分析信号处理方法的比较研究

研究了高效液相色谱－火焰原子吸收光谱联用系统分析信号处理方法，比较了各种处理方法的优缺点，用积分与适应平滑法综合处理色谱峰分析信号，不仅能有效地消除噪声，而且能使分析信号得到加强，以测定镍为例，经积分与适应平滑法综合处理后，检出限改善了２．７倍。     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

Thermal degradation of vinylidene chloride/vinyl chloride copolymers in the presence of N-substituted maleimides

As a consequence of their excellent barrier properties vinyl chloride/vinylidene chloride copolymers have long been prominent in the flexible packaging market. While these polymers possess a number of superior characteristics, they tend to undergo thermally- induced degradative dehydrochlorination at process temperatures. This degradation must be controlled to permit processing of the polymers. Three series of N-substituted maleimides (N-alkyl-, N-aralkyl, and N-aryl) have been synthesized, characterized spectroscopically, and evaluated as potential stabilizers for a standard vinyl chloride/vinylidene chloride (85 mass%) copolymer. As surface blends with the polymer, these compounds are ineffective as stabilizers. However, significant stabilization may be achieved by pretreatment of the polymer with N-substituted maleimides. The most effective stabilization of the polymer is afforded by N-aralkyl- or N-arylmaleimides, most notably, N-benzylmaleimide and N-p-methoxyphenylmaleimide.     

基于Bert股吧舆情分析的特征融合股价走势预测研究

传统股价预测模型往往只考虑时序性数据且局限于模型自身机制,而忽略舆情对股价的影响,导致预测精度不高,针对该问题,提出基于 Bert 股吧舆情分析的特征融合预测模型对股价收盘价进行涨跌幅预测。 首先,采用Bert 自然语言处理对股吧舆情以及公司公告政策进行情感分类,并转化为虚拟变量,构建金融舆情情感特征库;然后将金融舆情特征库和时序性数据合并构建特征融合矩阵;最后输入长短期记忆网络模型(LSTM)进行股价收盘价预测,并得出股价的涨跌结果。 以华银电力(600744. SH)为例进行实证分析,实验结果表明:引入股票情感特征后的模型,得到的股价走势准确率上升了 8. 63%,预测收盘价的回归指标 FMAPE FRMSE 分别下降了 23. 59%、22. 9%,R2 提高了 8. 11%,证明引入新的舆情情感特征在实际预测中能提高股价预测的准确率,可以作为精准预测股价走势的手段。     

用最小均方误差对数短时谱幅值估计法增强语音信号

本文主要研究语音增强系统在短时频域内,以对数最小均方误差作为语音幅值估计的准则.对含噪语音进行消噪处理。首先推导了公式,并从理论上作了分析研究.在此基础上作了大量实验,与类似的最小均方误差短时谱幅值估计法(MMSE STSA)作了性能比较.实验结果表明,由MMSE LOG-STSA增强方法得到的语音输出的质量优于由MMSA STSA方法得到的质量.语音的失真度和清晰度均有显著改善,同时大大降低了语音中的“音乐噪声”.     

乌龙茶做青环境微机控制系统硬件与接口设计

本文介绍乌龙茶做青环境电脑控制系统中的温、湿度测量、A/D转换卡、输出控制电路的硬件、接口设计原理以及系统软件与控制方式。该系统对乌龙茶做青生产过程的环境能进行自动巡回检测,控制温、湿度达到最佳状态,并使生产过程自动化。     

卫星遥感资料存档系统的研究

卫星遥感资料存档系统是３Ｓ系统研究领域之一,分析了由作者设计的存档分析试验系统的基本框架,数据结构,索引方式及查询方式,讨论了资料存档及常规处理方法的结合,对于图象,图形及属性数据显示采用了统一的处理过程。     

离散正交小波包及其在噪声抑制中的应用

研究有限长序列的小波包处理和噪声抑制的方法,方法用正交共轭滤波器构造有限维内积空间的正交值和分解及有限长离散小波包,分析了噪声的小波包分解系数的特性,并提出小波包变换域降噪的方法。     

基于分维计算的颗粒粒度分析方法

提出了一种基于分形检测超细颗粒粒度的新方法及实现算法,超细颗粒在一定条件下产生布朗运动,通过光电系统记录的图象可看成是群体颗粒无规则漫游的结果,从而可用分数布朗运动模型去描述,对所获取的超强微粒布朗运动图象进行处理,然后按以上分形模型进行逐点的分维计算,再用统计的方法转换为粒度信息,从而实现粒度测量,文中给出了具体的算法及算例。     

磨料水射流切削金属表面涂层薄铁的加工性研究(英文)

以试验研究数据为依据,对磨料水射流切削金属表面涂层薄铁的可加工性进行了详细的分析与研究。结果表明,磨料水射流加工技术能够在该种材料上切削出高质量地切口,且生产率较高。还对很多切口特性与加工参数之间的关系进行了全面的讨论,由此推荐了最好的加工参数并建立了切口的几何及质量经验公式,以用于加工过程的控制和优化。