成像光谱技术中机上实时数据压缩方法研究

根据成像光谱仪的特点用一系列串行的一维压缩实现二维图像压缩.提出了在机上对原始数据从光谱方向进行实时压缩的“二真值线性预测方法”.该法可做到压缩/复原后光谱特征信息不丢失.实验表明,对大多数光谱数据在1%的重建精度下,至少可获得2:1的压缩比.从总体而言,压缩后原始数据率可降低3～4倍.文中还对压缩数据的编码和误差进行了讨论.     

微型计算机中西文表格自动处理软件的算法设计

本文讨论了在微机中西文表格自动处理技术中一些特殊功能的算法设计,分析了设计思想,提供了部份实用算法,并对某些算法的时间复杂度进行了评述。这些算法均已在本校研制的“IBM-PC/XT微型机中西文数据库管理系统”的表格自动处理软件中实现,并已应用于百多家企、事业单位的计算机管理系统中。     

傅里叶变换技术在紫外可见光谱区的应用

本文评述了傅里叶变换在紫外可见光谱区的应用，探讨了傅里叶变换在紫外可见光谱学以及信号处理两方面的内容。详细介绍了傅里叶变换在紫外可见区遇到的问题、主要优点和发展前景。     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Mechanochemical Preparation of Water-Soluble Forms of Triterpene Acids

A waste-free technology for mechanochemical processing of fir needles into a biologically active preparation that regulates plant growth was developed. A preparation exhibiting cytokinin activity due to the presence in it of water-soluble forms of triterpene acids can be prepared using the proposed method. The effectiveness of the proposed method was confirmed by instrumental methods and biological tests.     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

微机控制离子色谱仪自动操作与数据处理系统

用转换器和ＩＢＭＰＣ／ＸＴ微机与Ｄｉｏｎｅｘ２０２０ｉ型离子色谱仪连接组成自动控制与数据处理系统，转换器由８０３１及８２５５等芯片组成，其功能是采集数据和转送数据，软件由汇编及Ｃ语言编制。这套新系统增加了注入／记录同步，分级梯度淋洗，自动连续进样等功能以及很强的数据处理能力。     

聚双环戊二烯反应注射成型

本文介绍了国外有关聚双环戊二烯反应注射成型的研究进展，讨论了国内进行聚双环戊二烯反应注射成型开发研究的现实意义，并对这一领域的发展进行了展望     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.