多组分光谱相关色谱及其在中药色谱指纺图谱分析中的应用

基于正交投影理论和相关色谱方法提出多组分光色谱方法提出多组分光谱相关 色谱。为克服联用色谱仪器的不等性噪声影响，采用目标组分投影前后的光谱夹角 余弦判据，判断不同的中药色谱指纹图谱的相关组分色谱峰簇。该方法为中药指纹 图谱的数据处理、合理评价以及中药谱效学的基本理论研究提供一种实用的工具。     

Investigation on False Peak Phenomena in On-line Sweeping Technique in MEKC

ＩｎｔｒｏｄｕｃｔｉｏｎＭｉｃｅｌｌａｒｅｌｅｃｔｒｏｋｉｎｅｔｉｃｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＭＥＫＣ)ｗａｓｉｎｖｅｎｔｅｄｔｏｅｘｔｅｎｄｔｈｅｕｔｉｌｉｔｙｏｆｃａｐｉｌｌａｒｙｅｌｅｃｔｒｏｐｈｏｒｅｓｉｓ(ＣＥ)ａｎｄｐｅｒｍｉｔｔｅｄｔｈｅｓｅｐａｒａｔｉｏｎａｎｄａｎａｌｙｓｉｓｏｆｎｅｕｔｒａｌｃｏｍｐｏｕｎｄｓ .ＢｕｔｊｕｓｔｌｉｋｅｏｔｈｅｒｍｏｄｅｓｏｆＣＥ ,ＭＥＫＣａｒｅｈａｍｐｅｒｅｄｂｙｔｈｅｌｏｗｃｏｎｃｅｎｔｒａｔｉｏｎｓｅｎｓｉｔｉｖｉｔｙｏｆｔｈｅｕｌｔｒａ …     

空间听觉与虚拟听觉空间的计算机仿真

一些科学工作者对人类以及动物听觉的自由声场至耳膜的传递函数进行了测量,他们发现在宽带信号激励的情况下,不同频率分量之间的幅度差异是与声源的方向有关的,这一发现已被用于展现“真实”的三维听觉,称作虚拟听觉空间仿真。     

具有变时滞的偏泛函微分方程平凡解的一致渐近稳定性

运用Ｒａｚｕｍｉｋｈｉｎ技巧．对两类具有变时滞的偏泛函微分方程进行了讨论．获得其平凡解一致渐近稳定的充分判别条件．     

多媒体通信的技术特点和主要应用

介绍了计算机通信的技术特点,简要这了多媒体通信的主要应用领域。     

TCP／IP体系结构

ＴＣＰ／ＩＰ是Ｉｎｔｅｒｎｅｔ网络进行信息传输和网络互连所使用的协议,随着Ｉｎｔｅｒｎｅｔ的飞速发展,ＴＣＰ／ＩＰ已成为事实上的国际标准和工业标准。本文对ＴＣＰ／ＩＰ的网络体系结构及其协议族作了概述介绍。     

高效液相色谱-电感耦合等离子体发射光谱联用的瞬时信号采集和处理软件及实际应用

本文对高效液相色谱-电感耦合等离子体原子发射光谱联用技术进行了研究.对所用ICAP-9000型等离子体原子发射光谱仪的控制采样程序进行了部分修改,采集的数据通过异步串行通讯方式由AppleⅡ微机传送至IBM PC286机进行处理。发展的瞬时信号采集程序能满足HPLC的检测要求,并将这一联用技术成功的用于砷的形态分析.     

Underpotential deposition studies of copper on glassy carbon

Studies on the deposition and dissolution of copper from 0·5 M sulphuric acid solutions onto glassy carbon (GC) using potential sweep techniques indicated that an additional peak occurs at higher positive potentials than the bulk stripping peak. This peak is identified as due to the stripping of underpotential deposited (UPD) copper. Results of investigations on the effect of sweep rate, deposition potential and time of deposition on the peak characteristics of UPD and bulk deposited copper are also reported.     

New stationary phases of conjugated π-electron systems for HPLC—characterization of structure and dynamics by solid state NMR spectroscopy

Four new stationary phases for HPLC were prepared by modifying silica gel with a trifrnctional aminoalkyl silane. A conjugated π-electron system was linked to the amino group either directly or with a carboxylic anhydride as a spacer in between. Characterization and dynamic measurements of the new stationary phases were performed by solid state NMR spectroscopy. The results of the ²⁹si and ¹³C CP/MAS techniques were compared with the recently developed ¹H MAS-only technique. Despite strong homonuclear dipole-dipole interactions it was possible to obtain well resolved ¹H MAS spectra of those stationaru phases with a high degree of crosslinking. Limited mobility of the aromatic ligand fragments is common for all examined stationaryu phases. The chromatographic properties of the new phases were tested by their ability tio sepatate a mixture of eight PAHS. It could be shown that the π-π interaction mechanism is responsible for the separation of the eight PAHs, because the elution order of the PAHs did not changem despite the use of both a nonpolar mobile phase (n-heptane) and a polar mobile phase (methanol/ water mixture).     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.