Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

基于RTW的双向充放电机实时控制技术

随着智能电网和绿色能源技术的快速发展,双向充放电机也越来越受到关注;文章主要研究双向充放电机充电过程中电压的稳定性和放电过程中并网电流波形的畸变率;提出了一种基于RTW的matlab/simulink控制方法,在simulink环境下搭建仿真模型和控制模型,然后将达到预期效果的仿真模型所对应的控制模型编译为代码并烧写到DSP中;此种方法在能够保证在恒流源和恒压源两种充电模式中电流和电压的稳定性,在放电过程中并网谐波电流总畸变率小于5%,功率因数基本为1;仿真结果和基于DSP2812的硬件平台实验都证明了这种方法的有效性。     

非链式HF/DF激光器的研究进展

HF/DF激光器是中红外波段能提供最高能量输出的激光光源,也是中红外波段应用非常广泛的相干光源。本文介绍了近几年国内外关于非链式HF/DF激光器的研究进展及其成果应用,分析了非链式HF/DF激光器在应用方面的优缺点,总结了实现非链式HF/DF激光输出的关键技术和存在的问题,指出了该技术的未来发展方向。     

Micro-arc ignition on the oily surface of capacitively-coupled plasma

Micro-arc ignition on the oily surface is investigated in a capacitively-coupled plasma (CCP) system. In this system, micro-arc generation is enhanced by increased level of plasma potential, which is induced by a DC-grounded coil between blocking capacitor and the powered electrode. The images of micro-arcs are captured with very short exposure time of 20 μs using intensified charge-coupled device triggered by a high speed comparator and the focused ground electrode is partially soiled with oil. The micro-arcs are observed only on the oily surface of the electrode. This observation provides that the oily surface of CCP is very weak for micro-arc ignition and micro-arc ignition is supposed to be enhanced by the oil evaporation and the thin oil layer, considering the RF Paschen breakdown of the oil vapor within the sheath and the dielectric breakdown of thin oil layer.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

β-PbO2/TiO2纳米管电极的制备及其电催化降解苯酚

采用阳极氧化法和脉冲电沉积制备出β-PbO2改性TiO2纳米管(β-PbO2/TiO2-NTs)电极,通过扫描电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等技术手段对制备的β-PbO2/TiO2-NTs电极的表面形貌和结构进行了表征。结果表明,该方法成功地将β-PbO2纳米颗粒分散在TiO2纳米管中,通过电催化降解苯酚评价了β-PbO2/TiO2-NTs电极的电催化活性,实验结果表明,在TiO2-NTs中电沉积β-PbO2提高了电极的电催化活性,对苯酚的降解达到83%。     

Improving the performance of all-solid-state supercapacitors by modifying ionic liquid gel electrolytes with graphene nanosheets prepared by arc-discharge

Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.     

高效阴离子交换色谱积分脉冲安培法测定蓝藻细胞培养液中的蔗糖和甘油葡糖苷

建立了一种测定蓝藻细胞培养液中蔗糖和甘油葡糖苷的高效阴离子交换色谱积分脉冲安培检测法。在最佳的分离条件下,蔗糖和甘油葡糖苷的质量浓度在0.1~50.0 mg/L范围内与色谱峰面积线性良好,线性相关系数r20.999 9。蔗糖和甘油葡糖苷的最低检测限分别是0.15 mg/L和0.03 mg/L,测定结果的相对标准偏差小于2%(n=8)。该方法样品处理简单,无基体干扰,测定的准确度,灵敏度高,可应用于蓝藻培养液中蔗糖和甘油葡糖苷的测定。     

Electrochemical behavior of PbO2/PbSO4 electrode in the presence of surfactants in electrolyte

The electrochemical behavior of PbO₂/PbSO₄ electrode is investigated in 4.5 M H₂SO₄ in presence of three surfactants, Sodium Dodecyl Sulfate (SDS), Cetyltrimethylammonium bromide (CTAB) and Sodium tripolyphosphate (STPP), using cyclic voltametry, electrochemical spectroscopy impedance and galvanostatic discharge as techniques. The micro morphology of the surface of the modified PbO₂ electrodes is examined by scanning electron microscopy. The results show that SDS and CTAB when added in the electrolyte could refine the coating particles and change the roughness of the surface of the electrode leading to a thin film of PbO₂ with amorphous character. In addition, SDS and CTAB shift the hydrogen evolution potential towards more negative values, improve the discharge capacity of the anodic layer and accelerate the charge transfer. Under cathodic polarization, CTAB presents the lowest value of the charge transfer resistance R_ct. In the contrary, STPP shifts the oxygen evolution potential towards more positive values, passivates the surface of the electrode and inhibits completely the reaction of PbO₂ formation.     

低压太阳能草坪灯驱动控制器的设计与仿真

设计一种能在0.8V下工作的低压太阳能发光二极管草坪灯驱动控制器.控制充电回路通断的开关管集成在芯片内部,系统只需外接一个电感和光敏电阻.该驱动电路具有光开关自动控制放电、蓄电池过放迟滞保护等功能,且发光二极管灯无闪烁.仿真结果表明,芯片的工作电压为0.8～1.5V,输出平均电流在3～300 mA内可调,发光二极管灯效...