Linear polybiurets: Facile synthesis and characteristic properties

Linear polybiurets have been synthesized by polyaddition of benzyloxyamine and diisocyanates, and properties of the novel polymeric materials have been elucidated. Prior to polymerization, model reactions between benzyloxyamine and phenyl isocyanate were examined in detail and proved to be controlled by the molar ratio of reagents and by catalysts to give the urea (1:1 adduct) and/or biuret (1:2 adduct). Under appropriate conditions, the biuret was synthesized in a quantitative yield. Polymerization of equimolar amounts of benzyloxyamine and diphenylmethane or hexamethylene diisocyanate proceeded smoothly to give polybiurets with inherent viscosities up to 0.52 dL/g. The benzyl group of the model biuret and polybiuret could be removed by catalytic hydrogenation. Both the N-benzyloxy-type and N-hydroxy-type polybiurets showed excellent solubility in common organic solvents. The two kinds of polybiurets as well as model biurets adsorbed metal cations efficiently. The N-hydroxybiuret structure exhibited particularly high affinity for iron(III) and was useful for selective removal of iron from metal cation mixtures. © 1996 John Wiley & Sons, Inc.     

Effect of curing accelerators on thermal imidization of polyamic acids at low temperature

The effect of new additives on the thermal conversion of a range of polyamic acids to polyimides at temperatures lower than 100°C was investigated using infrared spectroscopy. Additives such as m-hydroxybenzoic acid, p-hydroxyphenylacetic acid, and p-hydroxybenzenesulfonic acid were found to be highly effective as curing catalysts or accelerators. The degree of imidization of polyamic acids in the presence of additives increased with an increase in the reaction temperature, and complete imidization was achieved at 140–200°C. The reaction was characterized by a rapid rate that slowed with time. © 1996 John Wiley & Sons, Inc.     

Cation exchange membranes by pre-irradiation grafting of styrene into FEP films. II. Properties of copolymer membranes

The structure and some physico-chemical properties of radiation grafted FEP-g-polystyrenesulfonic acid proton exchange membranes were studied as a function of the degree of grafting. The distribution of grafted polymer across the membrane thickness was obtained from microprobe measurements. It was found that for low levels of grafting (ca. 3%), polystyrene chains are located near the membrane surface only, and the interior of the membrane remains ungrafted. With the increasing degree of grafting, polystyrene chains were incorporated into the interior of the membrane as well. An almost homogeneous distribution of grafts in the membrane was obtained at a graft level of > 13%. The influence of the degree of grafting on membrane properties, such as ion exchange capacity, swelling, and specific resistivity was studied. Three different states of water, viz., freezing free, freezing bound, and nonfreezing water have been identified in noncrosslinked membranes. However, the nature and the amount of crosslinker had a profound influence on the states of water in a membrane. © 1996 John Wiley & Sons, Inc.     

Die Deprotonierung silylierter Amido-Komplexe von Seltenerdelementen

Deprotonation Reactions of Silylated Amido Complexes of Rare Earth Elements The deprotonation of the rare earth element-tris(bistrimethylsilyl)amides Ln[N(SiMe₃)₂]₃ of scandium, ytterbium, and lutetium with sodium-bis(trimethylsilyl)amide in THF leads to the complexes [Na(THF)₃LnCH₂SiMe₂NSiMe₃{N(SiMe₃)₂}₂] [Ln = Sc ( 1 ), Yb ( 2 ), and Lu ( 3 )]. According to crystal structure analyses of 1 and 2 the metal atoms Sc and Yb are constituents of planar LnCSiN four-membered rings. At the same time, the C atom of the CH₂ group is coordinated with the sodium ion in a linear axis Ln–C–Na; the sodium ion obtains a distorted tetrahedral arrangement by three THF molecules. The equatorial positions of the methylene-C atom, which is coordinated in a trigonal bipyramidal fashion, are occupied by the two H atoms and the Si atom of the four-membered ring. 2.6-dimethylbenzoisonitrile can be inserted into the Yb–CH₂ bond of 2 and the new five-membered heterocylce YbNCSiN originates, the exocyclic CH₂ group of which enters into a C–C coupling with the centrosymmetric dimer 4 while the ytterbium undergoes reduction. At the same time, sodium-7-methyl indolate is formed, which together with [NaN(SiMe₃)₂(THF)₂] forms the centrosymmetric dimeric molecular aggregate [NaN(SiMe₃)₂(THF)₂Na(C₉H₁₆N)]₂ ( 5 ). 1 : Space group P2₁/n, Z = 8, lattice dimensions at –80 °C: a = 2941.4(2), b = 1205.5(1), c = 2952.4(3) pm; β = 113.455(8)°; R₁ = 0.0625. 2 : Space group P2₁/n, Z = 8, lattice dimensions at –80 °C: a = 2943.9(1), b = 1219.5(1), c = 2944.3(1) pm; β = 113.372(4)°; R₁ = 0.0361. 4 : Space group P 1, Z = 4, lattice dimensions at –80 °C: a = 1117.0(1), b = 1207.5(1), c = 1614.3(2) pm; α = 73.634(10)°, β = 82.091(10)°, γ = 74.391(10)°; R₁ = 0.0525. 5 : Space group P2₁/n, Z = 2, lattice dimensions at –80 °C: a = 1126.7(1), b = 1459.3(1), c = 1741.1(1) pm; β = 96.461(8)°; R₁ = 0.0458. Quantum chemical DFT calculations of the scandium model compound [Na(Me₂O)₃ScCH₂SiMe₂NSiH₃{N(SiH₃)₂}₂] ( 1 M ) give a very large negative charge at the pentacoordinated carbon atom of the four-membered ring that is concentrated in a lone-pair orbital which has mainly p character. The carbon atom interacts with the positively charged scandium atom mainly by Coulombic interactions.     

磷酸三丁酯增敏极谱法测定铜的研究

在０．００４ｍｏｌ／Ｌ ＨＣｌ－１×１０＾－３ｍｏｌ／Ｌ ＳＣＮ＾－－５×１０＾－５ｍｏｌ／Ｌ磷酸三丁酯（ＴＢＰ）溶液中，Ｃｕ＾２＋可在－０．４２Ｖ（ｖｓ．ＳＣＥ）产生灵敏的极谱波，波高较无ＴＢＰ存在时增加近３倍，二阶导数峰电流与０．００５￣４．０ｍｇ／Ｌ Ｃｕ＾２＋呈线性关系。研究了极谱波性质及增敏机理，表明该极谱波为配合物吸附波，ＴＢＰ起协同吸附作用。本法已用于实际样品分析，结果满意。     

Ethylene polymerization reactions with Ziegler–Natta catalysts. III. Chain-end structures and polymerization mechanism

Ethylene polymerization reactions with many Ziegler–Natta catalysts exhibit a number of features that differentiate them from polymerization reactions of α olefins: (1) a relatively low ethylene reactivity, (2) markedly higher polymerization rates in the presence of α olefins, (3) a high reaction order with respect to ethylene concentration, and (4) a strong reversible rate depression in the presence of hydrogen. A detailed kinetic analysis of ethylene polymerization reactions¹ provided the basis for a new kinetic scheme that postulates the equilibrium formation of Ti C₂H₅ species with the H atom in the methyl group β-agostically coordinated to the Ti atom in an active center. This mechanism predicts several new features of ethylene polymerization reactions, one being that chain initiation via insertion of any α-olefin molecule into the Ti H bond should proceed with an increased probability compared to that via ethylene insertion into the same bond. As a result, a significant fraction of ethylene/α-olefin copolymer chains should contain α-olefin units as the starting units. This article provides experimental data supporting this prediction on the basis of both a detailed structural analysis of co-oligomers formed in ethylene/1-pentene and ethylene/4-methyl-1-pentene copolymerization reactions and a spectroscopic analysis of chain ends in the copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4281–4294, 1999     

Thermal properties of poly(anthranilic acid) (PANA) and humidity-sensitive composites derived from heat-treated PANA and poly(vinyl alcohol)

Thermal conversion of poly(anthranilic acid) (PANA) to polyaniline (PAn) has been studied by means of thermogravimetric/mass (TG/MS) and Fourier transform infrared (FTIR) spectroscopy. The electrical conductivity of the chemically prepared PANA was 3.5 × 10⁻² S/cm, which is caused by the self-doping of the polaronic nitrogen atom interacting with the ionized carboxyl group ( COO⁻). The heat-treated PANA can be assumed to be identical to an emeraldine base of PAn. The pyrolysis of PANA proceeded through the decarboxylation at two stages from carboxyl ( COOH) and ionized carboxyl groups, which occurred at about 170 and 230 °C, respectively. PANA–SA, which was prepared by treating PANA at 250 °C and then doping with an external protonic acid at room temperature, showed a considerably high conductivity (6.2 S/cm). The composite consisting of PANA–SA and poly(vinyl alcohol) was very sensitive to the environmental humidity. The logarithm of electrical conductivity of this composite was proportional to the relative humidity covering more than five orders of magnitude, and the change in conductivity extended from 4.2 × 10⁻⁵ to 10 S/cm upon the humidity variation from 14 to 91%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4458–4465, 1999     

Synthesis and electrical conductivity of some poly[4‐amino‐2,6‐pyrimidinodi‐thiocarbamate]–metal complexes

Poly[4‐amino‐2,6‐pyrimidinodithiocarbamate] was prepared from the reaction of 2‐mercapto‐4,6‐diaminopyrimidine with carbon disulfide, followed by condensation through the removal of H₂S gas. Five polymer–metal complexes of manganese, ferrous, ferric, zinc and mercury were then prepared. The polymer–metal complexes are investigated by elemental analyses, ultraviolet Fourier transform infrared and magnetic susceptibility. The DC electrical conductivity variation with the temperature in the region 298–498 K of the five polymer–metal complexes was determined. Doping with 5% ZnCl₂ increased the electrical conductivity of the polymer at all temperatures investigated. All the polymer–metal complexes showed an increase in conductivity with an increase in temperature, which is a typical semiconductor behavior. The proposed structure of the complexes is (MLX₂·mH₂O)_n. All the polymer–metal complexes are thermally stable, are insoluble in common organic solvents and have high melting points. Copyright © 1999 John Wiley & Sons, Ltd.     

[Co(g5‐Me5C5)(g3‐tBu2PPCH–CH3)] aus [Co(g5‐Me5C5)(g2‐C2H4)2] und tBu2P–P=P(Me)tBu2

Coordination Chemistry of P‐rich Phosphanes and Silylphosphanes. XVII [1] [Co(g⁵‐Me₅C₅)(g³‐^tBu₂PPCH–CH₃)] from [Co(g⁵‐Me₅C₅)(g²‐C₂H₄)₂] and ^tBu₂P–P=P(Me)^tBu₂ [Co(η⁵‐Me₅C₅)(η³‐^tBu₂PPCH–CH₃)] 1 is formed in the reaction of [Co(η⁵‐Me₅C₅)(η²‐C₂H₄)₂] 2 with ^tBu₂P–P 4 (generated from ^tBu₂P–P=P(Me)^tBu₂ 3 ) by elimination of one C₂H₄ ligand and coupling of the phosphinophosphinidene with the second one. The structure of 1 is proven by ³¹P, ¹³C, ¹H NMR spectra and the X‐ray structure analysis. Within the ligand ^tBu₂P¹P²C¹H–CH₃ in 1 , the angle P1–P2–C1 amounts to 90°. The Co, P1, P2, C1 atoms in 1 look like a „butterfly”︁. The reaction of 2 with a mixture of ^tBu₂P–P=P(Me)^tBu₂ 3 and ^tBu–C?P 5 yields [Co(η⁵‐Me₅C₅){η⁴‐(^tBuCP)₂}] 6 and 1 . While 6 is spontaneously formed, 1 appears only after complete consumption of 5 .     

铁铬系高（中）温变换催化剂研究现状

本文介绍和评述了国内外铁铬系高（中）温变换催化剂的现状和研究动态,其中包括铁铬系高温变换催化剂的应用和研究意义、变换反应的机理以及各种助剂的影响,并指出了该研究的发展趋势。