An iterative Bregman regularization method for optimal control problems with inequality constraints

We study an iterative regularization method of optimal control problems with control constraints. The regularization method is based on generalized Bregman distances. We provide convergence results under a combination of a source condition and a regularity condition on the active sets. We do not assume attainability of the desired state. Furthermore, a priori regularization error estimates are obtained.     

Global existence and nonexistence of solutions for a viscoelastic wave equation with nonlinear boundary source term

In this paper, we consider the initial boundary value problem for a viscoelastic wave equation with nonlinear boundary source term. First of all, we introduce a family of potential wells and prove the invariance of some sets. Then we establish the existence and nonexistence of global weak solution with small initial energy under suitable assumptions on the relaxation function , nonlinear function , the initial data and the parameters in the equation. Furthermore, we obtain the global existence of weak solution for the problem with critical initial conditions and .     

双级双泵浦掺铒光纤C+L波段ASE光源的实验研究

本文通过对常见的双级双程双泵浦光源进行实验研究,分析了两级掺铒光纤的长度以及两级泵浦的功率对光源输出光谱的功率大小、平坦度和平均波长的影响。根据实验分析结果,当EDF1和EDF2的长度分别为9 m和38 m,一级泵浦功率为65 mW,二级泵浦功率为115 mW时,光源输出功率为16.89 mW,平均波长为1 566.389nm,1 536nm-1 605nm波段范围内光谱的不平坦度±2dB。     

气源分子束外延生长的InPBi薄膜材料中的深能级中心

利用深能级瞬态谱(DLTS)研究了气源分子束外延(GSMBE)生长的InP1-xBix材料中深能级中心的性质。在未有意掺杂的InP中测量到一个多数载流子深能级中心E1,E1的能级位置为Ec-0.38 e V,俘获截面为1.87×10~(-15)cm~2。在未有意掺杂的InP0.9751Bi0.0249中测量到一个少数载流子深能级中心H1,H1的能级位置为Ev+0.31 eV,俘获截面为2.87×10~(-17)cm~2。深中心E1应该起源于本征反位缺陷PIn,深中心H1可能来源于形成的Bi原子对或者更复杂的与Bi相关的团簇。明确这些缺陷的起源对于InPBi材料在器件应用方面具有重要的意义。     

X波段新型低阻抗高功率微波源的模拟研究

提出了一种新型低阻抗高功率微波源,能在单个器件内产生两束锁相的相干高功率微波,对两束相干微波进行功率合成有望在单个高功率微波器件中实现更高的功率输出.粒子模拟结果显示,在电压687 k V、磁场0.8 T时,该微波源整体阻抗36?,两束微波的频率都为9.72 GHz,输出功率分别为1.20 GW和2.58 GW,功率效率分别为28%和30%;两束输出微波之间频率抖动小于±3 MHz,相位差抖动小于±3?.     

可接入射频半实物的试验数据转换系统设计与实现

试验环节是产品研制生命周期中的重要环节,但是一直以来都缺乏有效的管理手段,在整个测试阶段都存在大量的人为的、重复性的工作,导致试验效率低下,为改善这一现状,提高试验效率,提出了一种基于PXIe数据采集系统,借助LabVIEW和DIAdem软件的测试系统解决方案：以LabVIEW控制数据高速同步采集,DIAdem调用LabVIEW模块执行算法分析,通过软件集成,实现对测试系统的全面管理,包括数据采集、数据检索、数据分析、报表生成及整个流程的自动化控制。本文以C919飞机电源测试系统为介绍对象,对该套测试系统解决方案进行阐述,实际测试情况表明,在数据吞吐率大于200M/S的情况下,相对传统测试方法,该测试方案在保证测试精度的基础上,极大的提高了试验效率,极大的提高了系统的可扩展性和可维护性。     

基于光纤振动安全预警系统的振源识别算法研究

光纤振动预警系统可自动采集周边振动信号,面对大量复杂的振动信号,如何准确识别目标振源是系统研究的难点。针对光纤振动安全预警系统采集到的振动信号进行属性特征分析,建立相应的特征模型,并建立振源属性特征模型,包括识别下雨振源的能量信息熵模型,以及区分机械施工和车辆经过振源的基频稳定性模型等。通过振源识别算法,提高了振源类型识别的准确性。测试结果表明,特征模型的设计和选择合理,识别准确率高。     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Progress in direct solid sampling analysis using line source and high-resolution continuum source electrothermal atomic absorption spectrometry

The literature about direct solid sample analysis of the past 10–15 years using electrothermal atomic absorption spectrometry has been reviewed. It was found that in the vast majority of publications aqueous standards were reported as having been used for calibration after careful program optimization. This means the frequently expressed claim that certified reference materials with a matrix composition and analyte content close to that of the sample have to be used for calibration in solid sample analysis is not confirmed in the more recent literature. There are obviously limitations, and there are examples in the literature where even calibration with certified reference materials did not lead to accurate results. In these cases the problem is typically associated with spectral interferences that cannot be corrected properly by the systems available for conventional line source atomic absorption spectrometry, including Zeeman-effect background correction. Using high-resolution continuum source atomic absorption spectrometry, spectral interferences become visible owing to the display of the spectral environment at both sides of the analytical line at high resolution, which makes program optimization straightforward. Any spectrally continuous background absorption is eliminated automatically, and even rapidly changing background absorption does not cause any artifacts, as measurement and correction of background absorption are truly simultaneous. Any kind of fine-structured background can be eliminated by “subtracting” reference spectra using a least-squares algorithm. Aqueous standards are used for calibration in all published applications of high-resolution continuum source atomic absorption spectrometry to direct solid sample analysis. This contribution is based on a presentation given at the Colloquium for Analytical Atomic Spectroscopy (CANAS ‘07) held March 18–21, 2007 in Constance, Germany.