386微机稳压电源的电路分析及改进

ＭＰＵ－２００Ｐ型３８６微机电源是典型的半桥式脉宽调制型开关稳压电源。本文对它的工作原理进行了分析，并提出一种改进的方法。     

群色散光纤中高强度光脉冲传输与压缩的研究

考虑非线性四阶折射率,推导了光脉冲在群色散单模光纤中传输的非线性方程,并得到孤子型解析解.同时指出在Sech型光纤脉冲压缩实验中,光强度的阈值.     

单模光纤中皮秒啁啾脉冲压缩

对单模光纤正群速色散区秒啁啾脉冲的非线性传进行了近似的解析分析和定量的数值计算。结果表明，负啁啾脉冲在传输过程中能得到有效压缩。压缩比与脉冲初始峰值功率和初始啁啾程度有关。初始峰值功率一定的脉冲，其压缩比随初始啁啾程度的增大面大，初始啁啾程度一定的脉冲，压缩比随初始峰值功率的增大而减小，表明自相位调制效应导致脉冲压缩效果变差。计算结果还表明，在脉冲时域宽度得到压缩的同时，光谱宽度也能得到同步压缩。     

捷变频雷达积累脉冲数的分析与研究

在捷变频条件下 ,通过对等效独立采样脉冲数和积累增益的分析和研究 ,提供有效抑制海浪杂波的方法     

利用CARS方法研究超短脉冲激光的脉冲宽度

在理论上提出了利用两光束CARS/CSRS方法测量超短脉冲激光的三阶相关函数。实验上在几种样品中测量了CARS/CSRS的时间特性,得到了泵浦光脉冲,SCDL输出光脉冲以及受激喇曼散射光脉冲的宽度。     

Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

A Modified Szilard Engine: Measurement, Information, and Maxwell's Demon

Using an isolated measurement process, we calculate the effect measurement has on entropy for the multi-cylinder Szilard engine. We find that the system of cylinders possesses an entropy associated with cylinder total energy states, and that it records information transferred at measurement. Contrary to other's results, we find that the apparatus loses entropy due to measurement. The Second Law of Thermodynamics may be preserved if Maxwell's demon gains entropy moving the engine partition.     

设备诊断专家系统的层次诊断模型

本文在讨论复杂机电系统故障特征之后,提出了诊断专家系统的层次诊断模型.该模型以对象系统的结构分级为基础,使用作者提出的征兆分析法、功能分析法和综合信号分析法等三种具体诊断方法,得到了分层适应诊断的层次诊断模型.最后介绍了以层次诊断模型为基础的汽车发动机诊断专家系统的概况.     

电控发动机喷油脉宽的分析

本文介绍了利用喷油脉宽大小的变化来分析电控发动机电控系统、燃油供给等系统故障的一种方法,在汽车故障检测与诊断中有着广泛的应用。