Fracture strength of class II slot cavities restored with polymerizable restorative materials

This study compared the fracture strength of Class II slot cavities restored with polymerizable restorative materials. Sixty, caries-free, posterior teeth were divided into five groups of 12 teeth. The Class II slot cavities were prepared. The teeth were restored with two packable composites (Filtek P60, Surefil), a microhybrid composite (Filtek Z250)and two ormocer (Definite, Admira). The restorations were then subjected to fracture resistance tests. The marginal ridges of the restorations were loaded at an angle of 13.5° to the long axis of the tooth in an Universal Testing Machine until failure. Analysis of mean forces indicated that, Filtek P60, Surefil and Filtek Z250 exhibited better performance than Definite and Admira. The tested resin composites differed in their mechanical properties. This study suggested that fracture behavior were highly influenced by the filler system. Overall, Filtek P60, Surefil, Filtek Z250, demonstrated good fracture resistance. Copyright © 2003 John Wiley & Sons, Ltd.     

Micromechanisms and Mechanics of Damage and Fracture in Thin Film/Substrate Systems

The purpose of this paper is to review the mechanisms and available theoretical methods for modeling the strength and failure of thin film/substrate systems     

Mesh-Independent Modeling and Moiré Interferometry Studies of Damage Accumulation in Open-Hole Composite Laminates

Mechanics of Composite Materials - A three-dimensional ply-level modeling of multiple matrix cracking near an open hole in a quasi-isotropic composite laminate was performed. A mesh-independent...     

关于"太阳在银河系中所受引力与到银心距离r的关系"的讨论

讨论了银道面内的引力场强分布和太阳在银河系中所受引力与到银心距离r的关系，指出引力场强g并不是与r的平方成反比，这是由于银河系的大小和形状不能忽略造成的．强调了万有引力定律的适用条件．     

砼强度准则在井壁结构中的应用研究

本文根据井壁结构模型试验结果,对目前具有代表性的复杂应力状态下的砼强度准则进行了分析和对比,找到了一种比较适合于井壁结构的砼强度准则,从而为井壁结构承载能力的合理计算提供了理论基础.     

对排球普修课扣球教学中两种起跳方法的分析

本文在对排球普修课扣球技术采用不同起跳方法的教学基础上，对实验组、对照组助跑摸高成绩进行了比较分析，认为在对初学者扣球起跳技术的教学中，应以并步起跳为宜．掌握了并步起跳技术以后，再向学生介绍跨步起跳技术．     

Spectral distributions in nuclei: General principles and applications

The subject of spectral distribution methods where one derives and applies the locally smoothed forms of observables in nuclei is briefly reviewed. It is well understood that the local forms (with respect to energy) of the level density function, expectation values and strength densities are Gaussian, linear (or ratio of Gaussians) and a bivariate Gaussian respectively. To accomodate symmetries in the above forms, one has to deal with multivariate distributions in general; for example the angular-momentum (J) decomposition leads to a bivariate Gaussian form for the level density. These results extend to indefinitely large spaces by method of partitioning and they generate convolution forms. The origin of these remarkable spectral properties is discussed and shell model examples are given to substantiate their applicability to nuclear systems. Spectral distribution theory is a practical, usable theory because the smoothed forms are defined in terms of traces of low particle-rank operators, and the trace information propagates. Finally we discuss the application of the spectral methods for a wide range of nuclear problems; these include binding energies, orbit occupancies, electromagnetic andβ-decay sum rule quantities, analysis of operators, symmetry breaking, numerical level densities, and determination of bounds on time-reversal non-invariant part of nucleon-nucleon interaction.     

基于方阱模型计算液体的导热率

为了满足工程上对液体导热率的要求,在方阱模型基础上提出了计算液体导热率的方程。所得的导热率计算方程包括分子平动贡献项和分子内部能量贡献项。为了计算方便,根据分子模拟数据提出了计算中所需的方阱流体的径向分布函数的关联式。物质的能量参数由其临界温度估算,而硬壳体积则由基团贡献法获得。考虑到实际液体有别于方阱流体,在实际液体导热率计算中引入了一个与密度有关的校正参数。使用该文提出的方法,对液体氩及10种液态烃类物质的导热率进行了计算,其计算的平均相对误差小于5.3%。     

一种非刚性医学图像点匹配方法

提出了一种非刚性点匹配的算法并把其运用于医学图像配准．该算法采用信号滤波的方法来获得点集间的匹配信息，并运用松弛标记法将各点邻域关系对模糊的匹配信息进行迭代获得明确的匹配关系．在此基础上，利用高斯径向基函数来描述点模式间的弹性形变，在基本的迭代框架下实现问题的求解．实验结果显示在形变程度为5％、出格点比率50％和噪声标准差为5％的情况下该算法的匹配误差能控制在0．13以下，表明了该算法的鲁棒性和有效性，较好地解决了医学非刚性形变的点匹配问题．     

An accurate method to predict the stress concentration in composite laminates with a circular hole under tensile loading

The paper presents a theoretical-numerical hybrid method for determining the stresses distribution in composite laminates containing a circular hole and subjected to uniaxial tensile loading. The method is based upon an appropriate corrective function allowing a simple and rapid evaluation of stress distributions in a generic plate of finite width with a hole based on the theoretical stresses distribution in an infinite plate with the same hole geometry and material. In order to verify the accuracy of the method proposed, various numerical and experimental tests have been performed by considering different laminate lay-ups; in particular, the experimental results have shown that a combined use of the method proposed and the well-know point-stress criterion leads to reliable strength predictions for GFRP or CFRP laminates with a circular hole. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 4, pp. 531–570, July–August, 2007.