可压稠密气固两相流动过程的模拟计算

基于稠密气体分子运动论和颗粒动理学,建立可压稠密气固两相流动模型。采用梯度模拟来考虑气相可压缩性对气相湍流的影响。模拟计算表明气固两相射流速度沿轴向和径向减小,颗粒浓度下降。气固两相射流具有高的颗粒温度,呈现强烈的气固两相湍流流动特性。     

一类复杂循环排队系统的计算机模拟及其在进程调度中的应用

讨论了顾客到达时间和服务时间与等待队列队长有关的排队系统模拟,顾客服务次数不止1次即出现循环的复杂排队系统,引入到达因子、服务台因子和循环因子,在串并联多服务台情形下建立了4类计算机模拟模型,给出该复杂循环排队系统在进程调度中的应用并进行了计算机模拟.     

基于MATLAB的异步电动机线性化控制系统的仿真

从异步电动机在同步旋转坐标系下的状态方程出发，在一定的条件下，对其系数矩阵简化．推出异步电动机的线性化控制模型．并基于该模型得出异步电动机的线性化控制系统．以给定电机为例，对该模型的有效性、响应用MATLAB进行仿真分析．验证的结果说明上述模型具有实用价值．     

识别混凝土板内部缺陷的人工神经网络算法

以一维有缺陷混凝土板为研究对象，分别采用Leverberg-Marcluardt和径向基神经网络算法，对缺陷的深度与厚度进行识别，从而实现对混凝土板内部缺陷的三维重构，称为红外CT模拟．两类神经网络算法的识别结果表明：Leverberg-Marcluardt神经网络较径向基神经网络具有更好的收敛精度与计算效率．     

二元液态金属Cu-Ni和Ag-Cu凝固过程的分子动力学模拟研究

用Quantum Sutton-Chen多体势对Ag6Cu4和CuNi液态金属凝固过程进行了分子动力学模拟研究.在冷却速率2×1012到2×1014K/s范围内,CuNi总是形成fcc晶体结构,而Ag6Cu4总是形成非晶态结构.考虑到CuNi及AgCu中原子半径之比分别为1.025和1.13,那么模拟结果证实了原子的尺寸差别是非晶态合金形成的一个主要影响因素.此外采用键对及原子多面体类型指数法对凝固过程中微观结构组态变化的分析,不但能说明二十面体结构在非晶态合金形成和稳定性中所起的关键作用,又有助于对液态金属的凝固过程、非晶态结构特征的深入理解.     

HLS直线加速器调制器系统设计与改造

介绍了合肥同步辐射光源速调管调制器改造项目.在新的设计中采用了开关型恒流PFN充电电源,计算了充电参数,建立了主放电回路的仿真模型,重点分析了电路中反向电压问题,依据仿真结果及分析设计了反向保护电路.给出了运行中的主要波形.最后介绍了新的调制器控制系统.     

探针式水位跟踪仪的设计与应用

介绍了水位跟踪原理,分析了一种新型的探针式水位跟踪仪及其构成。     

Large scale petroleum reservoir simulation and parallel preconditioning algorithms research

Solving large scale linear systems efficiently plays an important role in a petroleum reservoir simulator, and the key part is how to choose an effective parallel preconditioner. Properly choosing a good preconditioner has been beyond the pure algebraic field. An integrated preconditioner should include such components as physical background, characteristics of PDE mathematical model, nonlinear solving method, linear     

Methods for implementing the stream boundary condition in DSMC computations

In the direct simulation Monte‐Carlo (DSMC) method for simulating rarefied gas flows, the velocities of simulator particles that cross a simulation boundary and enter the simulation space are typically generated using the acceptance–rejection procedure that samples the velocities from a truncated theoretical velocity distribution that excludes low and high velocities. This paper analyses an alternative technique, where the velocities of entering particles are obtained by extending the simulation procedures to a region adjacent to the simulation space, and considering the movement of particles generated within that region during the simulation time step. The alternative method may be considered as a form of acceptance–rejection procedure, and permits the generation of all possible velocities, although the population of high velocities is depleted with respect to the theoretical distribution. Nevertheless, this is an improvement over the standard acceptance–rejection method. Previous implementations of the alternative method gave a number flux lower than the theoretical number required. Two methods for obtaining the correct number flux are presented. For upstream boundaries in high‐speed flows, the alternative method is more computationally efficient than the acceptance–rejection method. However, for downstream boundaries, the alternative method is extremely inefficient. The alternative method, with the correct theoretical number flux, should therefore be used in DSMC computations in favour of the acceptance–rejection method for upstream boundaries in high‐speed flows. Copyright © 2003 John Wiley & Sons, Ltd.