DA) bonds, which allows for the formation of solid 3D actuators capable of reversible shape change, and strip walker and wheel‐capable light‐driven locomotion upon either thermally or optically induced order–disorder phase transition. Any actuator can readily be erased at 125 °C and reprogrammed into a new one under ambient conditions. Moreover, LCDANs can be processed directly from melt (for example, fiber drawing) and from solution (for example, casting tubular actuators), which cannot be achieved with LCNs using exchangeable covalent bonds. The combined attributes of LCDANs offer significant progress toward developing easily programmable/processable LCN actuators.     

纳米稀土磷酸盐(Gd,Y)PO4:Tb的室温固相合成及发光性能

三基色荧光灯用绿色发光材料,其发光效率对总的光通量影响很大[1],因而探索不同体系的绿色发光材料的合成将意义重大.由于Tb3 离子具有较好的特征绿色发射,所以研究铽的不同体系绿粉一直是人们所感兴趣的课题[2].稀土磷酸盐发光材料具有发光亮度高,合成温度适中,色坐标x值大等优点,因而成为当前材料科学的热门[3-5].     

Study on spectroscopic characterization of Pd porphyrin and its interaction with ctDNA

The fluorescence and solid substrate room temperature phosphorescence (SS-RTP) properties of Pd(II) meso-tetrakis (4-N-methyl-pyridiniumyl) porphyrin (Pd(II)TMPyP) were studied. The factors influencing the SS-RTP emission, such as filter type, inorganic salt sort, drying temperature, pre-drying time and drying time were investigated in detail. Strong SS-RTP signal can be induced on the slow speed filter paper in the presence of the external inorganic salt, Ca(NO₃)₂, with the maximum excitation and emission wavelengths at 421 nm and 675 nm, respectively. The interaction between calf thymus DNA (ctDNA) and Pd(II)TMPyP was investigated at pH 7.2 using SS-RTP, fluorescence and UV-vis spectroscopy. The SS-RTP intensity of Pd(II)TMPyP was enhanced efficiently with the increasing amount of ctDNA. This phenomenon demonstrates that the intercalated porphyrin is shielded by ctDNA to avoid collision quenching. This result was supported by SS-RTP lifetime measurement, SS-RTP anion quenching experiment and fluorescence polarization measurement. Furthermore, with the addition of ctDNA, the UV-vis spectra of Pd(II)TMPyP shows apparent hypochromicity (40%) at the Soret maximum of 417 nm and a red shift of Δλ = 15 nm, also indicating that Pd(II)TMPyP intercalates into ctDNA bases. The binding constant of Pd(II)TMPyP to ctDNA was calculated to be 4.41 × 10⁵ L/mol based on the derivative McGhee-von Hippel plots.     

室温下合成纺锤形貌六方相NaLnF_4(Ln=Nd,Sm,Eu,Gd,Tb)纳米颗粒

室温下合成长250nm,宽100nm的纺锤形貌六方相的NaNdF4。NaEuF4,NaSmF4,NaGdF4和NaTbF4也用同样的方法获得。产物用XRD,TEM,HRTEM,FESEM和PL进行表征。PL光谱显示合成的NaEuF4的激发波长是394nm。NaEuF4有4个特征发射谱带,分别是591,615,650和681nm。     

室温固相反应一步合成N-亚水杨基-4-氨基安替比林

4-氨基安替比林与水杨酬醛通过室温固相反应合成N-亚水杨基-4-氨基安替比 林，反应无溶剂，15 min即可完成，产率达95%，用元素分析，IR，~1H NMR，X射 线粉末衍射和X射线单晶衍射对产物进行了表征。     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

A Hydrogen Peroxide Biosensor Based on Room Temperature Ionic Liquid Functionalized Graphene Modified Carbon Ceramic Electrode

A room temperature ionic liquid (IL) 1‐butyl‐3‐methylimidazolium hexafluorophosphate functionalized graphene (GE) was prepared and a hydrogen peroxide (H₂O₂) biosensor was fabricated by immobilizing hemoglobin (Hb) into the IL‐GE composite film. UV‐visible and Fourier transform infrared spectra of the composite film indicated that Hb retained its native structure in the film. Electrochemical investigation of the biosensor showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa=?0.209 V and E_pc= ?0.302 V (vs. SCE) in pH 7.0 phosphate buffer solution at the scan rate of 100 mV/s. To the reduction of H₂O₂, the biosensor had a good linear range from 8.0×10^?7 to 1.8×10^?4 mol/L with a detection limit of 3.0×10^?7 mol/L. The apparent Michaelis‐Menten constant K^app_M was estimated to be 3.4×10^?5 mol/L.     

Sample cleanup-free determination of mycophenolic acid and its glucuronide in serum and plasma using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry

Mycophenolic acid (MPA) is an immunosuppressant drug which powerfully inhibits lymphocyte proliferation. Since the early 1990s it has been used to prevent rejection in organ transplantation. The requirement of therapeutic drug monitoring shown in previous studies raises the necessity of acquiring accurate and sensitive methods to measure MPA and its major metabolite mycophenolic acid glucuronide (MPAG).The authors developed a sample cleanup-free, rapid, and highly specific method for simultaneous measurement of MPA and MPAG in human plasma and serum using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry. MPA- and MPAG-determinations were performed during a 2.0-min run time. Multiple calibration curves for the analysis of MPA and MPAG exhibited consistent linearity and reproducibility in the range of 0.05-100 (r > 0.999) mg L⁻¹ and 4-4000 mg L⁻¹ (r > 0.999), respectively. Limits of Detection were 0.014 mg L⁻¹ for MPA and 1.85 mg L⁻¹ for MPAG. Lower Limits of Quantification were 0.05 mg L⁻¹ for MPA and 2.30 mg L⁻¹ for MPAG. Interassay imprecision was <10% for both substances. Mean recovery was 103.6% (range 78.1-129.7%) for MPA and 111.1% (range 73.0-139.6%) for MPAG. Agreement was good for MPA and MPAG between the presented method and a validated HPLC-MS/MS method. The Passing-Bablok regression line for MPA and MPAG was HPLC-MS/MS = 1.14 UPLC-MS/MS—0.14 [mg L⁻¹], r = 0.96, and HPLC-MS/MS = 0.77 UPLC-MS/MS + 0.50 [mg L⁻¹], r = 0.97, respectively. This sample cleanup-free and robust LC-MS/MS assay facilitates the rapid, accurate and simultaneous determination of MPA and MPAG in human body fluids.     

Comparison of three methods for fractionation and enrichment of low molecular weight proteins for SELDI-TOF-MS differential analysis

In most diseases, the clinical need for serum/plasma markers has never been so crucial, not only for diagnosis, but also for the selection of the most efficient therapies, as well as exclusion of ineffective or toxic treatment. Due to the high sample complexity, prefractionation is essential for exploring the deep proteome and finding specific markers.In this study, three different sample preparation methods (i.e., highly abundant protein precipitation, restricted access materials (RAM) combined with IMAC chromatography and peptide ligand affinity beads) were investigated in order to select the best fractionation step for further differential proteomic experiments focusing on the LMW proteome (MW inferior to 40,000 Da). Indeed, the aim was not to cover the entire plasma/serum proteome, but to enrich potentially interesting tissue leakage proteins. These three methods were evaluated on their reproducibility, on the SELDI-TOF-MS peptide/protein peaks generated after fractionation and on the information supplied.The studied methods appeared to give complementary information and presented good reproducibility (below 20%). Peptide ligand affinity beads were found to provide efficient depletion of HMW proteins and peak enrichment in protein/peptide profiles.