A structural analysis of the complexes of (S,S)-dimethylpyridino-18-crown-6 with (R) and (S)-[α-(1-naphthyl)ethyl]ammonium perchlorate by NMR techniques and molecular modeling

Significant - interaction is found in the complexes of (S, S)-dimethylpyridino-18-crown-6 with (R)- and (S)-[-(1-naphthyl)ethyl]ammonium perchlorate. This finding is supported by the¹H NOESY NMR spectral technique, greater chemical shift changes of aromatic protons in both host and guest molecules upon complexation, and by molecular mechanics calculations. Because of the flexibility of the ligand, the tripod hydrogen bonding causes¹³C relaxation times of all periphery carbons to decrease without significant selectivity. Rotational energy barrier calculations of the methyl groups of the complexed ligand also show that the (S, S)-host-(R)-guest is the more stable complex.     

Relationship of rotational correlation time from EPR spectroscopy and protein-membrane interaction

A study was carried out to determine if rotational correlation time of spin-labeled hen egg lysozyme (HEL) interacting with ultrafiltration membranes could be used to infer protein-membrane interaction. Polysulfone and cellulosic membranes, which have notably different adsorption properties, and membranes with varying pore sizes were used in this study. Based on this study, it was determined that the rotational correlation time does reflect variations in protein adsorption and pore plugging on membranes. The rotational correlation times for the highly adsorbent polysulfone (2.82 × 10⁻⁸ s) were significantly higher than those obtained from proteins on cellulosic membranes (0.62 × 10⁻⁸ s) and from those in solution (0.17 × 10⁻⁸ s). Rotational correlation time was also increased due to steric hindrance associated with pore plugging, although it was not as significant as the adsorption effect. This study indicates that the rotational time constant can be used to infer the type of protein-membrane interaction.     

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

On the size consistence of a few approximate multireference CI schemes

Using the canonical problem of N separate electron pairs, theN dependence of approximate multireference CI schemes is analyzed. When the DCI is taken as multireference space, the second order Quasi Degenerate Many Body Perturbation Theory (QD(MB)PT) gives twice the expected correction, while the CIPSI algorithm gives 66% of it, and the MRDCI a vanishing part of it. A modified QDPT effective hamiltonian, and a combination of CIPSI and QDPT algorithms seem to give better trends.     

Interaction between Metal in Metallo Enzyme and Small Biological Molecules

ＩｎｔｅｒａｃｔｉｏｎｂｅｔｗｅｅｎＭｅｔａｌｉｎＭｅｔａｌｌｏＥｎｚｙｍｅａｎｄＳｍａｌｌＢｉｏｌｏｇｉｃａｌＭｏｌｅｃｕｌｅｓ￥ＨｕＪｉｅ－Ｈａｎ；ＳｈｕＺａｎ－Ｙｏｎｇ；ＴａｏＬｉ－Ｍｅｉ；ＣｈｅｎｇＧｕｏ－Ｂａｏ（ＤａｌｉａｎＩｎｓｔｉｔｕｔ...     

Thermodynamics of molecular interactions in ethyl iodide+toluene mixtures

The excess Gibb's free energy of mixing, G^E, for ethyl iodide+toluene at 25°C have been obtained from the measured vapor pressuure data. The H^E and G^E values for ethyl iodide+toluene are positive throughout the ethyl iodide concentration range and G^E>H^E. The results have been analyzed in terms of Flory and ideal associated model theory of nonelectrolyte solutions. It has been observed that the ideal associated model approach which assumes the presence of AN and A₂B molecular species describes well (within±10 J-mol^–1 in the worst case) the general dependence of H^E on X_A (mole fraction of ethyl iodide) over the whole composition range for ethyl iodide+toluene mixtures. The equilibrium constants for A+A AB and 2A+BA₂B reactions along with the enthalpies of formation of AB and A₂B molecular species have been calculated.     

Orbital Energy Order and the Through Bond Interaction in Homonuclear Diatomic Molecules

The homonuclear diatomic molecules are the simplest systems having both the σ framework and the lone pair orbitals n_a and _b for investigating their through space and through bond interaction. The striking orbital energy order n_g～ n_a+ n_b > n_n ～ n_a - n_b has been accounted for by the through bond interaction. However, when the p-content in the lone pair orbitals n_a and n_b decreases, one may have the reverse orbital energy order: n_g < n_g. A reverse orbital energy order has been found in F₂ and Cl₂, whose n_a and n_b are almost pure s-type atomic orbitals. The reverse order also occurs in molecule N₂ when the internuclear distance is larger man 1.5 Å. It is also found that the detail through space and through bond interaction and the eventual orbital energy order for n_g and n_u can be accounted for by the Fock operator within the localized molecular orbital space.     

Substituent Effects on the C-C Bond Strength, 15[1] Geminal Substituent Effects, 7[2]. Thermochemistry and Thermal Decomposition of Alkyl-substituted Tricyanomethyl Compounds

The thermolysis reactions of the tricyanomethyl compounds 10a-c were studied in solution. 2,2-Dicyano-3-methyl-3-phenylbutyronitrile ( 10a ) and 2,2-dicyano-3-methyl-3-(4-nitrophenyl)butyronitrile ( 10b ) decomposed heterolytically into carbenium ions and (CN)₃C⁻ anions, while 9-methyl-9-(tricyanomethyl)fluorene ( 10c ) underwent about 11% homolytic C-C bond cleavage into 9-methyl-9-fluorenyl- and tricyanomethyl radicals. The rates of the homolysis were determined by a radical scavenger procedure under conditions of pseudozero order kinetics. From the temperature effect on the rate constants the activation parameters were determined [ΔH ( 10c ) = 155· 2 kJ mol⁻¹, ΔS ( 10c ) = 58· 5 J mol⁻¹ K⁻¹]. Standard enthalpies of formation ΔH (g) were determined for 2,2-dicyanopropionitrile ( 2 ) (422.45 kJ mol⁻¹), 2,2-dicyanohexanenitrile ( 3 ) (349.74 kJ mol⁻¹), 2,2-dicyano-3-phenylpropionitrile ( 4 ) (540.75 kJ mol⁻¹), 2-butyl-2-methylhexanentrile ( 5 ) (-133.20 kJ mol⁻¹), 2,2-dimethylpentanenitrile ( 6 ) (-45.78 kJ mol⁻¹), and 2-methylbutyronitrile ( 7 ) (2.44 kJ mol⁻¹) from the enthalpies of combustion and enthalpies of sublimation/vaporization. From these data and known Δ (g) values for alkanenitriles and -dinitriles, thermochemical increments for ΔH (g) were derived for alkyl groups with one, two, or three cyano groups attached. The comparison of these increments with those of alkanes reveals a strong geminal destabilization, which is interpreted by dipolar repulsions between the cyano groups. - From ΔH (g) of 10c and ΔH of its homolytic decomposition the radical stabilization enthalpy for the tricyanomethyl radical 1 RSE ( 1 ) = -18 kJ mol⁻¹ was determined. Thus, 1 is destabilized, in comparison with the RSEs of tertiary α-cyanalkyl (23 kJ mol⁻¹) and α,α-dicyanoalkyl (27 kJ mol⁻¹) radicals, which were recalculated from bond homolysis measurements^[4] and the new thermochemical data. This change of RSE on increasing the number of α-cyano groups is discussed as the result of the additive contributions by resonance stabilization and increasing destabilization by dipolar repulsion. The amount of the dipolar energies was estimated by molecular mechanics (MM2).